Thermochemical treatment of sewage sludge ashes for phosphorus recovery

Phosphorus (P) is an essential element for all living organisms and cannot be replaced. Municipal sewage sludge is a carrier of phosphorus, but also contains organic pollutants and heavy metals. A two-step thermal treatment is suggested, including mono-incineration of sewage sludge and subsequent thermochemical treatment of the ashes. Organic pollutants are completely destroyed by mono-incineration. The resulting sewage sludge ashes contain P, but also heavy metals. P in the ashes exhibits low bioavailability, a disadvantage in farming. Therefore, in a second thermochemical step, P is transferred into mineral phases available for plants, and heavy metals are removed as well. The thermochemical treatment was investigated in a laboratory-scale rotary furnace by treating seven different sewage sludge ashes under systematic variation of operational parameters. Heavy metal removal and the increase of the P-bioavailability were the focus of the investigation. The present experimental study shows that these objectives have been achieved with the proposed process. The P-bioavailability was significantly increased due to the formation of new mineral phases such as chlorapatite, farringtonite and stanfieldite during thermochemical treatment.     

Selecting objectively defined reference sites for stream bioassessment programs

Our study develops and demonstrates an objective method for selecting reference sites for the assessment of ecological condition in freshwater ecosystems. The method uses widely available GIS data to group potential sites based on their natural environments. It then establishes the degree and types of human activities each site is exposed to prior to scoring the sites in each group by the relative amount of human activity present. Finally, the sites in each group with the least amount of human activity are categorized as reference sites, with the boundary between reference and test sites defined to maximize the distinctiveness of the two categories with respect to human activity. Application of this technique for the purpose of identifying headwater reference basins in rural areas of southwestern Ontario resulted in the classification of basins into six natural groups based on the dominant texture of the surface geology. Development of a human activity gradient indicated that basins varied according to the amount of exposure to agricultural activities with most basins having at least moderate exposure. Establishment of the reference test boundary indicated that the selected reference basins exhibited substantively lower extents of agricultural activity than test sites for most groups. Because this method uses only widely available GIS data, it enables rapid and cost-effective identification of candidate reference sites, even for large, remote, and understudied regions.     

Determining the role of eudaimonic values in conservation behavior

Values are the fundamental reasons why people engage in conservation behaviors. Recent research has called for a more refined approach to studying values in a way that accounts for the concept of eudaimonia. However, the empirical properties for a eudaimonic value scale have not been tested given that previous investigations have remained at the theoretical level. Drawing from an on-site survey of visitors to Denali National Park and Preserve, Alaska, we used a latent profile analysis to better understand the expression of multiple values of nature. Specifically, we segmented respondents by their value orientations with a particular focus on evaluating eudaimonic and hedonic values, alongside the established dimensions of altruistic, biospheric, and egoistic values. We identified 4 distinct subgroups defined by value orientations and validated these subgroups based on measures of conservation behavior and sociodemographic characteristics (e.g., age). These results indicated campaign messaging should harness a combination of eudaimonic, biospheric, and altruistic values to propel individual behavior. We also observed that hedonic and egoistic values defined how people related to nature and played a role, albeit less pronounced, in motivating them to take action. Our study is one of the first efforts to operationalize eudaimonia in a conservation context; thus, we have opened a new avenue for protected-area managers to align their strategies with the underlying values of stakeholders.     

LANDSCAPE ATTRIBUTES AS CONTROLS ON GROITHD WATER NITRATE REMOVAL CAPACITY OF RIPARIAN ZONES1

ABSTRACT: Inherent site factors can generate substantial variation in the ground water nitrate removal capacity of riparian zones. This paper examines research in the glaciated Northeast to relate variability in ground water nitrate removal to site attributes depicted in readily available spatial databases, such as SSUIRGO. Linking site‐specific studies of riparian ground water nitrate removal to spatial data can help target high‐value riparian locations for restoration or protection and improve the modeling of watershed nitrogen flux. Site attributes, such as hydric soil status (soil wetness) and geomorphology, affect the interaction of nitrate‐enriched ground water with portions of the soil ecosystem possessing elevated biogeochemical transformation rates (i.e., biologically active zones). At our riparian sites, high ground water nitrate‐N removal rates were restricted to hydric soils. Geomorphology provided insights into ground water flowpaths. Riparian sites located on outwash and organic/alluvial deposits have high potential for nitrate‐enriched ground water to interact with biologically active zones. In till deposits, ground water nitrate removal capacity may be limited by the high occurrence of surface seeps that markedly reduce the time available for biological transformations to occur within the riparian zone. To fully realize the value of riparian zones for nitrate retention, landscape controls of riparian nitrate removal in different climatic and physiographic regions must be determined and translated into available spatial databases.     

Assessment of volatile organic compound and hazardous air pollutant emissions from oil and natural gas well pads using mobile remote and on-site direct measurements

Emissions of volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) from oil and natural gas production were investigated using direct measurements of component-level emissions on pads in the Denver-Julesburg (DJ) Basin and remote measurements of production pad-level emissions in the Barnett, DJ, and Pinedale basins. Results from the 2011 DJ on-site study indicate that emissions from condensate storage tanks are highly variable and can be an important source of VOCs and HAPs, even when control measures are present. Comparison of the measured condensate tank emissions with potentially emitted concentrations modeled using E&P TANKS (American Petroleum Institute [API] Publication 4697) suggested that some of the tanks were likely effectively controlled (emissions less than 95% of potential), whereas others were not. Results also indicate that the use of a commercial high-volume sampler (HVS) without corresponding canister measurements may result in severe underestimates of emissions from condensate tanks. Instantaneous VOC and HAP emissions measured on-site on controlled systems in the DJ Basin were significantly higher than VOC and HAP emission results from the study conducted by Eastern Research Group (ERG) for the City of Fort Worth (2011) using the same method in the Barnett on pads with low or no condensate production. The measured VOC emissions were either lower or not significantly different from the results of studies of uncontrolled emissions from condensate tanks measured by routing all emissions through a single port monitored by a flow measurement device for 24 hr. VOC and HAP concentrations measured remotely using the U.S. Environmental Protection Agency (EPA) Other Test Method (OTM) 33A in the DJ Basin were not significantly different from the on-site measurements, although significant differences between basins were observed.

Implications: VOC and HAP emissions from upstream production operations are important due to their potential impact on regional ozone levels and proximate populations. This study provides information on the sources and variability of VOC and HAP emissions from production pads as well as a comparison between different measurement techniques and laboratory analysis protocols. On-site and remote measurements of VOC and HAP emissions from oil and gas production pads indicate that measurable emissions can occur despite the presence of control measures, often as a result of leaking thief hatch seals on condensate tanks. Furthermore, results from the remote measurement method OTM 33A indicate that it can be used effectively as an inspection technique for identifying oil and gas well pads with large fugitive emissions.     

Evaluating technological innovation impact: an empirical analysis of the offshore wind sector

Environmental Science and Pollution Research - This study analyzed the determinants that impact innovation on offshore wind energy (OSW) for a select group of countries, applying mixed-method...     

Predicting Airborne Particle Levels Aboard Washington State School Buses

School buses contribute substantially to childhood air pollution exposures yet they are rarely quantified in epidemiology studies. This paper characterizes fine particulate matter (PM(2.5)) aboard school buses as part of a larger study examining the respiratory health impacts of emission-reducing retrofits.To assess onboard concentrations, continuous PM(2.5) data were collected during 85 trips aboard 43 school buses during normal driving routines, and aboard hybrid lead vehicles traveling in front of the monitored buses during 46 trips. Ordinary and partial least square regression models for PM(2.5) onboard buses were created with and without control for roadway concentrations, which were also modeled. Predictors examined included ambient PM(2.5) levels, ambient weather, and bus and route characteristics.Concentrations aboard school buses (21 mug/m(3)) were four and two-times higher than ambient and roadway levels, respectively. Differences in PM(2.5) levels between the buses and lead vehicles indicated an average of 7 mug/m(3) originating from the bus's own emission sources. While roadway concentrations were dominated by ambient PM(2.5), bus concentrations were influenced by bus age, diesel oxidative catalysts, and roadway concentrations. Cross validation confirmed the roadway models but the bus models were less robust.These results confirm that children are exposed to air pollution from the bus and other roadway traffic while riding school buses. In-cabin air pollution is higher than roadway concentrations and is likely influenced by bus characteristics.