Toxic effects of perfluorononanoic acid on the development of Zebrafish (Danio rerio) embryos

Perfluorononanoic acid(PFNA) is a nine-carbon perfluoroalkyl acid widely used in industrial and domestic products. It is a persistent organic pollutant found in the environment as well as in the tissues of humans and wildlife. There is a concern that this chemical might be a developmental toxicant and teratogen in various ecosystems. In the present study,the toxic effects of PFNA were evaluated in zebrafish(Danio rerio) embryos. One hour post-fertilization embryos were treated with 0, 25, 50, 100, 200, 300, 350, and 400 μmol/L PFNA for 96 hr in 6-well plates. Developmental phenotypes and hatching rates were observed and recorded. Nineteen genes related to oxidative stress and lipid metabolism were examined using Quantitative RT-PCR and confirmed by whole mount in situ hybridization(WISH). Results showed that PFNA delayed the development of zebrafish embryos, reduced the hatching rate, and caused ventricular edema and malformation of the spine. In addition, the amount of reactive oxygen species in the embryo bodies increased significantly after exposure to PFNA compared with that of the control group. The Quantitative RT-PCR and WISH experiments demonstrated that m RNA expression of the lfabp and ucp2 genes increased significantly while that of sod1 and mt-nd1 decreased significantly after PFNA exposure. The m RNA expression levels of gpx1 and mt-atp6 decreased significantly in the high concentration group. However, the m RNA expression levels of both ppara and pparg did not show any significant variation after exposure. These findings suggest that PFNA affected the development of zebrafish embryos at relatively low concentrations.     

An experimental and thermodynamic equilibrium investigation of the Pb, Zn, Cr, Cu, Mn and Ni partitioning during sewage sludge incineration

The effects of different chlorides and operational conditions on the distribution and speciation of six heavy metals (Pb, Zn, Cr, Cu, Mn and Ni) during sludge incineration were investigated using a simulated laboratory tubular-furnace reactor. A thermodynamic equilibrium investigation using the FactSage software was performed to compare the experimental results. The results indicate that the volatility of the target metals was enhanced as the chlorine concentration increased. Inorganic-Cl influenced the volatilization of heavy metals in the order of Pb > Zn > Cr > Cu > Mn > Ni. However, the effects of organic-Cl on the volatility of Mn, Pb and Cu were greater than the effects on Zn, Cr and Ni. With increasing combustion temperature, the presence of organic-Cl (PVC) and inorganic-Cl (NaCl) improved the transfer of Pb and Zn from bottom ash to fly ash or fuse gas. However, the presence of chloride had no obvious influence on Mn, Cu and Ni. Increased retention time could increase the volatilization rate of heavy metals; however, this effect was insignificant. During the incineration process, Pb readily formed PbSiO₄ and remained in the bottom ash. Different Pb compounds, primarily the volatile PbCl₂, were found in the gas phase after the addition of NaCl; the dominant Pb compounds in the gas phase after the addition of PVC were PbCl₂, Pb(ClO₄)₂ and PbCl₂O₄.     

Functional traits of poplar leaves and fine roots responses to ozone pollution under soil nitrogen addition

Concurrent ground-level ozone（O₃） pollution and anthropogenic nitrogen（N） deposition can markedly influence dynamics and productivity in forests.Most studies evaluating the functional traits responses of rapid-turnover organs to O₃ have specifically examined leaves,despite fine roots are another major source of soil carbon and nutrient input in forest ecosystems.How elevated O₃ levels impact fine root biomass and biochemistry remains to be resolved.This study was...     

Reduced biodegradation of benzonitrile in soil containing wheat-residue-derived ash

Burning of crop residues is a common agricultural practice that incorporates the resulting particulate matter (ash) of high adsorptivity into soils. To investigate the effect of ash on the biodegradation of pesticides in soils, we measured the sorption, desorption, and biodegradation of benzonitrile in a silt loam in the presence and absence of an ash resulting from burning of wheat (Triticum aestivum L.) residue. Biodegradation experiments were conducted by inoculating sorbent slurries with a pure culture of benzonitrile-degrading bacteria (Nocardia sp.). Both liquid- and sorbed-phase benzonitrile concentrations were quantified over time. The ash was approximately 2000 times more effective per unit mass than the soil in sorbing benzonitrile. Amendment of the soil with 1% ash (by weight) resulted in a 10-fold increase in sorption. Sorption of benzonitrile by the ash significantly decreased the solution-phase concentration in the slurries of ash and ash-amended soil. Desorption of benzonitrile from the ash required approximately 60 min to complete, whereas approximately 20 min were required for desorption from the soil. Benzonitrile in the extracts of various sorbents and soil slurry was completely degraded within 500 min. However, the degradation was substantially reduced in the presence of the ash. At 2000 min, only 20% of benzonitrile in ash slurry and only 44% in ash-amended soil slurry were degraded. An acclimation period of approximately 100 min was observed in extracts and slurries containing the ash. Substantial reduction in the biodegradation of benzonitrile in the presence of wheat ash was apparently due to sorption of benzonitrile by the ash, slow desorption from the ash, and the increased acclimation period. Our results suggest that the presence of crop-residue-derived ash may increase the persistence of pesticides in agricultural soils.     

Sorption and cosorption of organic contaminant on surfactant-modified soils

Three kinds of soils were modified with the cationic surfactants, hexadecyltrimethylammonium (HDTMA) bromide and tetramethylammonium (TMA) bromide to increase their sorptive capabilities. Sorption of chlorobenzene in simulated groundwater by these soils was investigated. HDTMA-modified soil has a higher ability to sorb chlorobenzene from simulated groundwater than unmodified soil. TMA-modified soil did not show the superiority. HDTMA thus can be used to modify soil to improve its sorption capability. Cosorption of chlorobenzene in simulated groundwater in the absence or presence of nitrobenzene and dichloromethane on HDTMA-modified soil was also investigated. Nitrobenzene facilitated sorption of chlorobenzene on all HDTMA-modified soil. Dichloromethane did not influence the sorption of chlorobenzene by HDTMA-modified soil. The results suggest that HDTMA-modified soil is a highly effective sorbent for chlorobenzene and multiple organic compounds did not impede the uptake of chlorobenzene.     

Influence of pH on pesticide sorption by soil containing wheat residue-derived char

Field burning of crop residues incorporates resulting chars into soil and may thus influence the environmental fate of pesticides in the soil. This study evaluated the influence of pH on the sorption of diuron, bromoxynil, and ametryne by a soil in the presence and absence of a wheat residue-derived char. The sorption was measured at pHs approximately 3.0 and approximately 7.0. Wheat char was found to be a highly effective sorbent for the pesticides, and its presence (1% by weight) in soil contributed >70% to the pesticide sorption (with one exception). The sorption of diuron was not influenced by pH, due to its electroneutrality. Bromoxynil becomes dissociated at high pHs to form anionic species. Its sorption by soil and wheat char was lower at pH approximately 7.0 than at pH approximately 3.0, probably due to reduced partition of the anionic species of bromoxynil into soil organic matter and its weak interaction with the carbon surface of the char. Ametryne in its molecular form at pH approximately 7.0 was sorbed by char-amended soil via partitioning into soil organic matter and interaction with the carbon surface of the char. Protonated ametryne at pH approximately 3.0 was substantially sorbed by soil primarily via electrostatic forces. Sorption of protonated ametryne by wheat char was also significant, likely due not only to the interaction with the carbon surface but also to interactions with hydrated silica and surface functional groups of the char. Sorption of ametryne by char-amended soil at pH approximately 3.0 was thus influenced by both the soil and the char. Environmental conditions may thus significantly influence the sorption and behavior of pesticides in agricultural soils containing crop residue-derived chars.     

Influence of modified soils on the removal of diesel fuel oil from water and the growth of oil degradation micro-organism

Three soils were modified with two kinds of cationic surfactants in order to increase their sorptive capabilities for organic contaminants. Sorption of diesel fuel oil in water by these modified soils had been investigated. Modified soils can effectively sorb diesel fuel oil from water. The sorption capability of modified soils is: HDTMA-black soil > HDTMA-yellow brown soil > HDTMA-red soil > TMA-black soil > TMA-yellow brown soil > TMA-red soil. Sorption of diesel fuel oil by natural soils and HDTMA modified soils is via partition, the sorption isotherms can be expressed by Henry equation, and logK(SOM) is 2.42-2.80, logK(HDTMA) is 3.37-3.60. Sorption isotherms of TMA modified soils can be expressed by Langmuir equation, the saturation sorption capacities are 1150 (TMA-black soil), 750 (TMA-yellow-brown soil), 171 mg/kg (TMA-red soil), respectively. A diesel fuel oil degradation micro-organism (Pseudomonas sp.) was isolated in the lab. To test the influence of the modified soils on the micro-organism, various growth curves of Pseudomonas in different conditions were drawn. Pseudomonas can grow very well with natural soils and TMA modified soils. The acclimation period of Pseudomonas is reduced. As to HDTMA modified soils, HDTMA loading amount is very important. When HDTMA loading amount is no higher than 0.5 CEC, the micro-organism can grow very well after a long acclimation period.     

Enhanced hepatotoxicity induced by repeated exposure to polychlorinated biphenyls and 2,3,7,8-tetrachlorodibenzo-p-dioxin in combination in male rats

2,3,7,8-Tetrachlorodibenzo-p-dioxin(TCDD) and polychlorinated biphenyls(PCBs) are among persistent polyhalogenated aromatic hydrocarbons that exist as complex mixtures in the environment worldwide.The present study was attempted to investigate the hepatotoxicity following repeated exposure to TCDD and PCBs in combination in male rats,and to reveal the involvement of potential mechanisms.Male Sprague-Dawley rats were exposed to TCDD(10 μg/kg) and Aroclor 1254(10 mg/kg,a representative mixture of PCBs) alone ...     

Total pollution effect of urban surface runoff

For pollution research with regard to urban surface runo , most sampling strategies to date have focused on di erences in land usage. With single land-use sampling, total surface runo pollution e ect cannot be evaluated unless every land usage spot is monitored. Through a new sampling strategy known as mixed stormwater sampling for a street community at discharge outlet adjacent to river, this study assessed the total urban surface runo pollution e ect caused by a variety of land uses and the pollutants washed o from the rain pipe system in the Futian River watershed in Shenzhen City of China. The water quality monitoring indices were COD (chemical oxygen demand), TSS (total suspend solid), TP (total phosphorus), TN (total nitrogen) and BOD (biochemical oxygen demand). The sums of total pollution loads discharged into the river for the four indices of COD, TSS, TN, and TP over all seven rainfall events were very di erent. The mathematical model for simulating total pollution loads was established from discharge outlet mixed stormwater sampling of total pollution loads on the basis of four parameters: rainfall intensity, total land area, impervious land area, and pervious land area. In order to treat surface runo pollution, the values of MFF30 (mass first flush ratio) and FF30 (first 30% of runo volume) can be considered as split-flow control criteria to obtain more e ective and economical design of structural BMPs (best management practices) facilities.     

Experimental study of photooxidation products of ethylbenzene

Smog chamber experiments were performed to investigate the composition of products formed from photooxidation of aromatic hydrocarbon ethylbenzene. Vacuum ultraviolet photoionization mass spectrometer and aerosol time-of-flight mass spectrometer were used to measure the products in the gas and particle phases in real-time. Experimental results demonstrated that ethylphenol, methylglyoxal, phenol, benzaldehyde, and 2-ethylfurane were the predominant photooxidation products in both the gas and particle phases. However, there were some di erences between detected gas phase products and those of particle phase, for example, 2-ethylfurane, ethylglyoxylic acid, nitroethylbenzene, 3,4-dioxopentanal and ethyl-nitrophenol were only existing in the particle-phase. The possible reaction mechanisms leading to these products were also discussed and proposed.