Spatial and temporal variations of PM(2.5) concentration and composition throughout an urban area with high freeway density-the Greater Cincinnati study

The PM(2.5) concentration and its elemental composition were measured in the Cincinnati metropolitan area, which is characterized by intense highway traffic. The spatial and temporal variations were investigated for various chemical elements that contributed to the PM(2.5) fraction during a 1-year-long measurement campaign (December 2001-November 2002). The ambient aerosol monitoring was performed in 11 locations around the city during nine measurement cycles. During each cycle, four Harvard-type impactors were operating in parallel in specific locations to explore various factors affecting the PM(2.5) elemental concentrations. The sampling was performed during business days, thus assuring traffic uniformity. The 24-h PM(2.5) samples were collected on Teflon and quartz filters. Teflon filters were analyzed by X-ray fluorescence (XRF) analysis while quartz filters were analyzed by thermal-optical transmittance (TOT) analysis. In addition to PM(2.5) measurements, particle size-selective sampling was performed in two cycles using micro-orifice uniform deposit impactor; the collected fractionated deposits were analyzed by XRF. It was found that PM(2.5) concentration ranged from 6.70 to 48.3 mug m(-3) and had low spatial variation (median coefficient of variation, CV=11.3%). The elemental concentrations demonstrated high spatial variation, with the median CV ranged from 38.2% for Fe to 68.7% for Ni. For traffic-related trace metals, the highest concentration was detected in the city center site, which was close to a major highway. The particle size selective measurement revealed that mass concentration of the trace metals, such as Zn, Pb, Ni, as well as that of sulfur reach their peak values in the particle size range of 0.32-1.0 mum. Meteorological parameters and traffic intensity were not found to have a significant influence on the PM(2.5) elemental concentrations.     

Characterisation of odorants emissions from landfills by SPME and GC/MS

Odorous compounds from a landfill have been characterised by gas-chromatography-mass-spectrometry, identifying about 100 volatile organic compounds. Air samples from different landfill sites and from the environment have been analysed after a solid-phase microextraction on a three-phase fiber, DVB/Carboxen/PDMS, which allowed a preconcentration and the chromatographic data obtained from the most significant emission sources have been submitted to chemometric analysis in order to better establish specific markers of olfactory pollution. For example limonene was a typical tracer of fresh wastes, while p-cymene was characteristic of leachate and biogas. By the developed analytical procedure it has been evaluated the efficiency of a scrubber plant utilised in the landfill in order to remove malodour compounds. The average removal efficiency was not very high (about 23.5%) due to scarce ability in removing low polarity compounds. Furthermore, it has been demonstrated the suitability of a microgas chromatograph for the continuous on-site monitoring of air pollution in order to rapidly individuate emission sources of olfactive nuisances.     

Effects of organic acids on adsorption of lead onto montmorillonite,goethite and humic acid

Adsorption isotherms for Pb onto six soil components (quartz, feldspar, kaolinite, montmorillonite, goethite and humic acid) were studied. The influence of pH, EDTA and citric acid on the adsorption of Pb onto montmorillonite, goethite and humic acid were considered. Results indicate that the experimental data fit the Langmuir Adsorption Isotherm. The adsorption capacity for Pb at pH 6 was found to be in the order: humic acid (22.7 mg g(-1)) > goethite (11.04 mg g(-1)) > montmorillonite (10.4 mg g(-1)) > kaolinite (0.91 mg g(-1)) > feldspar (0.503 mg g(-1)) > quartz (0.148 mg g(-1)). Generally, the amount of Pb adsorbed onto montmorillonite, goethite and humic acid decreased with increasing concentrations of EDTA and citric acid and with increases in alkality. However, there were two exceptions: (1) addition of citric acid increased the amount of Pb adsorbed onto humic acid; and (2) the amount of Pb adsorbed onto goethite decreased with increasing pH in the presence of EDTA. Some mechanisms involved in the adsorption reactions are discussed.     

Effects of surfactant and temperature on biotransformation kinetics of anthracene and pyrene

The biotransformation and mineralization of a mixture of two polycyclic aromatic hydrocarbons (PAHs), anthracene and pyrene, which are known contaminants of soil and groundwater, by an enrichment culture in the presence or absence of 100 mg l(-1) Tergitol NP-10, a non-ionic surfactant, and at temperatures of 10 degrees C and 25 degrees C were investigated. The overall biotransformation of 2 mg l(-1) total PAHs with free cell suspensions in batch culture was greater than 97.2% at both examined temperatures. At 25 degrees C, the overall mineralization of anthracene was 48.8% and that of pyrene was 66.1%. However, the decrease of temperature to 10 degrees C had a negative effect on the mineralization of PAHs and reduced it to 18.5% and 61.5% for anthracene and pyrene, respectively. Using a higher PAHs concentration of 20 mg l(-1) at 25 degrees C, the overall biotransformation of anthracene was 80.7% and that of pyrene was 100%, where only 17.3% anthracene and 7.6% pyrene were mineralized to carbon dioxide and water. The addition of surfactant at 25 degrees C increased the overall mineralization of anthracene and pyrene to 33.0% and 27.6%, respectively. However, the addition of surfactant at 10 degrees C had a negative impact on the overall biotransformation of anthracene and pyrene, reducing them to 20.6% and 14.0%, respectively. These results have significant implications in the bioremediation of PAHs-contaminated sites.     

Alternative herbicides to manage Italian ryegrass (Lolium multiflorum lam) resistant to glyphosate at different phenological stages

During the growing season of 2002--2003, field and greenhouse experiments were conducted with the objective of evaluating the influence of Italian ryegrass phenological stages and management alternatives on the control of resistant biotypes to glyphosate. Three field experiments were conducted in Lagoa Vermelha, RS, Brazil and glyphosate was applied alone and in combinations with alternative herbicides. Two greenhouse experiments were also conducted at the Department of Crop Science, ESALQ/USP, Piracicaba, SP, Brazil. The Italian ryegrass resistant population was collected from Lagoa Vermelha, RS, Brazil. From the results it was possible to conclude that: (i) the more advanced the phenological stage of application, the more difficult the control of resistant Italian ryegrass by glyphosate, mainly by the rate of 960 g a.i. ha(-1); however, this rate applied at earlier phenological stage (five tillers), the control was higher than 90%; (ii) with the increment of glyphosate rate, it significant response was observed on the control at all stages of application; (iii) the mixture of glyphosate + clethodim (1440 + 72 g a.i. ha(-1)), paraquat + diuron (500 + 250 g a.i. ha(-1)), at all stages of application and clethodim (96 g a.i. ha(-1)) and paraquat + diuron (300 + 150 g a.i. ha(-1)) at the initial stages until pre-flowering were excellent alternatives for management of these populations; and (iv) the response of control was much faster for the mixture of glyphosate + clethodim, independently of growth stage.     

Analysis of Ah receptor pathway activation by brominated flame retardants

Brominated flame-retardants (BFRs) are used as additives in plastics to decrease the rate of combustion of these materials, leading to greater consumer safety. As the use of plastics has increased, the production and use of flame-retardants has also grown. Many BFRs are persistent and have been detected in environmental samples, raising concerns about the biological/toxicological risk associated with their use. Most BFRs appear to be non-toxic, however there is still some concern that these compounds, or possible contaminants in BFRs mixtures could interact with cellular receptors. In this study we have examined the interaction of decabromodiphenyl ether, Firemaster BP4A (tetrabromobisphenol A), Firemaster PHT4 (tetrabromophthalic anhydride), hexabromobenzene, pentabromotoluene, decabromobiphenyl, Firemaster BP-6 (2,2^′,4,4^′,5,5^′-hexabromobiphenyl) and possible contaminants of BFR mixtures with the Ah receptor. Receptor binding and activation was examined using the Gel Retardation Assay and increased expression of dioxin responsive genes was detected using the reporter gene based CALUX assay. The results demonstrate the ability of BFRs to activate the AhR signal transduction pathway at moderate to high concentrations as assessed using both assays. AhR-dependent activation by BFRs may be due in part to contaminants present in commercial/technical mixtures. This was suggested by our comparative analysis of Firemaster BP-6 versus its primary component 2,2^′,4,4^′,5,5^′-hexabromobiphenyl. Some technical mixtures of brominated flame-retardants contain brominated biphenyls, dioxins or dibenzofurans as contaminants. When tested in the CALUX assay these compounds were found to be equivalent to, or more active than their chlorinated analogues. Relative effective potency values were determined from dose response curves for these brominated HAHs.     

Genetic effects of air pollution on forest tree species of the Carpathian Mountains

The effects of air pollution on the genetic structure of Norway spruce, European silver fir and European beech were studied at four polluted sites in Slovakia, Romania and Czech Republic. In order to reduce potential effects of site heterogeneity on the health condition, pair-wise sampling of pollution-tolerant and sensitive trees was applied. Genotypes of sampled trees were determined at 21 isozyme gene loci of spruce, 18 loci of fir and 15 loci of beech. In comparison with Norway spruce, fewer genetic differences were revealed in beech and almost no differentiation between pollution-tolerant and sensitive trees was observed in fir. In adult stands of Norway spruce, sensitive trees exhibited higher genetic multiplicity and diversity. The decline of pollution-sensitive trees may result thus in a gradual genetic depletion of pollution-exposed populations of Norway spruce through the loss of less frequent alleles with potential adaptive significance to altered stressing regimes in the future. Comparison of the subsets of sensitive and tolerant Norway spruce individuals as determined by presence or absence of discolorations ("spruce yellowing") revealed different heterozygosity at 3 out of 11 polymorphic loci.     

Electrokinetic remediation of a Cu contaminated red soil by conditioning catholyte pH with different enhancing chemical reagents

The effect of enhancement reagents on the efficiency of electrokinetic remediation of Cu contaminated red soil is evaluated. The enhancement agents were a mix of organic acids, including lactic acid+NaOH, HAc-NaAc and HAc-NaAc+EDTA. The soil was prepared to an initial Cu concentration of 438 mgkg(-1) by incubating the soil with CuSO4 solution in a flooded condition for 1 month. Sequential extraction showed that Cu was partitioned in the soil as follows: 195 mgkg(-1) as water soluble and exchangeable, 71 mgkg(-1) as carbonate bound and 105 mgkg(-1) as Fe and Mn oxides. The results indicate that neutralizing the catholyte pH maintains a lower soil pH compared to that without electrokinetic treatment. The electric currents varied depending upon the conditioning solutions and increased with an increasing applied voltage potential. The electroosmotic flow rate changed significantly when different conditioning enhancing reagents were used. It was observed that lactic acid+NaOH treatments resulted in higher soil electric conductivities than HAc-NaAc and HAc-NaAc+EDTA treatments. Ultimately, enhancement by lactic acid+NaOH resulted in highest removal efficiency (81% Cu removal) from the red soil. The presence of EDTA did not enhance Cu removal efficiencies from the red soil, because EDTA complexed with Cu to form negatively charge complexes, which slowly migrated toward the anode chamber retarding Cu2+ transport towards the cathode.     

Comparison of the method of diffusive gels in thin films with conventional extraction techniques for evaluating zinc accumulation in plants and isopods

The measurement of diffusive gels in thin films (DGT) has recently been developed to assess metal bioavailability in soils. The DGT-method is based on diffusion in a porous matrix. To test the predictive capabilities of the method with regard to metal bioavailability, a study was set up with 28 soils having a variety of textures and amounts of zinc salts added. Correlation and regression analyses were performed to compare DGT-extracted zinc levels to zinc concentrations obtained by extraction with 0.01 M CaCl(2) and 0.43 M HNO(3), digestion with aqua regia and the zinc concentration in pore water. The amount of zinc extracted with CaCl(2) correlated well with DGT-extracted zinc levels in all soils spiked with different amounts of ZnCl(2). A similar correlation was not found for zinc concentrations in soil samples collected in the field. Experiments were performed to compare zinc content in organisms and in soils. The organisms tested were plants (grass, lettuce and lupine) and the hard bodied soil dwelling isopod Oniscus asellus. Good correlations were found between zinc accumulation in grass and lettuce and the C(E) (effective concentration) measured by a DGT-device, CaCl(2) extracted zinc and the zinc content in the pore water of all soils. The correlation with C(E) was not significant for lupine, neither for spiked soils, nor for field soils (p< or =0.001). Zinc levels in the isopods were not significantly related to any set of zinc measurements. From a synthesis of all results obtained it is concluded that the DGT-methodology does not have an additional value in predicting bioavailability of zinc in terrestrial ecosystems as compared to conventional extraction methods.