Means to improve the effect of in situ bioremediation of contaminated soil: an overview of novel approaches

Different aspects of bacterial degradation of organic contaminants in soil, and how to improve the efficiency and reproducibility is discussed in this review. Although bioremediation in principle includes the use of any type of organism in improving the condition of a contaminated site, most commonly bacteria are the degraders and other organisms, such as soil animals or plant roots, play a role in dissemination of bacteria and, indirectly, plasmids between bacteria, and in providing nutrients and co-substrates for the bacteria active in the degradation process. There are a number of different procedures that have been tested more-or-less successfully in attempts to improve reliability, cost efficiency and speed of bioremediation. The methods range from minimal intervention, such as mere monitoring of intrinsic bioremediation, through in situ introduction of nutrients and/or bacterial inocula or improvement of physico-chemical conditions, all the way to excavation followed by on site or ex situ composting in its different varieties. In the past the rule has been that more intervention (leading to higher costs) has been more reliable, but novel ideas are continuously tried out, both as a means to come up with new truly functional applications and also as a line of studies in basic soil microbial ecology. Both approaches generate valuable information needed when predicting outcome of remediation activities, evaluating environmental risks, deciding on cleaning-up approaches, etc. The emphasis of this review is to discuss some of the novel methods for which the value has not been clearly shown, but that in our view merit continued studies and efforts to make them work, separately or in combination.     

垃圾填埋场渗滤液运移规律分析与模拟

基于多孔介质流体力学、多相流以及土壤水动力学理论,利用理论分析和数值模拟相结合的方法,研究了垃圾填埋场中渗滤液运移过程的基本规律,并对填埋场底部可渗和不可渗2种情况下渗滤液的运移规律进行了模拟比对,研究成果可为填埋场渗滤液控制系统的设计和管理提供科学的理论依据和技术支持。     

Municipal solid waste characteristics and management in China

The purpose of this investigation is to evaluate the current status and identify the problems of municipal solid waste (MSW) management in China in order to determine appropriate remedial strategies. This is the first of two papers, discussing primarily the general characteristics of MSW and its management in China. The second paper focuses on specific remedial strategies. MSW generation in China has increased rapidly in the past 20 years from 31.3 million tons in 1980 to 113.0 million tons in 1998. The annual rate of increase is 3-10%. The average generation per capita is 1.0 kg/day (0.38 t/year). Nearly one-half of the waste generated is dumped in the suburbs, where the accumulated quantity has reached 6 billion tons, which has caused heavy environmental pollution. This paper provides information on MSW management in China, such as MSW generation and its physical, chemical, and biological properties. Low calorific value and high moisture content characterize China's municipal waste. Other issues related to MSW management in China are also discussed, including the factors that influence MSW generation quantity and     

运河(杭州段)底泥污染物含量分布调查

底泥疏浚是改善运河 (杭州段 )水质的有效措施 ,为了安全、合理、经济地处置疏浚产生的数百万立方米底泥 ,调查和研究底泥中污染物含量及其分布特征尤为重要。1　调查方法1 .1　钻孔断面与孔位的布设根据运河河床形态、水文条件、排污口及支流影响等 ,在运河杭州段布设 1 2个断面 ,每一断面平均控制 2 .7km河段。每一断面设左、中、右三个孔位 ,共 36个钻孔 ,详见图 1。1 .2　钻探取样方法使用 XY- 1型钻机 ,1 0 8mm采样管获得连续柱状样 ,样柱完整地保持原始状态 ,并保存在剖分后合拢的 PVC管中 ,孔深不小于 2 m,如未穿透污染淤泥层 ,则…     

嘉兴南湖水系水污染特征分析及治理策略

对过水性湖泊南湖及其水系7条主干河道水质进行调查研究,结合该水系2012—2015年相关历史数据,阐述南湖水系水污染特征并提出相应的治理策略。结果表明,根据《地表水环境质量标准》(GB 3838—2002),南湖属于Ⅴ类水,7条主干河道中有4条为Ⅳ类水,2条为Ⅴ类水,1条为劣Ⅴ类水,其中TP和高锰酸盐指数分别是影响南湖和河道水质的关键性指标。南湖水系水质自2012年以来持续改善,氨氮和TP浓度总体呈下降趋势,且入湖河道主要污染物指标变化趋势与南湖基本一致。城乡生活污水、畜禽养殖废水、农田径流是造成南湖水系水污染的主要原因,建议采用控源截污、生态修复等治理措施实现南湖水系改善和生态系统健康发展。     

四平市二龙湖底泥磷释放研究

采用室内实验模拟法对四平市二龙湖富营养化限制因子磷的底泥释放速率及释放量进行了研究,并研究在种环境因子(温度、pH、DO和扰动因素)影响下底泥磷的释放规律。结果表明,(1)二龙湖年平均底泥释磷量为208·78g,最大释磷率为0·889μg/g(T=20℃,pH=8,DO为4·68mg/L);(2)自然和人为的扰动因素会促进底泥的磷释放;(3)H在弱酸至中性范围内底泥释磷量最小,酸性和碱性条件都有利于磷的释放;(4)随着温度的升高底泥释磷量增大;(5)厌条件比好氧条件更有利于磷的释放。     

污水低氧脱氮机制及其应用研究进展

阐述了污水低氧脱氮的基本原理,即抑制或去除亚硝酸盐氧化菌(NOB),同时保留氨氧化菌(AOB),并保持其活性;探讨了污水低氧脱氮实现途径;详细介绍了几种典型的污水低氧脱氮工艺(短程硝化(SHARON)工艺、厌氧氨氧化(ANAMMOX)工艺、好氧反氨化(DEMON)工艺、低氧自养硝化反硝化(OLAND)工艺、甲烷营养型硝化反硝化工艺和亚硝酸盐型完全自养脱氮(CANNON)工艺)的应用研究进展;最后对污水低氧脱氮处理工艺的工程运用进行了展望.     

负载型纳米TiO2光催化降解水中微量溶解性间二甲苯

以高压汞灯为光源 ,采用浸涂 -烧结法制备的负载型纳米TiO2 作为光催化剂 ,通过对水中微量溶解性间二甲苯的光催化氧化过程的研究表明 ,初始浓度在 6 .6 8— 17.36mg/L的范围内 ,间二甲苯的光催化反应遵循表观一级反应动力学规律 ,反应的表观速率常数随溶液初始浓度的增大而减小 ,半衰期则随初始浓度的增大而增加 ,经 1.5h反应后 ,溶液中间二甲苯的去除率从 17.36mg/L的 5 4 .4 4 %增加到 6 .6 8mg/L的 75 .90 %。     

SBR降解动力学研究

采用SBR工艺处理有机废水,在已有工艺条件下对生物降解动力学进行了研究,得出生物降解反应为一级反应。研究表明,用Monod公式能较好反映出有机物的降解规律,确定了其动力学参数V_max=14.6306 d^-1,K_s=83.2993 mg/L,得出SBR降解动力学模型为V=14.6306X·S/(83.2993+S)。利用以动力学为基础的动态模拟法优化SBR工艺,实验结果表明该方法合理可行,对SBR的设计与运行有一定的指导作用,可作为SBR反应器扩大实验和设计的依据。     

负载壳聚糖膨润土的制备及其吸附性能的影响

以天然膨润土和壳聚糖为原料,制得一种新型水处理剂——负载壳聚糖膨润土,研究了制备条件对酸性大红印染废水处理效果的影响。实验表明,当壳聚糖的浓度为30 g/L、膨润土质量与壳聚糖溶液体积之比为0.7、浸泡时间80 min、微烘时间15 min时,壳聚糖改性膨润土对酸性大红印染废水的脱色率可达97%。对改性土进行比表面积测定、电镜扫描及X-射线衍射等结构特性分析,证明壳聚糖的引入改变了膨润土在水中的分散状态,增强了其对污染物的吸附和离子交换能力。