Formation of PCDDs and PCDFs during the combustion of polyvinylidene chloride

In laboratory-scale combustion of polyvinylidene chloride (PVDC) with a quartz tubular furnace designed and fabricated to provide the desired combustion temperature and mixing state of combustion gas with air, it was found that at 800 degrees C or higher the level of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans [corrected] (PCDDs/PCDFs) resulting from PVDC combustion was no higher than that from heating air alone, and thus far below the levels which resulted from PVDC combustion at 750 degrees C or lower. The results provide the first laboratory confirmation of the relation between PVDC incineration temperature and PCDD/PCDF formation, and of the primary importance of high temperature, turbulence for mixing between air and combustion gas, and sufficient residence time, as governing factors for the minimization of PCDD/PCDF formation in municipal solid waste incinerators.     

Nitrogen content, 15N natural abundance and biomass of the two pleurocarpous mosses Pleurozium schreberi (Brid.) Mitt. and Scleropodium purum (Hedw.) Limpr. in relation to atmospheric nitrogen deposition

The suitability of the two pleurocarpous mosses Pleurozium schreberi and Scleropodium purum for assessing spatial variation in nitrogen deposition was investigated. Sampling was carried out at eight sites in the western part of Germany with bulk deposition rates ranging between 6.5 and 18.5 kg N ha(-1) yr(-1). In addition to the effect of deposition on the nitrogen content of the two species, its influence on 15N natural abundance (delta15N values) and on productivity was examined. Annual increases of the mosses were used for all analyses. Significant relationships between bulk N deposition and nitrogen content were obtained for both species; delta15N-values reflected the ratio of NH4-N to NO3-N in deposition. A negative effect of nitrogen input on productivity, i.e. decreasing biomass per area with increasing N deposition due to a reduction of stem density, was particularly evident with P. schreberi. Monitoring of N deposition by means of mosses is considered an important supplement to existing monitoring programs. It makes possible an improved spatial resolution, and thus those areas that receive high loads of nitrogen are more easily discernible.     

PM10-bound polycyclic aromatic hydrocarbons (PAHs) in the Greater Area of Athens, Greece

Polycyclic aromatic hydrocarbons (PAHs) associated to ambient PM10 were determined at four sites within the Greater Athens Area (GAA), Greece, during the period May 2001-June 2002. Daily average PM10 samples were collected using reference samplers installed in two urban locations (Maroussi, MAR and Aristotelous, ARI), a mixed urban-industrial location (Elefsina, ELE), and a background location (Thracomacedones, THR). Spatial and temporal variation of ambient PAH levels and possible relationships with conventional air pollutants and meteorological parameters were investigated. Moreover, source identification was attempted using diagnostic ratios. The PAH concentrations observed in this study, even in downtown Athens, were towards the lowest end of the range of values reported for other European urban locations. The mean concentration of the well known carcinogen B[alpha]Py was at all four sites below the proposed value of 1 ng m-3 (annual average assessment threshold). Automobile traffic was identified as the major PAH source in the GAA exhibiting greatest contribution in the urban sites.     

Removal and pre-concentration of phenolic species onto beta-cyclodextrin modified poly(hydroxyethylmethacrylate-ethyleneglycoldimethacrylate) microbeads

Poly(Hydroxyethylmethacrylate-Ethyleneglycoldimethacrylate), poly(HEMA-EGDMA), microbeads with 150-200 microm in size, was prepared by suspension polymerization. Beta-cyclodextrin was modified onto the polymeric microbeads using glutaraldahyde activation in an acidic medium at pH=2.5. FT-IR and TGA were used for the characterization of modified polymers and the determination of the nature of the interaction between phenolic compounds and the modified polymeric microbeads. Plain and beta-cyclodextrin modified microbeads were used in adsorption-desorption studies of phenolic species in single solution. Adsorption capacities of the phenolic species onto the plain microbeads were found to be 28.2, 17.0, 14.3, 9.8, and 1.92 mg/g polymer for o-chloro phenol, p-nitro phenol, p-chloro phenol, o-nitro phenol, and phenol, respectively. However, for beta-cyclodextrin modified microbeads, adsorption capacity of phenolic species was determined as 274, 365, 128, 182, and 87 mg/g for phenol, o-nitro phenol, p-nitro phenol, o-chloro phenol, and p-chloro phenol, respectively. Desorption ratio for the phenolic species was more than 90%, except for o-nitro phenol. Detection limits of the phenolic species were improved at least 500-fold for UV-Vis spectrophotometric detection, after the pre-concentration of all phenolic species used in this study. Adsorption time for the phenolic species onto beta-cyclodextrin-modified poly(HEMA-EGDMA) microbeads was found to be reasonable short (10-60 min) and suitable for the applications. Also, synthesized microbeads were useful for the repeated use for the removal and pre-concentration of phenolic species.     

Sorption of pentachlorophenol on pine bark

The minimization of pentachlorophenol (PCP) transport in the environment driven by industrial wastewater discharges can be accomplished by sorption in natural, available and low cost by-products like pine bark. Taking into account that PCP is a chemical which behaviour is highly dominated by the surrounding features, this work intended to evaluate the sorption kinetics and equilibrium parameters according to the pH and temperature as well as the pine bark particle size. The PCP uptake by pine bark showed to be faster in the initial phase followed by a slower process, being 24 h the suitably time to reach the sorption equilibrium in the range of pH studied. The neutral PCP species showed to have higher binding capacity to pine bark than the anionic PCP, which was reflected in a decrease in the distribution coefficient (Kd) of the linear sorption isotherm with the increase of solution pH from 2 to 7. On the other hand, between 10 degrees C and 35 degrees C, the temperature does not seem to play a significant role in the PCP sorption by pine bark, while the sorbent size is a key parameter to enhance the overall process.     

Systematic development of an artificial neural network model for real-time prediction of ground-level ozone in Edmonton, Alberta, Canada

Ground-level ozone is a secondary pollutant that has recently gained notoriety for its detrimental effects on human and vegetation health. In this paper, a systematic approach is applied to develop artificial neural network (ANN) models for ground-level ozone (O3) prediction in Edmonton, Alberta, Canada, using ambient monitoring data for input. The intent of these models is to provide regulatory agencies with a tool for addressing data gaps in ambient monitoring information and predicting O3 events. The models are used to determine the meteorological conditions and precursors that most affect O3 concentrations. O3 time-series effects and the efficacy of the systematic approach are also assessed. The developed models showed good predictive success, with coefficient of multiple determination values ranging from 0.75 to 0.94 for forecasts up to 2 hr in advance. The inputs most important for O3 prediction were temperature and concentrations of nitric oxide, total hydrocarbons, sulfur dioxide, and nitrogen dioxide.     

Adsorption-oxidation of hydrogen sulfide on activated carbon fibers: effect of the composition and the relative humidity of the gas phase

The removal of hydrogen sulfide by oxidation-adsorption on two type carbon fibers, Actitex FC1201 and RS1301, was studied. Two kinetic steps where identified. During the first step, the degradation appears to be limited by the oxidation reaction. In the second kinetic step, the by-products inhibit the hydrogen sulfide degradation. This leads to a limitation in the carbon site's accessibility and to a lower kinetic. The Langmuir-Hinshelwood model was used to correlate the experimental results and to estimate the kinetic (k) and the Langmuir adsorption (K) constants. For FC1201 fibers, the kinetic constant (k) is five time higher and the adsorption constant is five time lower compared to the RS1301 fibers. The role of the humidity was found to be highly beneficial for the removal of hydrogen sulfide. Especially in the second kinetic step, where it removes the by-product formed and therefore delays the occurrence of this low kinetic step. The kinetic constant (k) is strongly influenced by humidity while the Langmuir adsorption constant (K) seems independent. The effect of the nature of the gas phase on the reaction kinetic was also studied. Under a dry atmosphere, we note that the oxidation-reaction occurs even if the gaseous oxygen is not present. This oxidation is due to the oxygen surface function of the carbon fibers. Moreover, the degradation kinetic is faster under a dry nitrogen atmosphere. The presence of water traces leads to the acidification of the carbon surface, under oxygen or carbon dioxide atmospheres, and hence limits the hydrogen sulfide dissociation. In a humid atmosphere, the oxygen or carbon dioxide leads to a faster reaction kinetic. The acidification of the carbon surface is largely counterbalanced by the dissolution of the by-products.     

Numerical evaluation of the PCBs transport over the Northern Hemisphere

The numerical evaluation of selected PCB congener (28, 118, 153, 180) transport over the Northern Hemisphere is carried out for 1996 using MSCE-POP model. This model is a multicompartment three-dimensional one and includes various environmental media such as the atmosphere, soil, vegetation, seawater, and sea ice. The spatial resolution is 2.5 degrees x2.5 degrees for all media except marine one (1.25 degrees x1.25 degrees ). The main model output information is deposition fluxes, spatial distribution of concentrations in environmental media, pathways and source-receptor relationships. Calculation results are analysed for the whole hemisphere and the Arctic region. In particular, this gives an opportunity to estimate the contributions of individual emission source groups to the Arctic pollution. The reliability of the model assessment is analysed by comparison between calculated and observed data.     

Characterization of the organic matter of sludge: determination of lipids, hydrocarbons and PAHs from road retention/infiltration ponds in France

This paper presents the results of the organic matter characterization of sludge from two ponds (retention and infiltration) located in France. Special focus was placed on studying hydrocarbons and PAHs. This investigation is part of a global project on road and urban sludge with the aim of identifying a better means for managing these materials. Gas chromatographic and GC/MS analyses indicate that the main component of the organic fraction stems from petroleum-derived products like diesel fuel and motor oil. This finding was confirmed by the presence of biomarkers from the hopane series, as well as by pyrolytic and alkylated PAHs. Results from this study clearly show that the contaminants are mainly generated from anthropogenic petroleum sources. Due to their levels of hydrocarbon contamination, these sludge deposits must be considered as waste and cannot therefore be disposed anywhere, especially within the current context of sustainable development.     

The influence of humic acids on the phytoextraction of cadmium from soil

Cadmium poses a major environmental and human health threat because of its constant release through anthropogenic activities. A need, therefore, exists for cost-effective remediation procedures. Phytoremediation, the use of plants to extract contaminants from soils and groundwater, has revealed great potential. However, it is limited by the fact that plants need time, nutrient supply and, moreover, have a limited metal uptake capacity. Synthetic chelators have shown positive effects in enhancing heavy metal extraction through phytoremediation, but they have also revealed a vast number of negative side-effects. The objective of this research was to investigate the use of humic acids as an alternative to synthetic chelators. Humic acids were applied to a cadmium-contaminated soil at various dosages, and the uptake of cadmium into Nicotiana tabacum SR-1 was determined in relation to the amounts of total and bioavailable cadmium in the soil. It was found that the theoretical bioavailability of cadmium, as determined by diethylenetriaminepentaacetic acid (DTPA) extraction, did not change, but its plant uptake was enhanced significantly, in some cases up to 65%. Humic acids added at a rate of 2 g kg(-1) soil increased the cadmium concentration in the shoots from 30.9 to 39.9 mg kg(-1). A possible reason for this enhancement is the decrease in pH, resulting in higher cadmium availability. Another possibility taken into account is that plants may take up cadmium complexes with humic acid fragments, which result from microbiological degradation or, self-dissociation.