Synthesis of Alkyd Resin from Non-Edible Jatropha Seed Oil

The kinetics of polyesterification of glycerol, phthalic anhydride and jatropha oil leading to the formation of alkyd resins were studied. A series of alkyd resins having different amount of jatropha oil viz., 40–80% have been prepared by employing two stage alcoholysis-polyesterification process. The extent of reaction and average degree of polymerisation were calculated from the end group analysis of the reaction mixture withdrawn at regular intervals of time. The initial reaction rates followed the second order kinetics and thereafter deviations were observed. An appreciable degree of conversion was noticed from the extent of the reaction which lies in the range of 49.5–62.5%. The average degree of polymerisation calculated in the region of deviation from second order suggested the occurrence of chain branching at relatively shorter intervals along the polymer chain. The second order rate constants were found to be of the order of 10⁻⁵ g (mg KOH)⁻¹ min⁻¹.     

A holistic approach for optimal design of air quality monitoring network expansion in an urban area

This paper presents an objective methodology for determining the optimum number of ambient air quality stations in a monitoring network. The methodology integrates the multiple-criteria method with the spatial correlation technique. The pollutant concentration and population exposure data are used in this methodology in different ways. In the first stage, the Fuzzy Analytic Hierarchy Process (FAHP) with triangular fuzzy numbers (TFNs) is used to identify the most desirable monitoring locations. The network configuration is then determined on the basis of the concept of sphere of influences (SOIs). The SOIs are dictated by a predetermined cutoff value (r_c) in the spatial correlation coefficients (r) between the pollutant concentrations at the monitoring stations identified from first step and the corresponding concentrations at neighboring locations in the region. Finally, the optimal station locations are ranked by using combined utility scores gained from the first and second steps. The expansion of air quality monitoring network of Riyadh city in Saudi Arabia is used as a case study to demonstrate the proposed methodology.     

Assessment of the impact of petroleum and petrochemical industries to the surrounding areas in Malaysia using mosses as bioindicator supported by multivariate analysis

Biomonitoring of multi-element atmospheric deposition using terrestrial moss is a well-established technique in Europe. Although the technique is widely known, there were very limited records of using this technique to study atmospheric air pollution in Malaysia. In this present study, the deposition of 11 trace metals surrounding the main petroleum refinery plant in Kerteh Terengganu (eastern part of peninsular Malaysia) has been evaluated using two local moss species, namely Hypnum plumaeforme and Taxithelium instratum as bioindicators. The study was also done by means of observing whether these metals are attributed to work related to oil exploration in this area. The moss samples have been collected at 30 sampling stations in the vicinity of the petrochemical industrial area covering up to 15 km to the south, north, and west in radius. The contents of heavy metal in moss samples were analyzed by energy dispersive x-ray fluorescence technique. Distribution of heavy metal content in all mosses is portrayed using Surfer software. Areas of the highest level of contaminations are highlighted. The results obtained using the principal components analysis revealed that the elements can be grouped into three different components that indirectly reflected three different sources namely anthropogenic factor, vegetation factor, and natural sources (soil dust or substrate) factor. Heavy metals deposited mostly in the distance after 9 km onward to the western part (the average direction of wind blow). V, Cr, Cu, and Hg are believed to have originated from local petrochemical-based industries operated around petroleum industrial area.     

Monitoring and assessment of heavy metal/metalloid concentration by inductively coupled plasma mass spectroscopy (ICP-MS) method in Gonyeli Lake,Cyprus

The presence of heavy metals/metalloids in the ecosystem has been an increasing ecological and global public health concern due to their potential to cause adverse health effects. For this reason, the accumulation of some heavy metals such as Cr, Mn, Ni, Cu, As, Cd, Pb was assessed by way of ICP-MS in water, sediment and fish (Cyprinus carpio) sampled from Gonyeli Lake, North Cyprus. The results showed that these metals/metalloids are found widespread throughout the study area. In water, most concentrated element was manganese with 92.1 ppb and least concentrated was lead with 0.914 ppb. In sediment, copper had the highest concentration with 613 ppm, and cadmium the lowest with 1.57 ppm. In fish tissues (muscle and gills), the most concentrated element was manganese with 12.5 ppm and the least concentrated cadmium with 0.017 ppm. These results indicate that future remediation efforts are indispensable for the rehabilitation of the lake.     

Analyzing riparian forest cover changes along the Firniz River in the Mediterranean City of Kahramanmaras in Turkey

Riparian forests adjacent to surface water are important transitional zones which maintain and enrich biodiversity and ensure the sustainability in a forest ecosystem. Also, riparian forests maintain water quality, reduce sediment delivery, enhance habitat areas for aquatic life and wildlife, and provide ecological corridors between the upland and the downstream. However, the riparian ecosystems have been degraded mainly due to human development, forest operations, and agricultural activities. In order to evaluate the impacts of these factors on riparian forests, it is necessary to estimate trends in forest cover changes. This study aims to analyze riparian forest cover changes along the Firniz River located in Mediterranean city of Kahramanmaras in Turkey. Changes in riparian forest cover from 1989 to 2010 have been determined by implementing supervised classification method on a series of Landsat TM imagery of the study area. The results indicated that the classification process applied on 1989 and 2010 images provided overall accuracy of 80.08 and 75 %, respectively. It was found that the most common land use class within the riparian zone was productive forest, followed by degraded forest, agricultural areas, and other land use classes. The results also indicated that the areas of degraded forest and forest openings increased, while productive forest and agricultural areas decreased between the years of 1989 and 2010. The amount of agricultural areas decreased due to the reduction in the population of rural people. According to these results, it can be concluded that special forest management and operation techniques should be implemented to restore the forest ecosystem in riparian areas.     

Monitoring the drastic growth of ship breaking yards in Sitakunda: a threat to the coastal environment of Bangladesh

The vast coastal and marine resources that occur along the southern edge of Bangladesh make it one of the most productive areas of the world. However, due to growing anthropogenic impacts, this area is under considerable environmental pressure from both physical and chemical stress factors. Ship breaking, or the dismantling and demolition of out-of-service ocean-going vessels, has become increasingly common in many coastal areas. To investigate the extent of ship breaking activities in Bangladesh along the Sitakunda coast, various spatial and non-spatial data were obtained, including remote sensing imagery, statistical records and published reports. Impacts to coastal and marine life were documented. Available data show that ship breaking activities cause significant physical disturbance and release toxic materials into the environment, resulting in adverse effects to numerous marine taxonomic groups such as fish, mammals, birds, reptiles, plants, phytoplankton, zooplankton and benthic invertebrates. Landsat imagery illustrates that the negatively impacted coastal area has grown 308.7 % from 367 ha in 1989 to 1,133 ha in 2010. Physicochemical and biological properties of coastal soil and water indicate substantially elevated pollution that poses a risk of local, regional and even global contamination through sea water and atmospheric transport. While damage to the coastal environment of Bangladesh is a recognized hazard that must be addressed, the economic benefits of ship breaking through job creation and fulfilling the domestic demand for recycled steel must be considered. Rather than an outright ban on beach breaking of ships, the enterprise must be recognized as a true and influential industry that should be held responsible for developing an economically viable and environmentally proactive growth strategy. Evolution of the industry toward a sustainable system can be aided through reasonable and enforceable legislative and judicial action that takes a balanced approach, but does not diminish the value of coastal conservation.     

Mapping air quality zones for coastal urban centers

This study presents a new method that incorporates modern air dispersion models allowing local terrain and land–sea breeze effects to be considered along with political and natural boundaries for more accurate mapping of air quality zones (AQZs) for coastal urban centers. This method uses local coastal wind patterns and key urban air pollution sources in each zone to more accurately calculate air pollutant concentration statistics. The new approach distributes virtual air pollution sources within each small grid cell of an area of interest and analyzes a puff dispersion model for a full year’s worth of 1-hr prognostic weather data. The difference of wind patterns in coastal and inland areas creates significantly different skewness (S) and kurtosis (K) statistics for the annually averaged pollutant concentrations at ground level receptor points for each grid cell. Plotting the S-K data highlights grouping of sources predominantly impacted by coastal winds versus inland winds. The application of the new method is demonstrated through a case study for the nation of Kuwait by developing new AQZs to support local air management programs. The zone boundaries established by the S-K method were validated by comparing MM5 and WRF prognostic meteorological weather data used in the air dispersion modeling, a support vector machine classifier was trained to compare results with the graphical classification method, and final zones were compared with data collected from Earth observation satellites to confirm locations of high-exposure-risk areas. The resulting AQZs are more accurate and support efficient management strategies for air quality compliance targets effected by local coastal microclimates.

Implications: A novel method to determine air quality zones in coastal urban areas is introduced using skewness (S) and kurtosis (K) statistics calculated from grid concentrations results of air dispersion models. The method identifies land–sea breeze effects that can be used to manage local air quality in areas of similar microclimates.     

Toxicity of acidization fluids used in California oil exploration

There has been considerable public interest regarding the toxicity of chemicals used in hydraulic fracturing, but little is known about its sister technique, acidizing. Little to no research has been done on what the chemicals of acidization are and what impact they could have on humans and the environment. This paper discusses the differences between three acidizing techniques (acid maintenance, matrix acidization, and acid fracturing) and quantifies the amounts of the chemicals used for each. Washington State's Quick Chemical Assessment Tool is used to identify F-graded toxins, which are known carcinogens, mutagens, reproductive toxins, developmental toxins, endocrine disruptors, or high acute toxicity chemicals. The analysis of the present data shows that there have been over 600 instances of acidizing in urbanized Southern and Central California from April 2013 to August 2015. Although most of the chemicals of acidizing are similar to hydraulic fracturing, those used most frequently are different. There are close to 200 specific chemicals used in acidization, with at least 28 of them being F-graded hazardous chemicals. Some are used frequently in the range of 100–1000 kg per treatment, such as hydrofluoric acid, xylene, diethylene glycol, and ethyl benzene. Close to 90 more chemicals are identified using non-specific names as trade secrets or reported with no quantity. Unlike hydraulic fracturing the chemical concentrations in acidizing are high, ranging from 6% to 18%, and the waste returns can be highly acidic, in the range of pH 0–3. With this paper it is hoped that acidization becomes part of the larger discussion on concerns with oil exploration and be evaluated by appropriate authorities.     

Upgrading of bio-oil from palm kernel shell by catalytic cracking in the presence of HZSM-5

Upgrading of bio-oil extracted from palm kernel shell (PKS) was performed using a lab-scale fixed-bed reactor with HZSM-5 as a catalyst. The catalytic cracking was carried out at optimized conditions: 0.3-MPa pressure, temperature of 500°C, and oil to catalyst ratio of 1:5. One of the challenges in upgrading bio-oil by catalytic cracking is deactivation of catalyst due to coke formation on catalyst surface. To overcome coke deposition, the upgrading process was carried out at 0.3-MPa pressure. Characterization of raw and upgraded bio-oil obtained through catalytic cracking was discussed in detail, indicating improvement in its physical properties. The distribution of products after cracking of bio-oil includes 58.89 wt% of organic liquid product, 15.63 wt% of aqueous fraction, 7.84 wt% of coke, and 17.64 wt% of gases. The degree of deoxygenation and calorific value of organic liquid product is 43.74% and 31.65 MJ/kg respectively. Organic liquid product obtained comprises 17.55% of hydrocarbons within the gasoline range. Hence, HZSM-5 proved its effectiveness for upgrading the bio-oil in a continuous mode.