Radon as a naturally occurring tracer for the assessment of residual NAPL contamination of aquifers

The noble gas radon has a strong affinity to non-aqueous phase-liquids (NAPLs). That property makes it applicable as naturally occurring partitioning tracer for assessing residual NAPL contamination of aquifers. In a NAPL contaminated aquifer, radon dissolved in the groundwater partitions preferably into the NAPL. The magnitude of the resulting radon deficit in the groundwater depends on the NAPL-specific radon partition coefficient and on the NAPL saturation of the pore space. Hence, if the partition coefficient is known, the NAPL saturation is attainable by determination of the radon deficit. After a concise discussion of theoretical aspects regarding radon partitioning into NAPL, related experimental data and results of a field investigation are presented. Aim of the laboratory experiments was the determination of radon partition coefficients of multi-component NAPLs of environmental concern. The on-site activities were carried out in order to confirm the applicability of the "radon method" under field conditions.     

Sub-cooled and flashing liquid jets and droplet dispersion I. Overview and model implementation/validation

Many accidents involve two-phase releases of hazardous chemicals into the atmosphere. This paper describes the results of a third phase of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. The aim of the project is to increase the understanding of the behaviour of sub-cooled non-flashing and superheated flashing liquid jets, and to improve the prediction of initial droplet size, droplet dispersion and rainout.Phase III of the JIP first included scaled experiments for materials with a range of volatilities (water, cyclohexane, butane, propane and gasoline). These experiments were carried out by Cardiff University including measurements of flow rate and initial droplet size across the full relevant range of superheats. See the companion paper II for further details of these experiments and the derivation of new refined correlations for droplet size distribution and Sauter Mean Diameter. Furthermore large-scale butane experiments were carried out by INERIS (France) to ensure that for more realistic scenarios the derived droplet size correlations are accurate.Model validation and model improvements were carried out by DNV Software, including validation of release rate and initial droplet size against the above scaled and large-scale experiments. New correlations for droplet size distribution and Sauter Mean Diameter (SMD) were implemented into the Phast discharge model. These were compared against a range of other droplet size and rainout correlations published in the literature, in conjunction with validation against an extensive set of experiments. It was shown that the new droplet size correlation agrees better against experimental data than the existing Phast correlation. To further improve the rainout prediction, the Phast dispersion model (UDM) was also extended to allow simultaneous modelling of a range of droplet sizes and distributed rainout (rather than rainout at one point).     

Sub-cooled and flashing liquid jets and droplet dispersion II. Scaled experiments and derivation of droplet size correlations

This paper describes the results of the first stage of Phase III of a Joint Industry Project (JIP) on liquid jets and two-phase droplet dispersion. This stage included scaled experiments for water, gasoline, and cyclohexane for a range of superheats and nozzles with different aspect ratios. Additional experiments for butane and propane were conducted as a validation exercise and are discussed in the companion paper. Moreover this paper provides recommendations for atomisation correlations in the regimes of mechanical break-up, transition to flashing, and fully flashing. The objectives of this scaled experimental programme are to : (i) provide confidence in the previously proposed modelling methodology (Phase II) across a broad range of initial conditions (ii) update the models’ correlations to generalise further its applicability (iii) recommend further model improvements. Development of new correlations for Sauter Mean Droplet diameter (SMD) and droplet size distribution is based on a best fit of the current scaled experimental data. The new data endorses the previous tri-functional Phase II approach including regimes for mechanical break-up, transition to flashing, and fully flashing, which is hence updated in the new Phase III SMD model. Considerable effort is devoted to capturing the full droplet size range under low-superheat conditions. Also, new enhancements in PDA technology were adopted to enable better quality data under high-superheat conditions. The priority recommendation for further model improvement is better characterisation of the poor quality releases under low-superheat conditions, where this work indicates that extremely broad droplet size distributions are likely. A companion paper (Part I) presents a more general overview of the dispersion problem, implementation of the correlations and subsequent performance against both the current scaled experiments and additional large-scale butane experiments.     

Efficiency of ASTM Method D4994-89 for Recovery of Enteric Viruses from Biosolids

The ASTM Method D4994-89 has been used in the United States for almost two decades to assess the virological quality of biosolids. However, the efficiency of this method for recovery of different enteric viruses has never been determined. The method was found to recover several different enteroviruses and adenovirus 2 with an efficiency ranging from 18.1 ± 5.5 to 24.6 ± 7.8%.     

Economic resilience to natural and man-made disasters: Multidisciplinary origins and contextual dimensions

Economic resilience is a major way to reduce losses from disasters. Its effectiveness would be further enhanced if it could be precisely defined and measured. This paper distinguishes static economic resilience—efficient allocation of existing resources—from dynamic economic resilience—speeding recovery through repair and reconstruction of the capital stock. Operational definitions are put forth that incorporate this important distinction. The consistency of the definitions is examined in relation to antecedents from several disciplines. The effectiveness of economic resilience is evaluated on the basis of recent empirical studies. In addition, its potential to be enhanced and eroded is analyzed in various contexts.     

Remediating RDX-contaminated ground water with permanganate: laboratory investigations for the Pantex perched aquifer

Ground water beneath the U.S. Department of Energy Pantex Plant is contaminated with the high explosive RDX (hexahydro-1,3,5-trinitro-1,3,5 triazine). The USDOE Innovative Treatment and Remediation Demonstration (ITRD) program identified in situ oxidation by permanganate as a technology fit for further investigation. We evaluated the efficacy of KMnO(4) to transform and mineralize RDX by determining degradation kinetics and carbon mass balances using (14)C-RDX. Aqueous RDX solutions (2-5 mg L(-1)) and RDX-contaminated slurries (50% solids, w/v) were treated with KMnO(4) at 1000, 2000, 4000, and 20000 mg L(-1). Treating an aqueous RDX solution of 2.8 mg L(-1) with 20000 mg KMnO(4) L(-1) decreased RDX to 0.1 mg L(-1) within 11 d while cumulative mineralization proceeded for 14 d until 87% of the labeled carbon was trapped as (14)CO(2). Similar cumulative mineralization was obtained when Pantex aquifer material was included in the solution matrix. Other experiments using 4000 mg KMnO(4) L(-1) showed that initial RDX concentrations (1.3-10.4 mg L(-1)) or initial pH (4-11) had little effect on reaction rates. Attempts to identify RDX degradates and reaction products showed that N(2)O was a product of permanganate oxidation and constituted 20 to 30% of the N balance. Time-course measurements of a (14)C-RDX solution treated with KMnO(4) revealed few (14)C-labeled degradates but through liquid chromatography-mass spectrometry (LC-MS) analysis, we present evidence that 4-nitro-2,4-diaza-butanol is formed. Aquifer microcosm studies confirmed that the transformation products not mineralized by KMnO(4) were much more biodegradable than parent RDX. These results indicate permanganate can effectively transform and mineralize RDX in the presence of aquifer material and support its use as an in situ chemical oxidation treatment for the Pantex perched aquifer.     

Rove beetles (Coleoptera: Staphylinidae) collected during the long term ecological research in a Hungarian oak forest

Along term ecological research was carried out in a Hungarian oak forest, in "Bükk" National Park starting with 1972. During the faunistical studies 3,602 insect species and more than 200,000 individuals were collected. The dominant orders were Coleoptera (1,051 species), Lepidoptera (803 species), Hymenoptera (470 species) and Diptera (400 species). The relative species abundance (RSA) for all insects collected in all years of sampling period suggests a rather J shape curve than a not clear scaling property. This means that we were able to identify almost three quarters of the insect species from one ha European oak forest during the survey (from 1987 to 2003), and two third of the staphylinides expected. Considering the staphylinid fauna a total number of 160 species and 4,022 individuals were collected. The most widely occurring species in dominance order were: Ocypus biharicus, Pseudocypus mus, Atheta gagatina, Philonthus quisquiliarius, Oxypoda acuminate, Platydracus chalcocephalus, Atheta crassicomis, Latrimaeum atrocephalum, Haploglossa puncticollis, Philonthus succicola and Anotylus mutator. The pooled value of alpha diversity was 1.51. The Shannon-Weiner Index (H') was relatively high (3.29) in comparison with other studies.