Higher oil biodegradation potential at the Arabian Gulf coast than in the water body

Littoral materials collected from the intertidal zone along the coast of Kuwait City were associated with much higher numbers of oil-utilizing microorganisms than inshore and offshore water samples. Animate materials viz. epilithic biomass, cyanobacterial mats and roots of higher plants were richer in such microorganisms than inanimate materials, e.g. littoral sand, rock pieces, shells and others. Those numbers remained highest during the autumn, winter and spring and decreased dramatically during the hot summer. By far, the predominant indigenous oil-utilizing bacterium in the marine environment of Kuwait was Acinetobacter calcoaceticus. Less dominant organisms included Micrococcus sp., nocardioforms and others. Coast-immobilized strains of A. calcoaceticus and Micrococcus sp. had a higher hydrocarbon degradation potential than planktonic strains of the same organisms. It was concluded that marine coasts have a much higher potential for oil biodegradation than the water body. Received: 28 April 1999 / Accepted: 23 September 1999     

Environmental planning and management for the Assarawat highland region of south-western Saudi Arabia: the traditional versus the professional approach

The environmental planning and management of the Assarawat highlands of south-western Saudi Arabia are currently confronted by difficult problems. Deforestation is caused either by natural or intentional forces. Natural factors are limited to lightning fire and drought, while intentional forces include vandalism caused by the burning or cutting of preserved forests. Such vandalism continues despite the tremendous efforts of afforestation and preservation by several government agencies, especially the Ministry of Agriculture and Water, the National Commission for Wildlife Conservation and Development and by the municipalities of the cities and towns in the region. For centuries, local inhabitants of the Assarawat highlands have successfully established environmental planning and management strategies which balanced the settlements' growth and natural resource uses according to Islamic laws, and the tribal self-government of each settlement and tribal region. Following the establishment of the Kingdom of Saudi Arabia in 1932, the land management system started to change from tribal-based, where every tribe used to manage its local territory, to State authority. The creation of the State witnessed the unification of various fragmented tribes of Saudi Arabia into one government. This meant that environmental planning and management moved from local/regional towards a national control. This investigation proposes that the local/regional planning and management practised by the tribes could be viably utilized today. As in the past, the implementation of these practices could protect the natural environment of the locality and region and regularize their exploitation rationally, as long as vernacular people implement them. Today environmental planning and management need to be based on strategies of local requirements that enable the indigenous people to plan and manage the use of the resources.     

Combustion in porous media and its applications – A comprehensive survey

The rapid advances in technology and improved living standard of the society necessitate abundant use of fossil fuels which poses two major challenges to any nation. One is fast depletion of fossil fuel resources; the other is environmental pollution. The porous medium combustion (PMC) has proved to be one of the technically and economically feasible options to tackle the aforesaid problems to a remarkable extent. PMC has interesting advantages compared with free flame combustion due to the higher burning rates, the increased power dynamic range, the extension of the lean flammability limits, and the low emissions of pollutants. This article provides a comprehensive picture of the global scenario of research and developments in PMC and its applications that enable a researcher to decide the direction of further investigation. The works published so far in this area are reviewed, classified according to their objectives and presented in an organized manner with general conclusions. A separate section is devoted for the numerical modeling of PMC.     

The influence of crime prevention through environmental design on victimisation and fear of crime

People's perception of crime and incivilities vary considerably depending on their attitudes towards environmental conditions. This paper investigated the hypothesised relationships between Crime Prevention Through Environmental Design (CPTED), victimisation and fear of crime. The checklist was administered by using on-site observation to measure the CPTED construct followed by a self-administered questionnaire to explore the residents' perceptions of victimisation and fear of crime in their area of residency. In all, 164 respondents from a selected group of residents were involved in this study. The structural equation modelling technique was employed and the results indicate that CPTED is negatively related to victimisation. The model also shows that there is a significant positive direct influence of victimisation on fear of crime. However, no direct significant relationship was found between CPTED and fear of crime, but a negative indirect relationship between CPTED and fear of crime was observed through victimisation.     

The relative importance of factors influencing the adoption of sustainable agricultural practices: a factor approach for Malaysian vegetable farmers

This study develops the understanding of the adoption of sustainable agricultural practices (SAPs) by investigating the relative importance of a set of multidimensional factors in the Malaysian vegetable production sector. A factor approach is deployed to identify explanatory indicators within an integrative framework that is synthesized from the theory of interpersonal behavior and the theory of diffusion of innovation. We achieved this by analyzing a logistic regression model for the adoption of six individual SAPs (conservation tillage, intercropping, cover crops/mulches, crop rotation, organic fertilizers/composts, and integrated pest management). The findings indicate that adoption depends on a range of socio-economic, agro-ecological, institutional, informational, and psychological factors, as well as the perceived attributes of SAPs. Fundamental policy understanding of the issue should, therefore, be multidisciplinary. In addition, standardized coefficients reveal that the impact of statistically significant factors on adoption is unequal. In general, the most influential factor is the asymmetric distribution of resources across geographical locations. This is followed by financial capital and a number of factors, including the workforce size, the usefulness of information, Chinese ethnicity, and the perceived relative advantage of SAPs. Guided by this prioritization understanding, future SAPs promotion now has a better opportunity to target the more important areas. Similar research effort should be made to steer sustainable agriculture internationally.     

Inhalation exposure to volatile organic compounds in the printing industry

ABSTRACT

This study reports on the occupational inhalation exposure to VOCs of workers in the Kuwaiti printing industry. Using the evacuated canister methodology, we targeted 72 VOCs in three printeries and compared the concentrations to previous reports and relevant occupational exposure levels (OELs). We found that recent efforts in the printing industry to reduce VOC usage had been successful, as concentrations of key hazardous VOCs were substantially lower than anticipated. On the other hand, nearly all target VOCs were found. Non-production areas were sampled along with the offset printing areas, another strength of this study, and revealed exposures to hazardous VOCs among administers and digital printer and CTP operators. Exposure to ototoxic VOCs amounted to 1–3% of the OEL, consisting mostly of ethylbenzene, which was likely in use in two of the study printeries. Exposure to carcinogenic or probably carcinogenic VOCs was 15–20% of the OEL at four locations across the three printeries, consisting mostly of vinyl chloride and benzyl chloride. Vinyl chloride VOC was partially sourced from outdoors, but was also likely used inside the study printeries. Interestingly, concentrations of vinyl chloride were similar in most sampling locations to that of CFC-114, a CFC banned by the Montreal Protocol and not commonly used as a refrigerant. This unexpected finding suggests further study is warranted to identify the use of these VOCs in printeries. Exposure to hazardous VOCs up to nearly 50% of the OEL, consisting largely of bromoform and vinyl chloride. Bromoform was found in all the study printeries, sourced partially from outdoor air. The higher concentrations found inside the study printeries likely resulted from the use of the desalinated water for washing. This finding raises of emissions from sources other than blanket washes, and inks, etc. adding to the total VOC load in printery indoor air.

Implications: Results from this study indicate that efforts to reduce worker exposure to VOCs particularly dangerous to human health in recent years have been successful, but there is still much to be done to protect workers. Exposures to ototoxic and carcinogenic VOCs were identified, among both production and non-production workers. Unexpected findings included the apparent use in printing activities of the carcinogen vinyl chloride and CFC-114, banned under the Montreal Protocol. Observed lapses in safety procedures included failure to utilize ventilation systems and closing doors between work areas, indicating management and worker education should remain a priority.     

Decolorization of Blue CL-BR dye by AOPs using bleach wastewater as source of H2O2

This research was focused on the investigation of the efficacy of advanced oxidation processes (Fenton,ozonation and UV/H_2O_2) for decolorization of reactive azo dye (Blue CL-BR) using bleach wastewater as possible source of H_2O_2.All the experiments were performed on the laboratory scale set-up.The results showed that colour removal efficiencies by UV or bleach (H_2O_2) alone were not so efficient.Fenton process with bleach wastewater was found to be the most effective at process conditions such as pH of 3 and H_2O_2/Fe~(2 ) ratio of 24:1,resulting in 64% colour removal.Almost complete colour removal,i.e.,99% and 95% were achieved by UV/H_2O_2 and UVfoleach wastewater in 30 and 60 min,respectively.Ozonation proved an efficient method for decolorization of Blue CL-BR dye at alkaline pH.It was possible to achieve 98% colour removal with 30 min of ozonation at pH 9.The colour removal of dye was found to follow first order kinetics.     

Antibiofouling hollow-fiber membranes for dye rejection by embedding chitosan and silver-loaded chitosan nanoparticles

Environmental Chemistry Letters - The removal of toxic dyes from the wastewater and industrial effluents is a major environmental challenge. Various techniques have been employed for the removal of...     

Performance assessment of 20.4 kW eco-house grid-connected PV plant in Oman

ABSTRACT

The aim of this article is to analyse the performance of the Photovoltaic (PV) and to study the effect of soiling on the energy generation under Muscat environmental conditions. The generated energy is consumed in the eco-house, and the access energy is fed back to the electric grid. Two-ways metre was used to record the energy taken from the grid or fed back to the grid. The system was monitored from December 2014 until today. Various performance parameters of the plant were evaluated which include system efficiency, performance ratio (PR), capacity factor (CF) and different types of PV system losses and yields. The annual average values of recorded ambient temperature and solar radiation were 32°C and 482 W/m², respectively.

The total annual energy produced was 23,595 kWh, whereas the annual average daily reference yield, array yield and final yield were 5.59, 3.78 and 3.64 kWh/kW_P/day, respectively. The annual average daily PR and CF were 0.67 and 0.15, respectively, while the annual average system efficiency was 10.3%. Furthermore, the annual average daily capture, system and cell temperature losses were 1.82, 0.14 and 2.95 h/day,respectively, with a small reduction in energy production when modules left uncleaned.     

Zero waste management of spent mushroom compost

Journal of Material Cycles and Waste Management - Edible mushroom are grown commercially using lignocellulosic waste by applying a biological process. However after the harvesting season about 70%...