Reproductive cycle of Golfingia margaritacea,a bipolar sipunculan,in subantarctic water

The reproductive cycle of the bipolar sipunculan Golfingia margaritacea collected from Ushuaia, Argentina (54°49 S; 68°13W) in 1986 and 1987 is reported. The population sampled showed a sex ratio of 1:1. Males, however, frequently outnumbered females. Measurements of coelomic oocytes delineated an annual reproductive cycle. Small oocytes were present in the coelom all year: a subpopulation began to increase size about the middle of spring and reached its maximum size in late summer. Spawns may occur from the end February to April. May is characterized by resorption of large oocytes. Monthy monitoring of the gonads revealed mitotic activity and a continuous release of gametocytes to the coelom. Parasites were detected in the gonads. Large coelomic oocytes were also present in the coelom during the same season in the Northern and Southern Hemispheres, but egg sizes were significantly larger in boreal populations.     

Landfill leachate enhances fermentative hydrogen production from glucose and sugarcane processing derivatives

Fermentation can use renewable raw materials as substrate, which makes it a sustainable method to obtain H₂. This study evaluates H₂ production by a mixed culture from substrates such as glucose and derivatives from sugarcane processing (sucrose, molasses, and vinasse) combined with landfill leachate. The leachate alone was not a suitable substrate for biohydrogen production. However, leachate blended with glucose, sucrose, molasses, or vinasse increased the H₂ production rate by 2.0-, 2.8-, 4.6-, and 0.5-fold, respectively, as compared with the substrates without the leachate. Determination of metals (Cu, Cd, Pb, Hg, Ni, and Fe) at the beginning and at the end of the fermentative assays showed how they were consumed during the fermentation and demonstrated improved H₂ production. During fermentation, Cu, Fe, and Cd were the most consumed leachate metals. The best substrate combination to produce H₂ was molasses and leachate, which gave high volumetric productivity—469 ml H₂/l h. However, addition of the leachate to the substrates stimulated lactic acid formation pathways, which lowered the H₂ yield. The use of leachate combined with sugarcane processing derivatives as substrates could add value to the leachate and reduce its polluting power, generating a clean energy source from renewable raw materials.     

Visitor-induced changes in the chemical composition of soils in backcountry areas of Mt Robson Provincial Park, British Columbia, Canada

Balancing recreation and conservation is an important issue in Canada's parks and protected areas. Increased levels of visitation to parks, especially to backcountry areas, create undue pressure on natural resources, resulting in a variety of ecological impacts. This paper illustrates the issue of visitor-induced changes on the chemical composition of soils in Mt Robson Provincial Park, British Columbia. Soil samples were collected from dish wash stations and fire pits (disturbed sites) at seven campgrounds located along two popular backcountry trails, and were compared to samples obtained from adjacent undisturbed control sites. Analysis of soil samples suggest that the lower amounts of aluminum, potassium, magnesium and sodium in many of the 'disturbed' samples can be related to intense leaching in dish wash stations, and can be attributed to frequent disposal of waste water from washing and cooking activities. Soils in wash stations generally had higher phosphorus, copper and zinc contents as compared to controls. Soils in fire pits were elevated in copper, relative to controls. Results of this study support park regulations that waste water disposal and camp fires be restricted to designated areas. Informing the public of scientific studies helps them understand the consequences of their activities; this may help persuade them to observe park rules and regulations.     

Local Responses to Participatory Conservation in Annapurna Conservation Area, Nepal

Biodiversity conservation has undergone a profound change in philosophy, policies and management approaches over the last forty years. The traditional top–down approach to nature protection has been widely criticized for failing to include critical social elements in management practices, and is being gradually replaced by a slew of participatory strategies under the rubric of bottom-up conservation. The new approach recognizes local communities as key partners in wildlife management and seeks their participation in social development and biodiversity conservation. However, every social context is different in its structure and functions, and in the way social groups respond to calls for participation. In order to gain a better understanding of the approach and the barriers encountered in its implementation, a questionnaire survey of 188 households was employed in the communities of the Upper Mustang extension of Annapurna Conservation Area (ACA) in Nepal. The study provides a comparative analysis of community participation and its barriers between Non-Tourist (NT) and Tourist (TV) villages. The results revealed important differences between the two groups in terms of their participation in community programs, barriers to participation, and perception of benefits from participation. Owing to their distinct spatial, demographic and attitudinal differences, the two village groups have their own sets of needs, values and motivation factors which cannot be generalized and treated as such. The research clearly identifies the need for the conservation agency to be creative in devising strategies and initiatives appropriate to specific social groups so as to optimize their input in participatory conservation.     

Indoor pollution and burning practices in wood stove management

This study evaluates effects of good burning practice and correct installation and management of wood heaters on indoor air pollution in an Italian rural area. The same study attests the role of education in mitigating wood smoke pollution. In August 2007 and winters of 2007 and 2008, in a little mountain village of Liguria Apennines (Italy), indoor and outdoor benzene, toluene, ethylbenzene, and xylene (BTEX) concentrations were measured in nine wood-heated houses. During the first sampling, several mistakes in heating plant installations and management were found in all houses. Indoor BTEX concentrations increased during use of wood burning. Low toluene/benzene ratios were in agreement with wood smoke as main indoor and outdoor pollution source. Other BTEX sources were identified as the indoor use of solvents and paints and incense burning. Results obtained during 2007 were presented and discussed with homeowners. Following this preventive intervention, in the second winter sampling all indoor BTEX concentrations decreased, in spite of the colder outdoor air temperatures. Information provided to families has induced the adoption of effective good practices in stoves and fire management. These results highlight the importance of education, supported by reliable data on air pollution, as an effective method to reduce wood smoke exposures.

Implications:Information about burning practices and correct installation and management of wood heaters, supported by reliable data on indoor and outdoor pollution, may help to identify and remove indoor pollution sources. This can be an effective strategy in mitigate wood smoke pollution.     

Framework for integrating sustainability into remediation projects

The US Sustainable Remediation Forum (SURF) created this Framework to enable sustainability parameters to be integrated and balanced throughout the remediation project life cycle, while ensuring long‐term protection of human health and the environment and achieving public and regulatory acceptance. Parameters are considerations, impacts, or stressors of environmental, social, and economic importance. Because remediation project phases are not stand‐alone entities but interconnected components of the wider remediation system, the Framework provides a systematic, process‐based approach in which sustainability is integrated holistically and iteratively within the wider remediation system. By focusing stakeholders on the preferred end use or future use of a site at the beginning of a remediation project, the Framework helps stakeholders form a disciplined planning strategy. Specifically, the Framework is designed to help remediation practitioners (1) perform a tiered sustainability evaluation, (2) update the conceptual site model based on the results of the sustainability evaluation, (3) identify and implement sustainability impact measures, and (4) balance sustainability and other considerations during the remediation decision‐making process. The result is a process that encourages communication among different stakeholders and allows remediation practitioners to achieve regulatory goals and maximize the integration of sustainability parameters during the remediation process. © 2011 Wiley Periodicals, Inc.     

Think globally,act locally: neighbourhood pollution and the future of the earth

Each year governments and industry around the globe spend billions of dollars in search of treatments and cures for diseases that shorten lives, which often means gadgets, implants, radiation and pills. These “cures”, do not get to the root of the problem. Perhaps it is time for us to adjust our thinking to be more proactive instead of reactive in public health. Perhaps we need to consider confronting environmental pollution of air, soil and water at a local level. As the Physicians for Social Responsibility point out, we should be “preventing what we cannot cure”. One such preventive measure is ensuring that our communities, including our poor inner-city neighbourhoods, enjoy a clean environment. We challenge local and national policy-makers to respond to the global call and to take action to address environmental toxins; to take local action to ameliorate the pollution of the air, water and soil in so many of our nation’s neighbourhoods. A person’s neighbourhood, and the proximity of dangerous environmental contaminants within it, is a powerful predictor of how long s/he will live. While situations like the poisoning of the water in Flint, Michigan have gotten some attention, they are generally treated as the exception rather than a reflection of real environmental hazards that exist in the west. Moreover we wonder why more endemic issues of neighbourhood environmental contamination that shorten human lives are not a priority for local action or that it is not linked to disproportionate production of greenhouse gases that cause climate change/warming/chaos.     

An observational study on changes in biometry and generation time of <Emphasis Type="Italic">Odontophora villoti</Emphasis> (Nematoda,Axonolaimidae) related to petroleum pollution in Bizerte bay,Tunisia

Introduction  

We conducted a yearly polluted-reference sampling to assess the effects of petroleum pollution on life cycle characteristics of the meiobenthic nematode Odontophora villoti. Samples were taken every 15 days between 26 November 2004 and 25 November 2005 from two beaches of Bizerte bay (Tunisia), Rimel and Tunisian Refining Industries Company (TRIC). The latter site is located in front of the “Tunisian Refining Industries Company” runoff.     

Fluoride removal from aqueous solution by direct contact membrane distillation: theoretical and experimental studies

Direct contact membrane distillation (DCMD) process using polyvinylidene fluoride (PVDF) membrane was used for fluoride removal from aqueous solution. This study has been carried out on heat and mass transfer analyses in DCMD. The dusty-gas model was used to analyze the mass transfer mechanism and to calculate the permeate flux. The heat transfer is analyzed based on energy balance, and the different layers are considered as a series of thermal resistances. Mass transfer analysis showed that the transition Knudsen-molecular diffusion is the dominant mechanism to describe the transport of water vapor through the pores of the PVDF membrane. The most significant operating parameter is the feed temperature. The permeate increases sensitively with feed temperature and velocity, and it shows insignificant change with feed salts concentration. Heat transfer analysis showed the conduction through the matrix of the membrane presents the major part of available energy. The increasing feed temperature leads to increase thermal efficiency (TE) and decrease temperature polarization coefficient (TPC). The experimental results are in good agreement with theoretical values. Therefore, it is suggested to work at high feed temperature, which will benefit both the thermal efficiency and permeate flux. The experimental results proved that DCMD process is able to produce almost fluoride-free water suitable for many beneficial uses.