Impacts of a participatory approach to developing national level sustainable development indicators in Finland

The paper explores the role of a participatory approach in the outcome of the Finnish sustainable development indicator (SDI) exercise in 1998-2002. The process is analysed through three main objectives: to achieve stronger democracy, better quality of the end product and a more effective process. The analysis is further structured by a set of criteria needed for successful participation and differentiation of types of participants. The criteria comprise three main aspects: fairness, competence and social learning. In addition to the normally mentioned stakeholders (e.g. citizens and interest groups) participants also include experts and civil servants. Using the set of criteria above the participatory approach of the Finnish SDI process is then evaluated, and in the light of this evaluation the paper also discusses the specifications needed as evaluation criteria for national level policy programme processes like developing the SDIs. The results are based on documentation of the indicator task force meetings, written comments and a study of the putative end-users conducted after the publication of the indicators. The results show that the intense and broad participation of experts and civil servants increased the competence of the outcome and led to greater efficiency in working methods. However, this led to technocratic participation, absence of democratic participation and absence of social learning. Thus the ultimate goal of SDIs to contribute to achieving sustainability was not reached.     

Estimates of black carbon and size-resolved particle number emission factors from residential wood burning based on ambient monitoring and model simulations

In this paper we derive typical emission factors for coarse particulate matter (PM(10)), oxides of nitrogen (NO(x)), black carbon (BC), and number particle size distributions based on a combination of measurements and air quality dispersion modeling. The advantage of this approach is that the emission factors represent integrated emissions from several vehicle types and different types of wood stoves. Normally it is very difficult to estimate the total emissions in cities on the basis of laboratory measurements on single vehicles or stoves because of the large variability in conditions. The measurements were made in Temuco, Chile, between April 18 and June 15, 2005 at two sites. The first one was located in a residential area relatively far from major roads. The second site was located in a busy street in downtown Temuco where wood consumption is low. The measurements support the assumption that the monitoring sites represent the impact of different emission sources, namely traffic and residential wood combustion (RWC). Fitting model results to the available measurements, emission factors were obtained for PM(10) (RWC = 2160 +/- 100 mg/kg; traffic = 610 +/- 51 mg/veh-km), NO(x) (RWC = 800 +/- 100 mg/kg; traffic = 4400 +/- 100 mg/veh-km), BC (RWC = 74 +/- 6 mg/kg; traffic = 60 +/- 3 mg/veh-km) and particle number (N) with size distribution between 25 and 600 nm (N(25-600)) (RWC = 8.9 +/- 1 x 10(14) pt/kg; traffic = 6.7 +/- 0.5 x 10(14) pt/veh-km). The obtained emission factors are comparable to results reported in the literature. The size distribution of the N emission factors for traffic was shown to be different than for RWC. The main difference is that although traffic emissions show a bimodal size distribution with a main mode below 30 nm and a secondary one around 100 nm, RWC emissions show the main mode slightly below 100 nm and a smaller nucleation mode below 50 nm.     

国内外体内X射线荧光骨铅检测系统比较研究

血铅生物半衰期较短,只能反应人体短近铅中毒状况,存在一定局限性;骨铅生物半衰期较长,能够反应人体铅负荷的累积效应,有必要进行检测。体内X射线荧光骨铅检测系统从发明至今已有30多年的历史,文章根据激发源的不同将其分为三类系统进行分析讨论,作为国内开展相关研究工作的借鉴。     

产纤维素酶嗜热地芽孢杆菌HTA426的筛选鉴定、酶学性质分析及其应用

为解决现今纤维素酶生产的低效率和高成本问题,以及实现利用木质纤维素废弃物生产纤维素酶的目的,本研究结合羧甲基纤维素钠(CMC)水解圈法和胞外酶活测定法,从嗜热菌资源丰富的温泉区土壤中筛选出一株具有产羧甲基纤维素酶(CMCase)的嗜热地芽孢杆菌HTA426(Geobacillus kaustophilus HTA426).对菌株生产的酶进行酶学性质分析并将菌株应用于以木质纤维素为替代碳源产纤维素酶.采用硫酸铵沉淀法和离子交换层析法对粗酶液进行二级纯化,回收率和纯化倍数分别为10.14%和5.12,纯化后的CMCase的分子量约为40 k Da.其CMCase活性在温度为60℃,pH为7.0下达到最高.培育5 h后,酶的活性在温度为50~70℃下也能保持相对稳定.HAT426菌株能够在已经经过碱处理的甘蔗渣、稻杆及水葫芦为碳源的培养液中生长和生产CMCase.以甘蔗渣为碳源的培养液最适合于生产CMCase,其活性为103.67U·m L~(-1).菌株HTA426是首次报道的具有产纤维素酶能力的嗜热地芽孢杆菌,经纯化的纤维素酶具有广泛的pH适用性(pH 5~8)和良好的热稳定性(50~70℃),在运用于木质纤维素能源化中具有较大潜力.     

Stochastic modeling of diffuse pesticide losses from a small agricultural catchment

The objective of this study was to identify the main sources of variation in pesticide losses at field and catchment scales using the dual permeability model MACRO. Stochastic simulations of the leaching of the herbicide MCPA (4-chloro-2-methylphenoxyacetic acid) were compared with seven years of measured concentrations in a stream draining a small agricultural catchment and one year of measured concentrations at the outlet of a field located within the catchment. MACRO was parameterized from measured probability distributions accounting for spatial variability of soil properties and local pedotransfer functions derived from information gathered in field- and catchment-scale soil surveys. At the field scale, a single deterministic simulation using the means of the input distributions was also performed. The deterministic run failed to reproduce the summer outflows when most leaching occurred, and greatly underestimated pesticide leaching. In contrast, the stochastic simulations successfully predicted the hydrologic response of the field and catchment and there was a good resemblance between the simulations and measured MCPA concentrations at the field outlet. At the catchment scale, the stochastic approach underestimated the concentrations of MCPA in the stream, probably mostly due to point sources, but perhaps also because the distributions used for the input variables did not accurately reflect conditions in the catchment. Sensitivity analyses showed that the most important factors affecting MACRO modeled diffuse MCPA losses from this catchment were soil properties controlling macropore flow, precipitation following application, and organic carbon content.     

臭氧氧化法处理印染废水

本实验通过印染废水处理装置的建立,研究了臭氧处理印染废水的消耗量与废水ＣＯＤ值变化、废水色度去除率的关系,,以及不同ｐＨ值的印染废水和臭氧处理时间的关系。实验结果表明：经过处理后废水的ＣＯＤ却除率为３３９％,色度去除率为９９９％。     

Leaching and crop uptake of nitrogen from nitrogen-15-labeled green manures and ammonium nitrate

Green manures can be used as an N source for agricultural crops as a substitute for inorganic N fertilizers. The effects of using green manures on leaching and uptake of N by spring barley (Hordeum vulgare L.) were evaluated in a 2-yr lysimeter study. Ryegrass (Lolium perenne L.) and red clover (Trifolium pratense L.) labeled with (15)N were applied in May of the first year at 160 kg total N ha(-1). Simultaneously, (15)NH(4)(15)NO(3) was applied at 80 kg N ha(-1) to additional lysimeters and others were left without N additions (control). During the second year, all lysimeters, except the control, received 80 kg N ha(-1) as unlabeled NH(4)NO(3). The cumulative, average loads of total N leached during the two years were: 37 (control), 62 (NH(4)NO(3)), 50 (ryegrass manure), and 73 (red clover manure) kg ha(-1). The differences among the treatments were not significant (P > 0.05), but the control had significantly smaller (P < 0.05) leaching loads than the treatments. About 24% of ryegrass- and red clover-derived N and 43% of NH(4)NO(3) were removed through spring barley grain and stover during the two growing seasons. Thus, the N use efficiency in barley was substantially larger when grown with inorganic N fertilizer than when grown with green manure. Viewed in combination with the tendency for larger N leaching loads under red clover manure, claims about water quality benefits of legume-based green manures should be evaluated with regard to the timing of N release and demand for N by the plant.     

Comparison of triticonazole dissipation after seed or soil treatment

This study examined the long-term fate of the fungicide triticonazole (TTZ; 5-[(4-chlorophenyl)methylene]-2,2-dimethyl-1-(1H-1,2,4-triazol-1-ylmethyl)cydopentanol) applied at a normal field dose (8.9 g ha(-1)) via seed treatment, which is the normal alternative in practice. The TTZ was applied to wheat (Triticum aestivum L.) grains as a disinfectant before sowing or spraying on bare soil for comparison and reference to the seed treatment. The seeds were germinated and grown in pots in a greenhouse at 22 +/- 3 degrees C. The dissipation of TTZ was studied by gas chromatography-mass spectrometry (GC-MS) analysis of the residues every fourth week until no TTZ could be detected. The recovery for analysis of TTZ in soil was between 98 and 131%, and the quantification level was 0.002 mg kg(-1). After 56 d of incubation, 20 and 28% of the TTZ applied remained in the soil and seed treatments, respectively, with corresponding half-lives of 27 and 29 d. The microbial biomass initially decreased in the soil treatment but had recovered after 56 d. The active part of the biomass was not changed during the experimental time. Thus, with respect to dissipation of TTZ and its effect on the soil microbial biomass and activity, no long-lasting difference between soil and seed treatments could be found.     

Comparison study of five analytical methods for the fractionation and subsequent determination of aluminium in natural water samples

Five methods for aluminium fractionation used in different laboratories in Norway and Finland were compared using six control, 75 soil water and 10 lake water samples. Different fractionation principles [cation exchange, formation of the Pyrocatechol Violet (PCV) or quinolin-8-ol (oxine) complex], types of cation exchanger [Amberlite (Na/H) or Bond Elut (H)], reaction time (from 2.3 s), flow systems (flow injection analysis or segmented flow) and determination principles (molecular absorption spectrometry or ICP-AES) were tested. Determination of the 'labile' fraction was strongly dependent on the method used and the largest differences were observed between the ICP-AES method with cation exchange (Bond Elut H form) and the 'quickly reacting' method (oxine, 2.3 s). Different flow systems, both using cation exchange and determination of the PCV complex but with different reaction times and an extra acidification step, resulted in large differences in the 'reactive' and 'non-labile' fractions determined. However, the determination of the labile fraction gave similar results with both these methods. The two different types of cation exchanger used (with and without pH buffering and with different counter ions) in the ICP-AES methods resulted in differences, mainly because of a smaller 'non-labile' fraction in the non-buffered system. The two flow injection systems (oxine and PCV complexation) showed common trends, which may be connected with the short reaction times used. Comparison with theoretical equilibrium calculations using the model ALCHEMI suggested that the best correlation for the determination of the 'labile' fraction were obtained with the ICP-AES method with an Amberlite column.