Management strategies to mitigate the impacts of climate change on sea turtle’s terrestrial reproductive phase

Climate change poses a serious threat to sea turtles (Cheloniidae) as their terrestrial reproductive phase is only successful within a limited range of environmental and physical conditions. These conditions are likely to become less optimal as climate change progresses. To date, management and conservation of sea turtles has focused almost entirely on non-climatic stressors, due at least in part to practitioners not knowing what strategies to take and the feasibility and risks of potential strategies. To aid the management of sea turtles in a changing environment, we identified management strategies via a focus workshop and surveys to mitigate the impacts of climate change to the terrestrial reproductive phase of sea turtles. The effectiveness, ecological risks and potential social and logistical constraints associated with implementing each of the identified management strategies is discussed. Twenty management strategies were identified; strategies varied from habitat protection to more active and direct manipulation of nests and the nesting environment. Based on our results, we suggest a three-pronged approach to sea turtle conservation in light of climate change, where managers and researchers should: 1) enhance sea turtle resilience to climate change by mitigating other threats; 2) prioritise implementing the ‘no regret’ and ‘reversible’ management strategies identified here; and 3) fill the knowledge gaps identified to aid the trial and implementation of the potential strategies identified here. By combining these three approaches our collective toolkit of sea turtle management strategies will expand, giving us an array of viable approaches to implement as climate change impacts become more extreme.     

Land use change and forestry climate project regional baselines: a review

Climate change programs have largely used the project-specific approach for estimating baseline emissions of climate mitigation projects. This approach is subjective, lacks transparency, can generate inconsistent baselines for similar projects, and is likely to have high transaction costs. The use of regional baselines, which partially addresses these issues, has been reported in the literature on forestry and agriculture projects, and in greenhouse gas (GHG) mitigation program guidance for them (e.g., WRI/WBCSD GHG Project Protocol, USDOE’s 1605(b) registry, UNFCCC’s Clean Development Mechanism). This paper provides an assessment of project-specific and regional baselines approaches for key baseline tasks, using project and program examples. The regional experience to date is then synthesized into generic steps that are referred to as Stratified Regional Baselines (SRB). Regional approaches generally, and SRB in particular explicitly acknowledge the heterogeneity of carbon density, land use change, and other key baseline driver variables across a landscape. SRB focuses on providing guidance on how to stratify lands into parcels with relatively homogeneous characteristics to estimate conservative baselines within a GHG assessment boundary, by applying systematic methods to determine the boundary and time period for input data.

Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites

The development and implementation of a microstructure-based finite element model for the machining of carbon fiber-reinforced polymer composites is presented. A new approach to interfacial modeling is introduced where the material interface is modeled using continuum elements, allowing failure to take place in either tension or compression. The model is capable of describing the fiber failure mode occurring throughout the chip formation process. Characteristic fiber length in the chips, and machining forces for microstructures with fibers orientated at 0°, 45°, 90°, and 135° are examined. For model validation purposes, the model-based machining performance predictions are compared to the machining responses from a set of orthogonal machining experiments. A parametric study is presented that identifies a robust tool geometry, which minimizes the effects of fiber orientation and size on the machining forces.     

Automated micro-transfer printing with cantilevered stamps

This paper demonstrates the use of a flexible instrumented stamp to enable automated micro transfer printing as a route to large-area, deterministic assembly of microstructured device components or ‘inks’. The ability to instrument the stamp, a critical component for retrieval and placement of a micro device, to detect contact and monitor localized forces during critical events in the printing process not only allows for the development of a robust manufacturing process, but also for a unique vantage point from which to study fundamental issues and phenomena associated with adhesion and delamination of thin films from a variety of substrate materials. This paper presents basic design analysis on the requirements of the cantilevers for compatibility with a typical transfer printing environment. Off-the-shelf thin film strain gages are integrated with a thin elastomeric post as a preliminary prototype and the feasibility of transfer printing with it is demonstrated. Further, the set-up is calibrated to produce force signals for event detection and in situ diagnosis of the process.     

Frequency of tail loss does not reflect innate predisposition in temperate New Zealand lizards

Caudal autotomy (tail shedding) is a defence mechanism against predation which is used by lizards when other tactics, such as crypsis and escape, prove ineffective. The speed at which autotomy occurs has important implications for survival, and the accuracy of tail loss is of consequence for an individual’s future fitness. Autotomy is shaped by both taxon-specific tail morphology as well as environmental factors such as predator history, and it can be difficult to distinguish between these processes. In this study, the frequency of tail-regeneration observed (field rate of autotomy), latency (speed of autotomy in the laboratory) and accuracy of tail loss were measured in six lizard species from two families (Scincidae and Diplodactylidae). The field rate and latency of autotomy was similar among all species except for the large nocturnal skink Oligosoma macgregori, which was less likely to autotomise. Latency and field rates of autotomy were not correlated, implying that the field rates of autotomy are related to predation attacks, social interactions, or some other environmental factor, rather than an innate disposition to autotomy. Further study, for example comparing populations with low and high predation pressure, will help to explain which of these factors are influencing autotomy rates.     

Issues Concerning Survival of Viruses on Surfaces

Viruses are the causative agents of an estimated 60% of human infections worldwide. The most common viral illnesses are produced by enteric and respiratory viruses. Transmission of these viruses from an infected person or animal to a new host can occur via several routes. Existing studies strongly suggest that contaminated fomites or surfaces play an important role in the spreading of viral diseases. The potential of viral spreading via contaminated surfaces depends particularly on the ability of the virus to maintain infectivity whilst it is in the environment. This is affected by a combination of biological, physical and chemical factors. This review summarises current knowledge about the influence of environmental factors on the survival and spread of viruses via contaminated surfaces.     

Carbon Budget Implications of the Transition from Natural to Managed Disturbance Regimes in Forest Landscapes

Land-use change from an unmanaged to a managed forested landscape in northern forests is associated with a reduction of the area annually affected by natural disturbances (wildfires and forest insects) and the introduction of harvesting as a new disturbance. This study examined the impacts of changes in the disturbance regime-the frequency and type of disturbance-on landscape-level carbon (C) content and fluxes. The Carbon Budget Model of the Canadian Forest Sector was used to assess these impacts in six representative landscapes (100,000 ha each) with a range of disturbance regimes that are characteristic of conditions in coastal British Columbia, the interior of British Columbia, and the eastern boreal forest in Canada. The model was used to simulate ecosystem C fluxes during a period of natural disturbances, a 50-year transition period during which harvesting replaced natural disturbances, followed by 150 years of harvesting. The initial landscape-level biomass C content under natural disturbance regimes in the six example landscapes was 22 to 75% of their potential maximum content which is often used as the reference or baseline case. After 200 years of forest management, the C stored in the landscape plus the C retained in forest products manufactured from harvested biomass was between 58 and 101% of the landscape C content prior to the onset of harvesting. Landscape-level ecosystem C content was found to be affected by changes in the disturbance frequency, the age-dependence of the disturbance probabilities, and the disturbance-specific impacts on ecosystem C content. The results indicate that using the potential maximum C content of a landscape as the baseline always overestimates the actual C release due to land use change. A more meaningful procedure would be to assess the actual differences in landscape-level C content between the natural and the managed disturbance regime.