Sustainable consumption in Brazil: Identification of preliminary requirements to guide product development and the definition of public policies

Sustainable product development is closely related to sustainable consumption. The understanding of consumers' purchase, use and discard behaviours may facilitate the identification of requirements to guide manufacturers in the development of sustainable goods and services. The aim of this paper is to investigate consumers' perception about factors that motivate or discourage the consumption of sustainable products to identify demands and convert them into requirements. South Brazilian green and traditional consumers were asked to complete an exploratory qualitative questionnaire. Their answers were organized and compared to identify differences and similarities between the demands of these two groups. Furthermore, demands were converted into requirements for packages, products, manufactures, stores planning and discard systems. The interpretation of factors that motivate or discourage the purchase of sustainable products given by interviewees led to the creation of a list of possible public policies or programmes, aiming to support sustainable consumption. The results demonstrate the necessity of further quantitative investigation between consumer groups, for validation purposes.     

Effects of atrazine and nicosulfuron on freshwater microalgae

Growth modifications caused by various concentrations of atrazine and nicosulfuron were monitored in closed and continuous culture of Chlorella vulgaris (chlorophyta), Navicula accommoda (diatomophyta), and Oscillatoria limnetica (cyanophyta). The concentration at which algal growth rate was reduced twofold (EC50) was determined in the three species for both herbicides. Comparatively, the two toxicants were applied at 10 microg/l level in microcosms inoculated with natural phytoplankton from Lake Geneva. The relative abundances of major phytoplanktonic species were measured by algal cell count at the beginning and at the end of each experiment. Atrazine and nicosulfuron have different targets in plant metabolism, respectively, photosystem II (PSII) and acetolactate synthase (ALS), and the expected effects were different. Generally, the cultured phytoplankton exhibited various sensitivities, depending on species or herbicide. In the microcosms, the major taxa of natural phytoplanktonic samples exhibited various patterns, from acute toxicity to growth enhancement. For example, the diatoms inside the community were not affected by atrazine and nicosulfuron, except for Stephanodiscus minutulus that was sensitive to both, and Asterionella/formosa that was sensitive only to nicosulfuron. The specific physiology and the relationships among the phytoplanktonic communities have to be carefully considered when one would try to predict the extent of herbicide action on natural phytoplankton using in vitro tests. There is a need to test the toxic effect on various cultured strains, representative of most of the taxonomic composition of natural communities, to take into account the wide range of sensitivities and reaction to herbicide contamination. But this is not enough to give a solid frame when transposing the results to the field, and the use of more ecologically relevant systems is recommended.     

Integrated measures for preservation, restoration and improvement of the environmental conditions of the Lagoon Olho d'Água basin

The Lagoon Olho d'Água in Pernambuco State, Northeast Brazil has received increasing environmental concern due to significant stress from pollution in the catchment. The existing environmental problems are the result of great pressure from a broad range of human activities, especially in the last 10 years. Serious pollution exists mainly from some industrial and urban activities, which increased intensively after the eighties. There is a strong social and economical pressure for housing and construction near the lagoon, due to the available land nearby beaches and estuarine zone, and recently by growing tourism activities. Uncontrolled land use by low-income communities and the pressure for construction by developers have led to landfilling and to deterioration of water quality in the lagoon catchment. Improvement of the environmental conditions in the catchment needs integrated measures. Guidelines and some specific actions involving several institutions have been established and refer to sanitation and urban infrastructure as the main priorities. A main target is the construction of low-cost sewage system with smaller and decentralised treatment plants.     

Isotope tracing of submarine groundwater discharge offshore Ubatuba, Brazil: results of the IAEA–UNESCO SGD project

Results of groundwater and seawater analyses for radioactive (³H, ²²²Rn, ²²³Ra, ²²⁴Ra, ²²⁶Ra, and ²²⁸Ra) and stable (D and ¹⁸O) isotopes are presented together with in situ spatial mapping and time series ²²²Rn measurements in seawater, direct seepage measurements using manual and automated seepage meters, pore water investigations using different tracers and piezometric techniques, and geoelectric surveys probing the coast. This study represents first time that such a new complex arsenal of radioactive and non-radioactive tracer techniques and geophysical methods have been used for simultaneous submarine groundwater discharge (SGD) investigations. Large fluctuations of SGD fluxes were observed at sites situated only a few meters apart (from 0 cm d⁻¹ to 360 cm d⁻¹; the unit represents cm³/cm²/day), as well as during a few hours (from 0 cm d⁻¹ to 110 cm d⁻¹), strongly depending on the tidal fluctuations. The average SGD flux estimated from continuous ²²²Rn measurements is 17 ± 10 cm d⁻¹. Integrated coastal SGD flux estimated for the Ubatuba coast using radium isotopes is about 7 × 10³ m³ d⁻¹ per km of the coast. The isotopic composition (δD and δ¹⁸O) of submarine waters was characterised by significant variability and heavy isotope enrichment, indicating that the contribution of groundwater in submarine waters varied from a small percentage to 20%. However, this contribution with increasing offshore distance became negligible. Automated seepage meters and time series measurements of ²²²Rn activity concentration showed a negative correlation between the SGD rates and tidal stage. This is likely caused by sea level changes as tidal effects induce variations of hydraulic gradients. The geoelectric probing and piezometric measurements contributed to better understanding of the spatial distribution of different water masses present along the coast. The radium isotope data showed scattered distributions with offshore distance, which imply that seawater in a complex coast with many small bays and islands was influenced by local currents and groundwater/seawater mixing. This has also been confirmed by a relatively short residence time of 1–2 weeks for water within 25 km offshore, as obtained by short-lived radium isotopes. The irregular distribution of SGD seen at Ubatuba is a characteristic of fractured rock aquifers, fed by coastal groundwater and recirculated seawater with small admixtures of groundwater, which is of potential environmental concern and has implications on the management of freshwater resources in the region.     

Characterisation of heavy metal discharge into the Ria of Huelva

The Ria of Huelva estuary, in SW Spain, is known to be one of the most heavy metal contaminated estuaries in the world. River contribution to the estuary of dissolved Cu, Zn, Mn, Cr, Ni, Cd, and As were analysed for the period 1988-2001. The obtained mean values show that this contribution, both because of the magnitude of total metals (895.1 kg/h), composition, toxicity (8.7 kg/h of As+Cd+Pb) and persistence, is an incomparable case in heavy metal contamination of estuaries. The amount and typology of heavy metal discharge to the Ria of Huelva are related to freshwater flow (and, consequently, to rainfall); as a result, two different types of heavy metal discharge can be distinguished in the estuary: during low water (50% of the days), with only 19.3 kg/h of heavy metals, and during high water or flood (17% of the days), where daily maximum discharge of 72,475 kg of heavy metals were recorded, from which 1481 kg were of As, 470 kg of Pb, and 170 kg of Cd. In the most frequent situation (77% of the days), the Odiel River discharges from 90% to 100% of the freshwater received by the estuary. Despite this, the high concentration of heavy metals in the Tinto River water causes this river to discharge into the Ria of Huelva 12.5% of fluvial total dissolved metal load received by the estuary.     

When experts disagree: the need to rethink indicator selection for assessing sustainability of agriculture

Sustainability indicators are well recognized for their potential to assess and monitor sustainable development of agricultural systems. A large number of indicators are proposed in various sustainability assessment frameworks, which raises concerns regarding the validity of approaches, usefulness and trust in such frameworks. Selecting indicators requires transparent and well-defined procedures to ensure the relevance and validity of sustainability assessments. The objective of this study, therefore, was to determine whether experts agree on which criteria are most important in the selection of indicators and indicator sets for robust sustainability assessments. Two groups of experts (Temperate Agriculture Research Network and New Zealand Sustainability Dashboard) were asked to rank the relative importance of eleven criteria for selecting individual indicators and of nine criteria for balancing a collective set of indicators. Both ranking surveys reveal a startling lack of consensus amongst experts about how best to measure agricultural sustainability and call for a radical rethink about how complementary approaches to sustainability assessments are used alongside each other to ensure a plurality of views and maximum collaboration and trust amongst stakeholders. To improve the transparency, relevance and robustness of sustainable assessments, the context of the sustainability assessment, including prioritizations of selection criteria for indicator selection, must be accounted for. A collaborative design process will enhance the acceptance of diverse values and prioritizations embedded in sustainability assessments. The process by which indicators and sustainability frameworks are established may be a much more important determinant of their success than the final shape of the assessment tools. Such an emphasis on process would make assessments more transparent, transformative and enduring.     

Anticipatory capacity in response to global change across an extreme elevation gradient in the Ica Basin,Peru

Regional Environmental Change - Mountainous areas with extreme elevation gradients and corresponding ranges of biophysical and socioeconomic conditions are highly vulnerable to global change. We...     

Economic viability and optimization of solar microgrids with hybrid storage in a non-interconnected zone in Colombia

Environment, Development and Sustainability - A developing country that does not have adequate energy solutions in non-interconnected zones (ZNIs) undoubtedly experiences adverse effects in terms...     

Brazil's Electric Power Choices and Their Corresponding Carbon Emissions Implications

This study analyzes the options for meeting power demand in the Brazilianpower sector through the year 2015. Three policy cases are constructedto test economic and environmental policy measures against a baseline:advanced technologies scenario, environmental control scenario and carbon(C) elimination scenario. Least-cost modeling simulated these scenarios throughchanges in emissions fees and caps, costs for advanced technologies,demand side efficiency, and clean energy supplies. Results show that, in theabsence of alternative policies, new additions to Brazil's electric powersector will shift rapidly from hydroelectricity to combined-cycle natural gasplants. When the cost of environmental impacts are incorporated in theprice of power, the least-cost mix of electric power generation technologycould change in other ways. In all scenarios, energy efficiency andcogeneration play an important role in the least-cost power solution. Savingelectricity through increased efficiency offsets the needs for new supply andhas enormous potential in Brazil's industrial sector. Efficiency also reducesthe environmental burden associated with electricity production andtransmission, without compromising the quality of the services demandedby end users. Interesting enough, carbon dioxide (CO₂) emissions will remainrelatively low under almost every conceivable scenario.     

Framing the Long-Term <Emphasis Type="Italic">In Situ</Emphasis> Liability Issue for Geologic Carbon Storage in the United States

This paper examines how legal standards of liability may apply to geologic carbon storage. The liability regime governing geologic carbon storage will shape the technology's cost-effectiveness and overall attractiveness. We classify potential sources of liability into operational, in situ, and climate liability. As a first step, we explore in situ liability in the United States. After summarizing legal standards of liability including negligence, breach of implied warranty, strict liability, and product liability, we discuss how liability may be addressed at the level of the federal government, state government, industry, and the firm. Finally, we address the implications of judicial treatment of liability for carbon storage, including the apportionment of liability and the adequacy of current regulations.