Assessment of metal pollution in urban road dusts from selected highways of the Greater Toronto Area in Canada

Over the last several decades, there has been increased attention on the heavy metal contamination associated with highways because of the associated health hazards and risks. Here, the results are reported of an analysis of the content of metals in roadside dust samples of selected major highways in the Greater Toronto Area of Ontario, Canada. The metals analysed are lead (Pb), zinc (Zn), cadmium (Cd), nickel (Ni), chromium (Cr), copper (Cu), manganese (Mn), calcium (Ca), potassium (K), magnesium (Mg) and iron (Fe). In the samples collected, the recorded mean concentrations (in parts per million) are as follows: Cd (0.51), Cu (162), Fe (40,052), Cr (197.9), K (9647.6), Mg (577.4), Ca (102,349), Zn (200.3), Mn (1202.2), Pb (182.8) and Ni (58.8). The mean concentrations for the analysed samples in the study area are almost all higher than the average natural background values for the corresponding metals. The geo-accumulation index of these metals in the roadside dust under study indicates that they are not contaminated with Cr, Mn and Ca; moderately contaminate with Cd and K; strongly contaminated with Fe and Mg; strongly to extremely contaminated with Ni and Pb; and extremely contaminated with Cu and Zn. The pollution load index (PLI) is used to relate pollution to highway conditions, and the results show that PLI values are slightly low at different samples collected from Highways 401 and 404 and high in many samples collected from Highway 400 and the Don Valley Parkway. Highway 400 exhibits the highest PLI values.     

Environmental assessment of trace element bioaccumulation in sipunculan from seagrass and wetland sediments

This study is the first measurement of trace elements in sipunculan and their surrounding sediments. The bioaccumulation characteristics of arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), mercury (Hg), and zinc (Zn) were analyzed and compared in two sipunculan species, Sipuncula nudus and Siphonosoma vastum, which were collected from seagrass beds and wetlands in Taiwan. The sipunculan and sediment samples were analyzed using an inductively coupled plasma mass spectrometer. Both sipunculan in the wetlands and seagrass beds had a high Cu bioaccumulation mechanism. Multivariate analysis, principle component analysis, and partial least squares for discriminant analysis of trace element levels and bioaccumulation factors were used to distinguish the element distributions that corresponded to the two habitats (seagrass beds and wetlands). Different levels of certain trace elements in these two sipunculan species may result not only from the environmental factors of various habitats but also from the accumulation characteristics of various species. The As, Cd, Cr, Cu, Hg, and Zn concentrations were markedly lower in sipunculan than in other invertebrates from the adjacent polluted regions. The public health issues regarding the consumption of sipunculan are also discussed.     

Assessment of heavy metals and their interrelationships with some physicochemical parameters in eco-efficient rivers of Himalayan region

Most precious and world famed Himalayan rivers like Ganga, Yamuna, and their tributaries are originated from Uttarakhand state of India. Over the years, increased industrial activities and urban growth along the rivers and lakes have resulted in increased load over the water bodies. In the present study, a comparison of characteristics of water quality with respect to heavy metals (Fe, Zn, Cu, and Pb) and their interrelationships with some physiological parameters during different seasons of year 2010 has been made in the water bodies flowing through the two geographical regions, namely Garhwal and Kumaon regions of the Himalayan State of India. All observed values of Pb, 02 observation of the Cu, and 59 observations of Fe are found exceed with the WHO standard for drinking water; 83 observations of Pb, 110 observations of Cu, and 59 observations of Fe are found exceed with the Bureau of Indian Standards. However, none of the observation of Zn is found exceeding with the standard limit. Cu shows the highest concentration 7.30 mg/l among all observations and also its higher concentration in Kumaon rivers. All the metals show negative correlation with dissolved oxygen and pH. Fe in river Yamuna system and Zn in Kumaon rivers show significant temporal variations at 90 % level of significance (LOS). However, no significant temporal difference of remaining metals is observed even at 95 % LOS. All metals except Fe in river Yamuna system show very significant variation in spatial distribution in different river systems at 95 % LOS.     

Biosorption of Pb(II) and Cr(III) from aqueous solutions: breakthrough curves and modeling studies

The sorption capacity parameters obtained for batch studies provide useful information about biosorption system. However, such data fail to explain the process under continuous-flow conditions. The present study is an attempt to explore the biosorption of Pb(II) and Cr(III) by straw from local wheat (Triticum aestivum). The biosorbent has been characterized by using Fourier transform infrared spectroscopy and surface area and elemental analyses and found to be porous and polyfunctional. S-shaped breakthrough curves were obtained at different column heights for the both metal ions. Various breakthrough parameters and saturation times have been determined. The column data have been successfully used to study the Bohart–Adams' bed depth service time (BDST) model and Yoon and Nelson's model. It was found that BDST model quite efficiently explained the whole column data whereas Yoon and Nelson model could explain it below 90 % breakthrough concentration. The predicted and calculated BDST parameters were in agreement with each other. Yoon and Nelson's constant decreased with an increase in the column height for both metal ions. Effect of change in flow rate on the Pb(II) biosorption has also been discussed with respect to BDST approach.     

Multivariate analysis of potentially toxic metals in sediments of a tropical coastal lagoon

Surface sediments collected from the Lagos Lagoon, Nigeria, and three adjoining rivers were analysed for their physicochemical properties and pseudo-total concentration of the potentially toxic metals (PTM) Cd, Cr, Cu, Pb and Zn. The concentration of the PTM varied seasonally and spatially. Odo-Iyaalaro was observed to be the most polluted river, with highest concentrations of 42.1 mg kg^?1, 102 mg kg^?1, 185 mg kg^?1, 154 mg kg^?1 and 1040 mg kg^?1 of Cd, Cr, Cu, Pb and Zn, respectively, while Ibeshe River was the least contaminated, apart from a site affected by Cu from the textile industry. Some of the sediments were found to be above the consensus-based probable effect concentrations and Dutch sediment guideline for metals. Overall metal concentrations were similar to those reported for other tropical lagoon and estuarine systems affected by anthropogenic inputs as a result of rapid urbanisation. Due to the large number of samples, principal component analysis was used to examine relationships within the data set. Generally, sediments collected during the dry season were observed to have higher concentration of PTM than those collected during the rainy season. This means that PTM could accumulate over a prolonged period and then be released relatively rapidly, on an annual basis, into tropical lagoon systems.     

Some considerations on the use of simple box models of contaminant fate in soils

A simple box model computing time-averaged concentrations in soil and water of contaminants such as pesticides, following a pulse emission under the assumption of constant removal rates, is presented and evaluated against a benchmark model and some lysimeter experiments representative of different soil and climate settings in Europe. The simple box model allows capturing to some extent the trends of contaminant releases observed from lysimeters or predicted by the benchmark model. This suggests that the correct order of magnitude of environmental concentrations and loads of contaminants can be described as a first approximation by a very simple back-of-the-envelope calculation. In the calculation, the time lag between contaminant application and the start of runoff or leaching should be considered. In the absence of more detailed information, repeating the calculation for the extreme cases of zero and one month lag yields a reasonably realistic range, and the geometric mean of the two is suggested as a first guess estimate. This configures a practical approach for the screening of contaminant losses especially suited for the mapping of predicted environmental concentrations (PECs) for assessment at broad scale (such as continental Europe, a country or a large catchment), where contingent determinants of contaminant fate tend to be averaged out and use of more detailed models usually promises to yield little improvement of PECs.     

Transfer of Graphene CVD to Surface of Low Density Polyethylene (LDPE) and Poly(butylene adipate-co-terephthalate) (PBAT) Films: Effect on Biodegradation Process

Here, the influence of graphene as a coating on the biodegradation process for two different polymers is investigated, poly(butylene adipate-co-terephthalate) (PBAT) (biodegradable) and low-density polyethylene (LDPE) (non-biodegradable). Chemical vapor deposition graphene was transferred to the surface of two types of polymers using the Direct Dry Transfer technique. Polymer films, coated and uncoated with graphene, were buried in a maturated soil for up to 180 days. The films were analyzed before and after exposure to microorganisms in order to obtain information about the integrity of the graphene (Raman Spectroscopy), the biodegradation mechanism of the polymer (molecular weight and loss of weight), and surface changes of the films (atomic force microscopy and contact angle). The results prove that the graphene coating acted as a material to control the biodegradation process the PBAT underwent, while the LDPE covered by graphene only had changes in the surface properties of the film due to the accumulation of solid particles. Polymer films coated with graphene may allow the production of a material that can control the microbiological degradation, opening new possibilities in biodegradable polymer packaging. Regarding the possibility of graphene functionalization, the coating can also be selective for specific microorganisms attached to the surface.     

The search for an alternative to piped water and sewer systems in the Alaskan Arctic

Forty-two communities in rural Alaska are considered unserved or underserved with water and sewer infrastructure. Many challenges exist to provide centralized piped water and sewer infrastructure to the homes, and they are exacerbated by decreasing capital funding. Unserved communities in rural Alaska experience higher rates of disease, supporting the recommendation that sanitation infrastructure should be provided. Organizations are pursuing alternative solutions to conventional piped water and sewer in order to maximize water use and reuse for public health. This paper reviews initiatives led by the State of Alaska, the Alaska Native Tribal Health Consortium, and the Yukon Kuskokwim Health Corporation to identify and develop potential long-term solutions appropriate and acceptable to rural communities. Future developments will likely evolve based on the lessons learned from the initiatives. Recommendations include Alaska-specific research needs, increased end-user participation in the design process, and integrated monitoring, evaluation, and information dissemination in future efforts.     

Carbon and nitrogen mineralization in Vertisol as mediated by type and placement method of residue

Selection of appropriate residue application method is essential for better use of biomass for soil and environmental health improvement. A laboratory incubation experiment was conducted for 75 days to investigate C and N mineralization of residues of soybean (Glycine max L.), chickpea (Cicer arietinum L.), maize (Zea mays L.), and wheat (Triticum aestivum L.) placed on the soil surface and incorporated into the soil. The residue of soybean and chickpea had a greater decomposition rate than that of maize and wheat, despite of their placements. Higher rate of decomposition of the residue of soybean and chickpea was recorded when it was kept on the soil surface while soil incorporation of residue of wheat and maize resulted in faster decomposition. Therefore, these findings could be used as guidelines for management of crop residue application in farmland to improve soil and environmental quality.     

Reservoir water quality: a case from Jordan

Jordan relies heavily on reservoirs building and development to cope with water supply challenges, where monitoring and assessment of reservoir water quality are critically important for the sustainable use of these water supplies. Mujib Dam is an important water supply source in central western Jordan. Evaluation of water quality parameters and their spatial distributions (vertical and horizontal) showed near-neutral pH values with nearly similar values from surface to bottom. The vertical profile of DO and TDS in the dammed reservoir showed slight decreasing trends with increasing depth. Although Ca, Mg, Na, and K concentrations varied slightly with depths, their variations showed no trends. Similarly, the vertical and horizontal distribution patterns of Cl, SO₄, HCO₃, NO₃, and PO₄ in Mujib reservoir water showed insignificant variations in surface water layer and relatively unchanged values or decreasing trends through the water column. Higher values of TN have been observed, especially in the western part, suggesting that agricultural activities and livestock farming in the upstream catchment are impacting water quality. Results revealed that weathering and dissolution of rocks are the major source of water chemistry. The majority of trace metal levels (Cd, Cr, Cu, Fe, Mn, Pb, Zn, Co, Ni, Sr, and B) in water showed relatively similar surface and bottom values. The concentrations of COD and BOD₅ in surface water were relatively low with higher concentrations observed in the northwestern corner, coincided with higher levels of chlorophyll a. The average ratio of TN to TP in surface water suggests that phosphorus is the limiting factor for the algal blooms, whereas the average chlorophyll a level in surface water indicates oligo-mesotrophic water.