Effects of the mosquito larvicide GB-1111 on bird eggs

Golden Bear Oil (GB-1111; legal trade name for GB-1313) is a petroleum distillate used in the United States and other countries as a mosquito larvicide. As part of an evaluation of the potential effects of GB-1111 on birds, fertile eggs of mallards (Anas platyrhynchos) and bobwhite (Colinus virginianus) were incubated in the laboratory, and treated on day 4 of incubation with external applications equivalent to either 0, 1/3, 1, 3 or 10 times the maximum rate (X) of 47 l/ha (5 gal/A) of field application of GB-1111. Hatching success was significantly reduced in mallards treated at 3 and 10 times the maximum field application, with a calculated approximate LD50 of 1.9 times the maximum field application. Most mortality occurred within a week of treatment. Hepatic P450-associated monooxygenase activity (ethoxyresorufin-O-dealkylase; EROD) was negatively related to dose. In the 3X group there was a significant increase in the concentration of hepatic reduced glutathione (GSH) but a decrease in protein-bound thiols (PBSH). Hatching success of bobwhite was marginally reduced at the highest level of treatment (10X). Other effects at this level in bobwhite included a significant increase in incidence of abnormal embryos or hatchlings, lower body and liver weights, and a two-fold increase in hepatic microsomal EROD activity in hatchlings. The recommended maximum rate of field application of GB-1111 is unlikely to impair the survival or development of bobwhite embryos but is potentially toxic to mallard embryos under conditions of larvicide drift or spray overlap.     

Comparison of various advanced oxidation processes and chemical treatment methods for COD and color removal from a polyester and acetate fiber dyeing effluent

In this paper, a comparison of various advanced oxidation processes (O3, O3/UV, H2O2/UV, O3/H2O2/UV, Fe2+/H2O2) and chemical treatment methods using Al2(SO4)3.18H2O, FeCl3 and FeSO4 for the chemical oxygen demand (COD) and color removal from a polyester and acetate fiber dyeing effluent is undertaken. Advanced oxidation processes (AOPs) showed a superior performance compared to conventional chemical treatment, which maximum achievable color and COD removal for the textile effluent used in this study was 50% and 60%, respectively. Although O3/H2O2/UV combination among other AOPs methods studied in this paper was found to give the best result (99% removal for COD and 96% removal for color), use of Fe2+/H2O2 seems to show a satisfactory COD and color removal performance and to be economically more viable choice for the acetate and polyester fiber dyeing effluent on the basis of 90% removal.     

Polychlorinated biphenyls and chlorinated pesticides in mussels from the Egyptian Red Sea coast

The residues of 17 organochlorine pollutants were analyzed in bivalve Brachiodontes sp. collected from 11 different locations in April 2000 along the Egyptian Red Sea coast. The pollutants studied were 10 individual polychlorinated biphenyl (PCB) congeners, alpha,alpha,alpha-hexachlorocyclohexane (HCHs), cyclodienes (heptachlor, heptachlorepoxide, aldrin, dieldrin) and dichlorodiphenyltrichloroethanes (DDTs) (p,p'-DDE, p,p'-DDD and p,p'-DDT). The concentration of total DDTs ranged between 125 and 772 ng/g of wet weight whereas the concentration of the PCBs, HCHs and cyclodienes ranged from 6.7 to 66.4 ng/g; 16.2 to 183.4 ng/g and 8.8 to 221.6 ng/g of wet weight, respectively. The levels are low to moderate in relation to the published data from other coastal areas. The present results indicate low to moderate PCBs and pesticides contamination in the investigated mussels except DDTs.     

Treatment and detoxification of a sanitary landfill leachate

The leachate from an old sanitary landfill (Gramacho Metropolitan Landfill, Rio de Janeiro) was characterized and submitted to coagulation and flocculation treatment followed by ozonation and ammonia stripping. The performance of the treatment was assessed by monitoring the removal of organic matter (COD and TOC), ammonium nitrogen and metals. Detoxification was assessed by determining acute toxicity, using the following organisms: Vibrio fisheri, Daphnia similis, Artemia salina and Brachydanio rerio. Membrane fractionation was employed to infer the range of molecular masses of the pollutants found in the effluent, as well as the toxicity associated to these fractions. Of the techniques under investigation, coagulation and flocculation followed by ammonia stripping were the most effective for toxicity and ammonium nitrogen removal. Membrane fractionation was effective for COD removal; however, acute toxicity was almost the same in all the fractionated samples. Ozonation was moderately effective for COD removal, but significant toxicity removal was only attained when high ozone doses were used.     

Gas-phase mercury reduction to measure total mercury in the flue gas of a coal-fired boiler

Gaseous elemental and total (elemental + oxidized) mercury (Hg) in the flue gas from a coal-fired boiler was measured by a modified ultraviolet (UV) spectrometer. Challenges to Hg measurement were the spectral interferences from other flue gas components and that UV measures only elemental Hg. To eliminate interference from flue gas components, a cartridge filled with gold-coated sand removed elemental Hg from a flue gas sample. The Hg-free flue gas was the reference gas, eliminating the spectral interferences. To measure total Hg by UV, oxidized Hg underwent a gas-phase, thermal-reduction in a quartz cell heated to 750 degrees C. Simultaneously, hydrogen was added to flash react with the oxygen present forming water vapor and preventing Hg re-oxidation as it exits the cell. Hg concentration results are in parts per billion by volume Hg at the flue gas oxygen concentration. The modified Hg analyzer and the Ontario Hydro method concurrently measured Hg at a field test site. Measurements were made at a 700-MW steam turbine plant with scrubber units and selective catalytic reduction. The flue gas sampled downstream of the selective catalytic reduction contained 2100 ppm SO2 and 75 ppm NOx. Total Hg measured by the Hg analyzer was within 20% of the Ontario Hydro results.     

Inactivation of bacteria under visible light and in the dark by Cu films. Advantages of Cu-HIPIMS-sputtered films

Introduction

The Cu polyester thin-sputtered layers on textile fabrics show an acceptable bacterial inactivation kinetics using sputtering methods.

Materials and methods

Direct current magnetron sputtering (DCMS) for 40?s of Cu on cotton inactivated Escherichia coli within 30?min under visible light and within 120?min in the dark. For a longer DCMS time of 180?s, the Cu content was 0.294% w/w, but the bacterial inactivation kinetics under light was observed within 30?min, as was the case for the 40-s sputtered sample.

Results and discussion

This observation suggests that Cu ionic species play a key role in the E. coli inactivation and these species were further identified by X-ray photoelectron spectroscopy (XPS). The 40-s sputtered samples present the highest amount of Cu sites held in exposed positions interacting on the cotton with E. coli. Cu DC magnetron sputtering leads to thin metallic semi-transparent gray?Cbrown Cu coating composed by Cu nanoparticulate in the nanometer range as found by electron microscopy (EM). Cu cotton fabrics were also functionalized by bipolar asymmetric DCMSP.

Conclusion

Sputtering by DCMS and DCMSP for longer times lead to darker and more compact Cu films as detected by diffuse reflectance spectroscopy and EM. Cu is deposited on the polyester in the form of Cu₂O and CuO as quantified by XPS. The redox interfacial reactions during bacterial inactivation involve changes in the Cu oxidation states and in the oxidation intermediates and were followed by XPS. High-power impulse magnetron sputtering (HIPIMS)-sputtered films show a low rugosity indicating that the texture of the Cu nanoparticulate films were smooth. The values of R _q and R _a were similar before and after the E. coli inactivation providing evidence for the stability of the HIPIMS-deposited Cu films. The Cu loading percentage required in the Cu films sputtered by HIPIMS to inactivate E. coli was about three times lower compared to DCMS films. This indicates a substantial Cu metal savings within the preparation of antibacterial films.     

Effects of fluoxetine on the reproduction of two prosobranch mollusks: Potamopyrgus antipodarum and Valvata piscinalis

Fluoxetine is a widely used antidepressant, frequently found in aquatic ecosystems. We investigated its effects on two freshwater prosobranch gastropods: Valvata piscinalis (European valve snail) and Potamopyrgus antipodarum (New Zealand mudsnail), which have different reproductive modes. The fecundity of V. piscinalis (cumulate number of eggs at day 42) was not affected with an NOEC of 100 μg/L nominal concentration (69 μg/L measured concentration). The mudsnail P. antipodarum responded in a biphasic dose-effect curve at low concentrations. The cumulate number of neonates at day 42 had an LOEC of 100 μg/L (69 μg/L) and an NOEC of 33.3 μg/L (13 μg/L), whereas the embryos in the brood pouch at day 42 only showed an LOEC of 3.7 μg/L (1 μg/L). We also observed histological effects in P. antipodarum (gonadal thickness). Among the sexual steroids we measured only testosterone which varied, independent of reproduction. Moreover the use of two closely related species highlights the interspecific variability.     

Comparison of an assay for Dehalococcoides DNA and a microcosm study in predicting reductive dechlorination of chlorinated ethenes in the field

The study aims to compare the detection of 16S rRNA gene of Dehalococcoides species and the microcosm study for biotransformation in predicting reductive dechlorination of chlorinated ethenes in ground water at hazardous waste sites. A total of 72 ground water samples were collected from 12 PCE or TCE contaminated sites in the United States. The samples were analyzed and used to construct microcosms in the laboratory. The results showed that the presence of Dehalococcoides DNA was well associated with dechlorination to ethene in the field. Nearly half of the wells where Dehalococcoides DNA was detected had ethene as a dechlorination end product. In comparison, for ground water samples of 16 wells where ethene was detected, ethene was produced in 11 of the corresponding microcosms. For most microcosms, during two years of incubation, dechlorination was less extensive than that observed in the field.     

The function of dart behavior in the paper wasp, Polistes fuscatus

Dominance behavior in Polistes wasps is a composite trait consisting of various discrete behaviors such as darts, lunges, bites, and mounts. The majority of these behaviors are considered aggressive, and these aggressive behaviors are considered to form a continuum from mild (e.g., darts) to severe (e.g., falling fights). In this paper we focus on darts, the most common of the dominance behaviors, and investigate their function in un-manipulated post-emergent colonies of the primitively eusocial wasp P. fuscatus. Here we show that darts are correlated with the more severe dominance behaviors, and that dominance ranks do not change with the addition or exclusion of darts. We find no correlation, however, between receiving darts and receiving more severe dominance behaviors. This result suggests that darts are not indicative of aggressive reinforcement of dominance, but rather may serve a different function. Our data suggest that the function of darts is to regulate activity on nests. Both foundresses and workers dart inactive workers significantly more often than by chance, and workers respond to a foundresss (but not a workers) dart by becoming less inactive. We also found that active workers who receive a dart from either a foundress or worker respond mostly by switching from one activity to another. Thus, our data suggest that darts are not aggressive behaviors, that foundresses use this signal to initiate activity, and that foundresses and workers both use the signal to regulate worker activity.