Study of size and mass distribution of particulate matter due to crop residue burning with seasonal variation in rural area of Punjab, India

Emission from field burning of agricultural crop residue is a common environmental hazard observed in northern India. It has a significant potential health risk for the rural population due to respirable suspended particulate matter (RSPM). A study on eight stage size segregated mass distribution of RSPM was done for 2 wheat and 3 rice crop seasons. The study was undertaken at rural and agricultural sites of Patiala (India) where the RSPM levels remained close to the National Ambient Air quality standards (NAAQS). Fine particulate matter (PM(2.5)) contributed almost 55% to 64% of the RSPM, showing that, in general, the smaller particles dominated during the whole study period with more contribution during the rice crop as compared to that of wheat crop residue burning. Fine particulate matter content in the total RSPM increased with decrease in temperature. Concentration levels of PM(10) and PM(2.5) were higher during the winter months as compared to that in the summer months. Background concentration levels of PM(10), PM(2.5) and PM(10-2.5) were found to be around 97 ± 21, 57 ± 15 and 40 ± 6 μg m(-3), respectively. The levels increased up to 66, 78 and 71% during rice season and 51, 43 and 61% during wheat crop residue burning, respectively. Extensive statistical analysis of the data was done by using pair t-test. Overall results show that the concentration levels of different size particulate matter are greatly affected by agricultural crop residue burning but the total distribution of the particulate matter remains almost constant.     

Catalytic Gasification of Coal Using Eutectic Salts: Recovery,Regeneration, and Recycle of Spent Eutectic Catalysts

Abstract

Catalyst recovery studies were conducted for gasified chars produced from steam gasification of Illinois #6 coal catalyzed with two different catalyst systems. A ternary (43.5 mol% Li₂ CO₃ –31.5 mol% Na₂ CO₃ –25 mol% K₂ CO₃ ) and a binary (29 mol% Na₂ CO₃ –71 mol% K₂ CO₃ ) eutectic catalyst system were used for gasifying coal. Various extraction schemes, such as water extraction, H₂ SO₄ extraction, and acetic acid extraction, were evaluated with respect to their extraction efficiencies. Effects of major process variables, such as solvent-to-char ratio, mixing time, temperature, and concentration, on the extraction efficiency were evaluated. A process schematic for the entire catalyst recovery, regeneration, and recycle scheme was developed and the preliminary process economics were determined based on these extraction schemes. H₂ SO₄ extraction was found to be the most desirable. It also turned out to be more attractive than a once-through throwaway system.     

Effect of biopolymer on the dewatering characteristics of autothermal thermophilic aerobic digestion of sludges.

Autothermal thermophilic aerobic digestion of sludge is known to produce poorly dewatering sludges. Laboratory studies were conducted to investigate the reasons for the poor dewatering. It was found that, during digestion, proteins and polysaccharides were released into solution, and that these could be linked to the deterioration in dewatering. The biopolymer release was accompanied by an increase in the monovalent-to-divalent (M/D) cation ratio. The degree to which the M/D caused deterioration of the sludges depended on the presence of iron in sludge. When the iron content was high, the release of protein and polysaccharides was low. When iron was low, the release of protein and polysaccharides increased linearly with the M/D ratio. The dose of conditioning chemicals, cationic polymer or ferric chloride, was related to the amount of colloidal biopolymer present in solution. The findings suggest that the addition of iron during the digestion process has the potential to produce better dewatering sludges.     

Prenatal diagnosis of vascular anomalies

Vascular anomalies are rare disorders that encompass a group of lesions characterized by abnormal development of the lymphovascular system. Majority of these anomalies are present at birth and could potentially be detected during the prenatal period on imaging. This allows for early intervention and prompt management to improve outcomes. However, they can be difficult to diagnose, given the rarity and overlapping findings. In this review article, we provide a comprehensive overview of congenital vascular anomalies with a liberal use of images of recent cases at our center emphasizing prenatal imaging findings and the natural history of these conditions.     

Lead induced spermatoxicity in mouse and MPG treatment

Protective efficacy of MPG (2-mercaptopropionyl glycine) was studied against the toxic effects of lead acetate in Swiss albino mice. The animals were treated with single dose of lead acetate @ 180, 200 and 250 mg/kg b.wt. in presence and absence of MPG. The results indicated that the body weight was slightly higher in MPG treated groups on day 10 as compared to only respective lead treated groups in all the three dose level. However, significantly lower body weight was observed in both lead treated and lead along with MPG treated groups as compared to control. Patten of mortality is similar in both lead treated and lead plus MPG treated groups. Conspicuous degenerative changes in testicular tissues and elevation in sperm head shape abnormality were observed in both lead treated and lead along with MPG treated groups but the sperm head shape abnormality and damage were more in lead treated groups as compared to lead plus MPG treated groups. But this difference was non-significant between the two groups. These observations suggest that MPG may not be significantly effective against lead induced damage in testicular tissues at cellular level. However, MPG is able to maintain slightly lower level of sperm abnormality in all the three dose level as compared to their respective lead treated groups. Further, studies are needed to find out the optimum dose of MPG for protection against the lower doses of lead induced lethality as MPG is not significantly effective against the higher doses of lead.     

Contrasting temporal trends and relationships of total organic carbon, black carbon, and polycyclic aromatic hydrocarbons in rural low-altitude and remote high-altitude lakes

Historical records of total organic carbon (TOC), black carbon (BC), and polycyclic aromatic hydrocarbons (PAHs) were reconstructed in dated sediment cores from four nearby lakes in central Switzerland. In the sub-Alpine Lake Thun, located at 558 m a.s.l., the proximity to anthropogenic emission sources is reflected in higher input of BC and PAHs into sediments with fluxes only slightly decreasing during the last decades. PAH/BC ratios are relatively high and correlation between levels of total PAHs and BC is almost inexistent in Lake Thun, probably due to the presence of less condensed forms of the BC spectrum (char BC) that is underestimated with the chemothermal oxidation method applied in this study. The sediment profiles of TOC, BC, and PAHs are noticeably different in the mountain lakes located around 2000 m a.s.l. In Lake Engstlen, the PAH/BC ratios, as well as the correlation between PAHs and BC, point towards appreciable amounts of predominantly light soot particles. Light soot particles have higher mobility and can, therefore, be efficiently transported to this remote site. The proglacial Lake Oberaar is shown to be a receptor of BC and PAHs released by the fast melting adjacent glacier acting as a secondary source for these conservative species temporarily stored in the glacier ice. Finally, Lake Stein is in strong contrast to all other lakes. High flux of BC into Lake Stein, combined with constant temporal evolutions of BC and PAHs, and in particular BC/TOC ratios approaching 100% are all strong indications for a geogenic presence of graphite in its catchment area.     

Assessment of the functionality of a pilot-scale reactor and its potential for electrochemical degradation of calmagite, a sulfonated azo-dye

Electrochemical degradation (ECD) is a promising technology for in situ remediation of diversely contaminated environmental matrices by application of a low level electric potential gradient. This investigation, prompted by successful bench-scale ECD of trichloroethylene, involved development, parametric characterization and evaluation of a pilot-scale electrochemical reactor for degradation of calmagite, a sulfonated azo-dye used as a model contaminant. The reactor has two chambers filled with granulated graphite for electrodes. The system has electrical potential, current, conductivity, pH, temperature, water-level and flow sensors for automated monitoring. The reactor supports outdoor and fail-safe venting, argon purging, temperature regulation and auto-shutdown for safety. Treatment involves recirculating the contaminated solution through the electrode beds at small flow velocities mimicking low fluid-flux in groundwater and submarine sediments. The first phase of the investigation involved testing of the reactor components, its parametric probes and the automated data acquisition system for performance as designed. The results showed hydraulic stability, consistent pH behavior, marginal temperature rise (<5 degrees C) and overall safe and predictable performance under diverse conditions. Near complete removal of calmagite was seen at 3-10V of applied voltage in 8-10h. The effects of voltage and strength of electrolyte on degradation kinetics have been presented. Further, it was observed from the absorption spectra that as calmagite degrades over time, new peaks appear. These peaks were associated with degradation products identified using electrospray ionization mass spectrometry. A reaction mechanism for ECD of calmagite has also been proposed.     

Removal of congo red from aqueous solution by bagasse fly ash and activated carbon: kinetic study and equilibrium isotherm analyses

Present investigation deals with the utilisation of bagasse fly ash (BFA) (generated as a waste material from bagasse fired boilers) and the use of activated carbons-commercial grade (ACC) and laboratory grade (ACL), as adsorbents for the removal of congo red (CR) from aqueous solutions. Batch studies were conducted to evaluate the adsorption capacity of BFA, ACC and ACL and the effects of initial pH (pH(0)), contact time and initial dye concentration on adsorption. The pH(0) of the dye solution strongly affected the chemistry of both the dye molecules and BFA in an aqueous solution. The effective pH(0) was 7.0 for adsorption on BFA. Kinetic studies showed that the adsorption of CR on all the adsorbents was a gradual process. Equilibrium reached in about 4h contact time. Optimum BFA, ACC and ACL dosages were found to be 1, 20 and 2 g l(-1), respectively. CR uptake by the adsorbents followed pseudo-second-order kinetics. Equilibrium isotherms for the adsorption of CR on BFA, ACC and ACL were analysed by the Freundlich, Langmuir, Redlich-Peterson, and Temkin isotherm equations. Error analysis showed that the R-P isotherm best-fits the CR adsorption isotherm data on all adsorbents. The Freundlich isotherm also shows comparable fit. Thermodynamics showed that the adsorption of CR on BFA was most favourable in comparison to activated carbons.