Application of remote sensing to exposure monitoring

Although exposure assessments cannot be completed remotely, remote sensing techniques provide an invaluable adjunct in exposure monitoring programs. Exposure can be defined as the summation over time, in all media, of the amount of a pollutant available at the exchange boundaries of the receptor during a specified period. This paper describes a few remote monitoring techniques that provide direct measurement input into an exposure assessment and several that furnish quantitative or qualitative information leading to decisions regarding how to monitor, such that the source-exposure-dose relationships can be fully defined. Two general classes of remote sensing systems are included in this discussion-passive and active. Passive systems depend on a measurement of the energy reflected or emitted by a target and active systems use an energy source, e.g., a laser to perform the environmental interrogation. Airborne as well as ground-based remote monitoring measurements or systems are also considered in this paper.     

Application of multimedia exposure assessment to drinking water

A potentially important exposure route for humans is the ingestion of chemicals via drinking water. If comprehensive exposure assessments are to be completed for either existing or proposed new chemicals and cost effective control strategies developed, then a quantitative understanding of multimedia transport and fate of specific chemical pollutants must be achieved. Mathematical models provide a powerful framework into which quantitative relationships may be placed to provide guidance in reaching water quality goals. Existing, state-of-the-art media-specific toxic organic transport and fate models for atmospheric (DiDOT), land surface (NPS) and surface water processes (EXAMS) and potable water treatment (WTP) have been linked to demonstrate the technical feasibility of such an approach. Limited application and sensitivity testing of this linked modeling system has shown that the impact of various source loadings and control strategies on drinking water quality can be estimated.     

Estimating means and variances: The comparative efficiency of composite and grab samples

This paper compares the efficiencies of two sampling techniques for estimating a population mean and variance. One procedure, called grab sampling, consists of collecting and analyzing one sample per period. The second procedure, called composite sampling, collectsn samples per period which are then pooled and analyzed as a single sample. We review the well known fact that composite sampling provides a superior estimate of the mean. However, it is somewhat surprising that composite sampling does not always generate a more efficient estimate of the variance. For populations with platykurtic distributions, grab sampling gives a more efficient estimate of the variance, whereas composite sampling is better for leptokurtic distributions. These conditions on kurtosis can be related to peakedness and skewness. For example, a necessary condition for composite sampling to provide a more efficient estimate of the variance is that the population density function evaluated at the mean (i.e.f()) be greater than . If , then a grab sample is more efficient. In spite of this result, however, composite sampling does provide a smaller estimate of standard error than does grab sampling in the context of estimating population means.     

Biodegradability: An assessment of commercial polymers according to the Canadian method for anaerobic conditions

The degradation of several biodegradable polymers was measured as a result of exposure to an anaerobic medium. The polymers investigated included materials based upon polylactic acid, polylactone, and poly(hydroxy butyrate/valerate) as well as those incorporating starch-based materials. The degradation was monitored by methane and carbon dioxide evolution. In addition, the physical and chemical changes were noted as a result of exposure. These measurements included changes in mass, dimension, and molecular weight. FTIR, UV-vis, proton, and¹³C NMR spectra were also recorded prior to and after exposure. The results clearly indicated that several biological and chemical degradation processes were occurring with the biodegradable polymers studied.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Issued as NRCC No. 37549.     

Effects of sulfide exposure history and hemolymph thiosulfate on oxygen-consumption rates and regulation in the hydrothermal vent crab Bythograea thermydron

The hydrothermal vent crab Bythograea thermydron is exposed to high environmental concentrations of sulfide and low levels of oxygen for extended periods of time. It has previously been shown that hydrogen sulfide is oxidized to the relatively non-toxic thiosulfate (S₂O ₃ ^2– ), which accumulates in the hemolymph. Hemolymph thiosulfate levels in freshly captured crabs vary significantly among crabs from different hydrothermal vent sites as well as between crabs from different microhabitats within the same site. Hemolymph thiosulfate concentrations were not significantly different between crabs captured at the same site 6 mo apart. Hemolymph thiosulfate concentrations ranged from 66 mol 1^–1 in a crab captured at a site with relatively low sulfide venting, to 3206 mol 1^–1 in an individual that was netted from an active smoker vent with much higher sulfide exposure. The differences in hemolymph thiosulfate between sites and the stability of hemolymph thiosulfate in crabs captured at the same site at different times suggest that sulfide exposure is significantly different between sites and that this exposure may not vary significantly over the course of a few months. B. thermydron experimentally exposed to sulfide had high levels of thiosulfate in their hemolymph and increased abilities to regulate oxygen consumption in conditions of low oxygen. This enhancement of regulatory abilities suggests that the previously demonstrated increased hemocyaninoxygen (Hc–O₂) affinity due to elevated thiosulfate may be adaptive in vivo. Average oxygen-consumption rates were much higher in crabs experimentally exposed to sulfide than in unexposed crabs. Crabs injected with isosmotic thiosulfate did not have increased oxygen-consumption rates as did the sulfide-exposed individuals, but did show a similar reduction in P _c (the critical partial pressure of oxygen at which crabs can no longer regulate oxygen consumption). This suggests that it is the sulfide exposure and/or detoxification rather than the elimination of thiosulfate that causes the increase in metabolic rate. Thiosulfate diffuses into dead crabs and into live crabs exposed to 15 mmol S₂O ₃ ^2- l^–1, indicating substantial permeability, and yet live crabs are able to eliminate thiosulfate when incubated in sea water containing 1.5 mmol S₂O ₃ ^2- l^–1, suggesting a process that has an active component.     

Association between the mollusc bivalve Loripes lucinalis and a Chlamydia-like organism,with comments on its pathogenic impact,life cycle and possible mode of transmission

Loripes lucinalis is a littoral bivalve which has already been confirmed to harbour endo-cellular sulfur-oxidizing bacteria within its gills. Examination of the digestive gland of L. lucinalis collected from the Moulin Blanc Beach in the Bay of Brest (Brittany, France) revealed the existence of an additional association involving a Chlamydia-like organism. Three different forms of Chlamydia-like bacteria were observed: reticulate rod-shaped cells, electron-dense cells and enlarged cells. The reticulate rod-shaped cells and the electron-dense bodies are thought to represent the germinal initial body and infectious form of the bacteria, respectively. The enlarged cells were always associated with what are believed to be spherical or icosahedral phages. Initial infestation seems to occur by phagocytosis at the apical pole of the digestive cells of the tubule and duct epithelia. Within the host cell, the bacteria undergo binary fission and budding, forming an inclusion which gradually fills up the cell. Inclusions are generally between 15 and 30 m in size, and > 85% of all individuals examined possessed inclusion bodies. The level of infestation varied between individuals, some being heavily colonized, but did not seem to be related to season. Histological and ultrastructural observations suggest that, once developed, the colony has three possible fates: (1) the cells will degenerate due to phage infection; (2) colony overcrowding will occur, causing the development of electron-dense bodies that will be released into the lumen; (3) the entire membrane-bound inclusion will be released into the lumen and subsequently into the pallial cavity. Inclusions within the pallial cavity may be ingested by the host or may even be phagocytized by bacteriocyte cells of the gill. It is proposed that this association could be a form of symbiosis and that L. lucinalis may, therefore, be a rare example of an organism adapted to harbour two very different symbioses.     

Comparison of allozyme and mitochondrial DNA spatial differentiation in the limpet Patella vulgata

Allozyme and restriction enzyme analysis of mtDNA was used to study variation in samples from British populations of the marine limpet Patella vulgata in two regions. South Wales and Northeast England. Allozyme analysis revealed significant differences in allele frequencies among samples. However F _ST (population differentiation) values were no higher between than within regions, indicating that genetic heterogeneity was localised and not related to geographic separation. For mtDNA, samples from South Wales exhibited higher haplotype diversity values than samples from Northeast England. In addition there were substantial differences in the haplotype distribution between regions. The value of , the haploid analogoue of F _ST , was low within regions (=0.09) but high between regions (=0.44). The estimated difference in migration rate for allozymes and mtDNA exceed the neutral expectation, unless it is assumed that there are influential differences in the magnitude of female and male gametic dispersal.     

Biodegradation of undecylbenzenesulphonate by mixed methane-oxidizing culture

Biodegradation of undecylbenzenesulphonate (C(11)LAS) was performed in shake flasks at 21 degrees C by using a mixed methanotrophic-heterotrophic culture containing type II methanotrophs. Concentrations of C(11)LAS and aromatic intermediates were determined by reversed-phase high-performance liquid chromatography (RP-HPLC). Methane and carbon dioxide concentrations were measured in headspace samples by using gas chromatography. RP-HPLC analyses of aqueous samples show that the culture MM1 expresses the capability of C(11)LAS transformation in the presence or absence of methane. Simultaneous methane oxidation and C(11)LAS degradation, and the inhibition of both transformation processes by acetylene were observed. This suggests the possibility that C(11)LAS transformation is catalyzed by methane monooxygenase (MMO). Comparable affinity of culture MM1 for both methane and C(11)LAS ( [Formula: see text], respectively), and more than four times higher maximum transformation rate for methane than for C(11)LAS ( [Formula: see text] (dry weight) cells day(-1), respectively), were determined. This further supports the involvement of MMO enzyme system in transformation and suggests a pronounced competitive inhibition of C(11)LAS degradation by methane.     

Phytomonitoring and management of tar piles on the Qatari coastal marshes, Arabian Gulf

Most of the shores in Qatar and other oil producing countries have had a long history of crude oil pollution from different sources. This pilot study was to assess the problem and suggest a management programme for disposing of the collected tar or lessening the impact of tar accumulation. The vegetation on the sites used for dumping tar was used in a field survey to identify bioindicators of tar pollution and of the natural recovery of polluted sites. The phytomonitoring results indicate that recovery of polluted sites can be quite rapid after clean-up and restoration. To facilitate natural plant invasion and colonization, and the restoration of tar piles, the dumping sites must have plant communities with high species diversity and a high percentage of annual plants. Depending on the sand-tar ratio in the piles, artificial seeding of selected plant species (listed) can be applied by using species mixes or single species seeding. Management techniques are suggested to optimize the natural recovery and revegetation of tar-affected coastal marshes.     

Interactions between copper and cadmium modify metal organ distribution in mature tilapia, Oreochromis mossambicus

Sexually mature female tilapia were exposed to sublethal concentrations of waterborne Cu and/or Cd over 6 days, and subsequent body concentrations of these metals were determined in several organs. The results show that the distribution of Cu and Cd was metal and organ specific. This is demonstrated, for example, by the observation that in tilapia, Cu exposure did not result in Cu accumulation in the liver, whereas in the intestinal wall, notably high concentrations of Cu and Cd were measured in metal exposed fish. In addition to single metal exposed fish, we also determined Cu and Cd body distribution in Cu?Cd co-exposed fish. The observed interactions in metal accumulation were most pronounced in the organs of fish exposed to low, environmentally realistic, metal concentrations.