Biosorption and biodegradation of Acid Orange 7 by Enterococcus faecalis strain ZL: optimization by response surface methodological approach

Reactive dyes account for one of the major sources of dye wastes in textile effluent. In this study, decolorization of the monoazo dye, Acid Orange 7 (AO7) by the Enterococcus faecalis strain ZL that isolated from a palm oil mill effluent treatment plant has been investigated. Decolorization efficiency of azo dye is greatly affected by the types of nutrients and the size of inoculum used. In this work, one-factor-at-a-time (method and response surface methodology (RSM) was applied to optimize these operational factors and also to study the combined interaction between them. Analysis of AO7 decolorization was done using Fourier transform infrared (FTIR) spectroscopy, desorption study, UV–Vis spectral analysis, field emission scanning electron microscopy (FESEM), and high performance liquid chromatography (HPLC). The optimum condition via RSM for the color removal of AO7 was found to be as follows: yeast extract, 0.1 %?w/v, glycerol concentration of 0.1 %?v/v, and inoculum density of 2.5 %?v/v at initial dye concentration of 100 mg/L at 37 °C. Decolorization efficiency of 98 % was achieved in only 5 h. The kinetic of AO7 decolorization was found to be first order with respect to dye concentration with a k value of 0.87/h. FTIR, desorption study, UV–Vis spectral analysis, FESEM, and HPLC findings indicated that the decolorization of AO7 was mainly due to the biosorption as well as biodegradation of the bacterial cells. In addition, HPLC analyses also showed the formation of sulfanilic acid as a possible degradation product of AO7 under facultative anaerobic condition. This study explored the ability of E. faecalis strain ZL in decolorizing AO7 by biosorption as well as biodegradation process.     

Visible-light-driven photocatalytic dual-layer hollow fibre membrane ameliorates the changes of bisphenol A exposure in gastrointestinal tract

Environmental Science and Pollution Research - Various treatments of choice are available to overcome contamination of bisphenol A (BPA) in the environment including membrane technologies; however,...     

Risk Assessment of Physico-Chemical Contaminants in Groundwater of Pettavaithalai Area, Tiruchirappalli, Tamilnadu – India

A study was carried out in Pettavaithalai area to evaluate the current status of physico-chemical contaminants and their sources in groundwater. Groundwater samples collected from pettavaithalai area in 15 different stations were analyzed every alternative months over a period of two years from August 2000 to June 2002. A sugar mill is situated at the heart of the study area. Three profiles (profile A, B and C) were selected based on the direction in which the sugar mill effluent flows. In each profile five samples were collected from five different station at a regular distance of about 1 Km. The physico-chemical parameters such as pH, EC TDS, TH, NO₃, SO₄, PO₄, Na, K, Ca, Mg, DO, BOD and COD have been analyzed. The results showed that among the three profiles, many of the estimated physico-chemical parameters of profile C were very high when compared to profile B and A which indicates the poor quality of the groundwater around this area.     

Factors Affecting Participating Farmers’ Willingness-to-pay for the Tree Farming Fund: A Study in a Participatory Forest in Bangladesh

This paper examined the factors that might influence participating farmers’ willingness-to-pay for the Tree Farming Fund (TFF) established for sustainable development of participatory forest management (PFM). Information on willingness-to-pay, socioeconomic characteristics, and attitudes of participating farmers toward TFF were obtained from interviews with 581 participating farmers. Logistic regression analysis was used to determine the dominant factors that might influence participating farmers’ willingness-to-pay for the TFF. The results showed that participating farmers’ willingness-to-pay was significantly affected by (i) family income; (ii) education level; (iii) confidence that his aspired benefits will be received; (iv) agreement with the statement that ‘PFM is sustainable under the present state of management’; (v) agreement with the statement that ‘PFM is a good strategy for forest conservation’; and (vi) knowledge of PFM strategies. Thus, participating farmers with a higher level of education, higher income and positive attitudes toward TFF tended to express more willingness-to-pay. Establishment of TFF could be an effective strategy in implementing sustainable PFM in Bangladesh. For this strategy to succeed, however, active partnership between the participating farmers and Forest Department is required. Participating farmers’ attitudes toward TFF should therefore be taken into consideration as should the results of this study, which are important indicators of participating farmers’ positive attitudes toward TFF.     

A quantitative investigation of methane gas and solid waste management in mountainous Srinagar city-A case study

Journal of Material Cycles and Waste Management - Methane has tremendous potential for energy production, and enormous amounts of energy can be produced using suitable technology. To address this...     

Label-free colorimetric nanosensor with improved sensitivity for Pb2+ in water by using a truncated 8–17 DNAzyme

• Unmodified-AuNP based, colorimetric nanosensor was constructed for Pb²⁺ detection. • 5-nucleotide truncation in DNAzyme made complete substrate detachment upon Pb²⁺. • Ultrasensitive and selective detection of Lead (II) was achieved with 0.2×10^-9 mol/L LOD. Water pollution accidents, such as the Flint water crisis in the United States, caused by lead contamination have raised concern on the safety of drinking water distribution systems. Thus, the routine monitoring of lead in water is highly required and demands efficient, sensitive, cost-effective, and reliable lead detection methods. This study reports a label-free colorimetric nanosensor that uses unmodified gold nanoparticles (AuNPs) as indicators to enable rapid and ultra-sensitive detection of lead in environmental water. The 8–17 DNAzyme was truncated in this study to facilitate the detachment of single-stranded DNA fragments after substrate cleavage in the presence of Pb²⁺. The detached fragments were adsorbed over AuNPs and protected against salt concentration-induced aggregation. Accordingly, high Pb²⁺ would result in rapid color change from blue to pink. The established sensing principle achieved a sensitive limit of detection of 0.2×10^-9 mol/L Pb²⁺, with a linear working range of two orders of magnitude from 0.5×10^-9 mol/L to 5×10^-9 mol/L. The selectivity of the nanosensor was demonstrated by evaluating the interfering metal ions. The developed nanosensor can serve as a substitute for the rapid analysis and monitoring of trace lead levels under the drinking water distribution system and even other environmental water samples.     

Trichoderma harzianum: a green sorbent for Pb(II) uptake from aqueous solutions

This investigation describes the use of specially cultivated, nonliving biomass of Trichoderma harzianum as a biosorbent for the batch removal of Pb(II) from a stirred system under different experimental conditions. The metal removal depended upon pH, sorbent particle size, initial Pb(II) concentration, shaking speed, and sorption time. The optimal experimental conditions for the removal of Pb(II) by T. harzianum with an initial metal concentration of 100 mg L^?1 were obtained at a particle size of 53 μm, a pH of 4.5, a shaking speed of 200 rpm, and a contact time of 720 min. The results were analyzed in terms of adsorption isotherms and kinetic models. The Freundlich isotherm model and pseudo second-order model fitted well in the data. T. harzianum proved to be a good biomaterial for accumulating Pb(II) from aqueous solutions (q = 460 mg g^?1).     

Modeling and simulation of landfill gas production from pretreated MSW landfill simulator

The cumulative landfill gas (LFG) production and its rate were simulated for pretreated municipal solid waste (MSW) landfill using four models namely first order exponential model, modified Gompertz model, single component combined growth and decay model and Gaussian function. Considering the behavior of the pretreated MSW landfill, a new multi component model was based on biochemical processes that occurring in landfilled pretreated MSW. The model was developed on the basis of single component combined growth and decay model using an anaerobic landfill simulator reactor which treats the pretreated MSW. It includes three components of the degradation i.e. quickly degradable, moderately degradable and slowly degradable. Moreover, the developed model was statistically analyzed for its goodness of fit. The results show that the multi components LFG production model is more suitable in comparison to the simulated models and can efficiently be used as a modeling tool for pretreated MSW landfills. The proposed model is likely to give assistance in sizing of LFG collection system, generates speedy results at lower cost, improves cost-benefit analysis and decreases LFG project risk. It also indicates the stabilization of the landfill and helps the managers in the reuse of the landfill space. The proposed model is limited to aerobically pretreated MSW landfill and also requires the values of delay times in LFG productions from moderately and slowly degradable fractions of pretreated MSW.     

Biosynthesis and Characterization of Poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) from Bacillus cereus S10

The biodegradable and biocompatible copolymer poly-(3-hydroxybutyrate-co-5 mol% 3-hydroxyvalerate), poly-(3HB-co-5 mol% 3HV), was synthesized by Bacillus cereus S10 and the highest yield was determined as 69.91 % at pH 7 and 30 °C after 48 h of incubation using a glucose as the sole carbon source. Poly-(3HB-co-5 mol% 3HV) was purified from bacterial biomass using chloroform. FTIR analysis showed absorption bands at 1,723, 1,274, 1,373, 1,453, 2,932 cm^?1 corresponding to C=O, C–O stretching, CH₃, –CH₂ and –CH groups, respectively. ¹H-NMR and ¹³C-NMR analysis confirmed that the copolymer was composed of 95 mol% of 3-hydroxybutrate and 5 mol% of 3-HV monomeric units. Poly-(3-HB-co-5 mol% 3HV) was used for nanoparticles preparation. The diameter of nanoparticles was 202 nm.     

Thermodynamic analysis of metals recycling out of waste printed circuit board through secondary copper smelting

Journal of Material Cycles and Waste Management - In this paper, a detailed thermodynamic analysis of processing of electronic waste (e-waste), particularly printed circuit boards (PCB), through...