专家系统在废水生物处理操作和控制中的应用

本文介绍了国外近二十年来专家系统在废水生物处理工艺控制领域的应用及开发的典型系统,分析了废水生物处理工艺难于控制的原因、各类系统的结构和特点及目前废水处理专家系统的不足,探讨了废水生物处理专家系统今后应深入研究的问题及方向     

Modeling porosity reductions caused by mineral fouling in continuous-wall permeable reactive barriers

A study was conducted to assess key factors to include when modeling porosity reductions caused by mineral fouling in permeable reactive barriers (PRBs) containing granular zero valent iron. The public domain codes MODFLOW and RT3D were used and a geochemical algorithm was developed for RT3D to simulate geochemical reactions occurring in PRBs. Results of simulations conducted with the model show that the largest porosity reductions occur between the entrance and mid-plane of the PRB as a result of precipitation of carbonate minerals and that smaller porosity reductions occur between the mid-plane and exit face due to precipitation of ferrous hydroxide. These findings are consistent with field and laboratory observations, as well as modeling predictions made by others. Parametric studies were conducted to identify the most important variables to include in a model evaluating porosity reduction. These studies showed that three minerals (CaCO3, FeCO3, and Fe(OH)2 (am)) account for more than 99% of the porosity reductions that were predicted. The porosity reduction is sensitive to influent concentrations of HCO3-, Ca2+, CO3(2-), and dissolved oxygen, the anaerobic iron corrosion rate, and the rates of CaCO3 and FeCO3 formation. The predictions also show that porosity reductions in PRBs can be spatially variable and mineral forming ions penetrate deeper into the PRB as a result of flow heterogeneities, which reflects the balance between the rate of mass transport and geochemical reaction rates. Level of aquifer heterogeneity and the contrast in hydraulic conductivity between the aquifer and PRB are the most important hydraulic variables affecting porosity reduction. Spatial continuity of aquifer hydraulic conductivity is less significant.     

3株反硝化聚磷菌的分离与鉴定

通过烛缸法培养富集、分离,结合除磷试验、硝酸盐还原产气试验及异染颗粒和PHB颗粒染色辅助检验相结合的方法筛选,得到3株具有较高脱氮除磷效率的反硝化聚磷菌DNPA8, DNPA9和DNPA10。在富氮富磷培养基中培养48 h,各菌株的脱氮率均大于75%,除磷率均大于78%。采用多相分类的方法确定了3株反硝化聚磷菌的分类地位,DNPA8为嗜麦芽寡养单胞菌,DNPA9为水生丛毛单胞菌属首次发现的反硝化聚磷菌;DNPA10为约翰逊氏不动杆菌。该研究结果为富营养化水体的治理提供了有效的菌种资源。     

短程硝化—厌氧氨氧化组合工艺在脱氮领域的研究进展

基于全程硝化反硝化的传统生物脱氮工艺在硝化过程中需要大量氧气供应,反硝化过程需要有机物作为碳源,存在能耗与药耗过大的问题.为了降低废水脱氮的成本,短程硝化(PN)—厌氧氨氧化(ANAMMOX)组合工艺(PNA工艺)得到了高速发展.综述了PNA工艺的影响因素,重点介绍了4种基于PN与ANAMMOX原理开发的衍生PNA工艺...     

化学溶胀法分离废弃线路板中金属与基板

废弃线路板的粉碎和所含金属组分的高效解离是后续分选回收的前提条件。本研究分别使用乙二胺等10种溶剂浸泡废弃线路板,比较对线路板中铜箔与基板间剥离强度的影响,从而筛选出4种有代表性的溶剂,即溶剂D、溶剂F、丙酮和水, 比较废弃线路板经化学溶胀后的单体解离度和获得一定粒径分布的颗粒所需的破碎时间。研究结果表明,化学溶胀后破碎能大幅提高金属的单体解离度,浸泡效果的优良排序为：溶剂D>溶剂F>丙酮>水;浸泡时间越长,浸泡温度越高,对剥离强度的降低越有利;使用溶剂D在150℃、3 h或140℃、5 h的工艺下浸泡废弃线路板,可以使铜箔与基板自动脱落。研究结果为后续的分选提供了便利的条件。     

PM10-PM2.5冲击采样器的研制与开发

在颗粒物研究中,分级采样是一种常用的监测方法,而冲击采样器是颗粒物分级采样的重要仪器.根据斯托克斯数,对PM10-PM2.5冲击采样器设计参数进行了详细分析,并对PM10-PM2.5的捕集效率特征进行了分析.结果表明,PM10-PM2.5冲击采样器具备理想的PM10和PM2.5捕集效率,PM10冲击采样器、PM2.5冲击采样器切割粒径分别为9.94、2.43μm,均在其允许误差范围内.     

DO在厌氧序批式生物膜反应器中对厌氧氨氧化反应启动的影响

考察了DO在厌氧序批式生物膜反应器(ASBBR)中对厌氧氨氧化反应启动过程的影响.结果表明,当进水采用高纯氮气进行除DO处理后进入ASBBR时,ASBBR很快以厌氧氨氧化反应为主,运行13 d后,NO-3-N生成量、NO-2-N去除量、NH+4-N去除量比开始围绕0.25∶1.30∶1.00上下小幅波动,运行100 d后的总氮容积去除负荷为1.560 kg/(m3·d);当进水不除DO处理进入ASBBR时,从运行的第57天开始,ASBBR内才表现出明显的厌氧氨氧化反应特性,运行到第73天时,NO-3-N生成量、NO-2-N去除量、NH+4-N去除量比开始围绕0.21∶1.20∶1.00上下小幅波动,运行的93～100 d,总氮容积去除负荷稳定在较高水平,最高可达1.090 kg/(m3·d);进水不除DO处理时,会使厌氧氨氧化反应启动迟缓;无纺布作为生物载体,具有较强的抗水力负荷和基质(NH+4-N、NO-2-N)负荷能力.     

Ammonia emission from grassland and livestock production systems in the UK

Emissions of ammonia were measured from livestock excreta and fertilisers applied to grass swards, from grazed paddocks, from decomposing grass herbage and from an animal house containing dairy cows. Emissions from urine, dung, slurry and fertilisers were determined using a system of wind tunnels with each tunnel covering an area of 1 m(2). Emissions from grazed swards were determined using a micrometeorological mass balance method. From the results of these measurements, together with other published information, an inventory for ammonia emissions has been calculated for grassland and livestock production systems over the UK as a whole. It is estimated that emissions from grassland and cattle and sheep production amount to about 230 kt NH(3)-N annually, while emissions from pig and poultry production amount to about 40 kt and 80 kt NH(3)-N, respectively.     

Trace metals in the hair of habitants of the Ok Tedi region, Papua New Guinea

It has long been known that mining activity can markedly change the level and distribution of certain heavy metals in the adjacent environment. This pollution can be quite widespread and long lasting and often has deleterious effects on the health of local populations. In the present study scalp hair was used as the biopsy material because of its ease of collection and long history of use in this connection. Hair was collected from all the local villages in the vicinity of the mine site, as well as from Papua New Guinean nationals from other provinces, and European expatriates who were employed by the mining company and who were resident in the area. Hair from local people showed a remarkably high iron content by comparison with previously studied populations. The extreme variations in hair iron levels were reflected in the differential distribution of levels according to location, age and sex. Hair cadmium was also high in the population studied. Hair copper, lead, zinc and mercury all appeared to be within 'normal' limits by comparison with other general populations. These results are discussed in the context of the environmental and social impact of the mining operations on the local people.     

Distribution of fission products in dust samples from the region of Thessaloniki, Greece, after the Chernobyl nuclear accident

The distribution of the fission products (95)Zr, (95)Nb, (103)Ru, (106)Ru (determined through (106)Rh), (125)Sb, (129m)Te, (134)Cs, (137)Cs, (140)Ba, (140)La, (141)Ce and (144)Ce has been determined in dust samples from the region of Thessaloniki, Greece, after the nuclear accident at Chernobyl. The samples studied also included (110m)Ag, not belonging to the products of (235)U fission. Samples showing higher concentrations of radionuclides also show a higher content in clay minerals, whereas samples having low concentrations of radionuclides usually contain large amounts of quartz and feldspars. Desorption and leaching experiments using solutions of chlorides of sodium, potassium, calcium and magnesium (0.5 N), as well as distilled and tap water, were also performed. Sodium and potassium chloride solutions were found to be efficient in desorbing and/or leaching of caesium and ruthenium isotopes to an extent of about 30%.