Use of beryllium-7 to document soil redistribution following forest harvest operations

Rapid and reliable methods for documenting soil erosion associated with forest harvest operations are needed to support the development of best management practices for soil and water conservation. To address this need, the potential for using 7Be measurements to estimate patterns and amounts of soil redistribution associated with individual post-harvest events was explored. The 7Be technique, which was originally developed for use on agricultural land, was employed to estimate soil redistribution associated with a period of heavy rainfall within a harvested forest area located in the Lake Region of Chile (39 degrees 44'7' S, 73 degrees 10'39' W; 22% slope; and mean annual rainfall 2300 mm yr(-1)). The results provided by the 7Be technique were validated against direct measurements of soil gain or loss during the same period obtained using erosion pins. The information produced by the two approaches was similar. The results of this study demonstrate the potential for using 7Be measurements to document event-based erosion in recently harvested forest areas.     

Choosing policy instruments for controlling ozone depleting substances in a developing context: the case of Chile

Chile ratified the Montreal Protocol in 1990 which sets out an agenda for the reduction and then elimination of ozone depleting substances (ODS); however, by 1998 the country had not yet defined a strategy to encourage greater compliance, so that in the same year the National Environmental Commission decided to examine the policy options available. This paper examines the process followed to develop this strategy. As a first step it was necessary to look at how far the implicit policy of "business as usual" could be stretched without jeopardizing Chile's compliance obligations. A second step included quantifying compliance costs and their impact on different policy instruments and so policy choice. Finally, the attitudes of decision-makers or participants were identified, by interviews with officials of the different public agents involved, in order to weigh their views about policy. A strategy was proposed, based on this information, which the Chilean regulator has used, although not in its entirety. The methodology developed could well be useful for developing-country Protocol signatories building their own appropriate compliance strategy.     

Correction to: Keeping pace with forestry: Multi-scale conservation in a changing production forest matrix

Ambio - In the original published article, the sentence “Nevertheless, semi-natural forest remnants continue to be harvested and fragmented (Svensson et al. 2018; Jonsson et al. 2019), and...     

Ultrafine particles at workplaces of a primary aluminium smelter

The number concentration and size distribution of ultrafine particles in a S?derberg and a prebake potroom of an aluminium primary smelter have been measured using a scanning mobility particle spectrometer. The particle morphology was studied by transmission electron microscopy (TEM). The study shows the existence of elevated number concentrations of ultrafine particles in both potrooms. The main source of these particles is likely to be the process of anode changing. The ultrafine particles were measured directly at the source but could also be identified as episodes of high number concentrations in the general background air. Unlike the larger particles belonging to the 50-100 nm mode, the nanoparticle mode could not be detected in the TEM indicating that they may not be stable under the applied sampling conditions and/or the high vacuum in the instrument.     

Bioaerosol sampling by a personal rotating cup sampler CIP 10-M

High concentrations of bioaerosols containing bacterial, fungal and biotoxinic matter are encountered in many workplaces, e.g. solid waste treatment plants, waste water treatment plants and sewage networks. A personal bioaerosol sampler, the CIP 10-M (M-microbiologic), has been developed to measure worker exposure to airborne biological agents. This sampler is battery operated; it is light and easy to wear and offers full work shift autonomy. It can sample much higher concentrations than biological impactors and limits the mechanical stress on the microorganisms. Biological particles are collected in 2 ml of liquid medium inside a rotating cup fitted with radial vanes to maintain an air flow rate of 10 l min(-1) at a rotational speed of approximately 7,000 rpm. The rotating cup is made of sterilisable material. The sampled particles follow a helicoidal trajectory as they are pushed to the surface of the liquid by centrifugal force, which creates a thin vertical liquid layer. Sterile water or another collecting liquid can be used. Three particle size selectors allow health-related aerosol fractions to be sampled according to international conventions. The sampled microbiological particles can be easily recovered for counting, incubation or further biochemical analysis, e.g., for airborne endotoxins. Its physical sampling efficiency was laboratory tested and field trials were carried out in industrial waste management conditions. The results indicate satisfactory collection efficiency, whilst experimental application has demonstrated the usefulness of the CIP 10-M personal sampler for individual bioaerosol exposure monitoring.     

Socio-environmental consideration of phosphorus flows in the urban sanitation chain of contrasting cities

Understanding how cities can transform organic waste into a valuable resource is critical to urban sustainability. The capture and recycling of phosphorus (P), and other essential nutrients, from human excreta is particularly important as an alternative organic fertilizer source for agriculture. However, the complex set of socio-environmental factors influencing urban human excreta management is not yet sufficiently integrated into sustainable P research. Here, we synthesize information about the pathways P can take through urban sanitation systems along with barriers and facilitators to P recycling across cities. We examine five case study cities by using a sanitation chains approach: Accra, Ghana; Buenos Aires, Argentina; Beijing, China; Baltimore, USA; and London, England. Our cross-city comparison shows that London and Baltimore recycle a larger percentage of P from human excreta back to agricultural lands than other cities, and that there is a large diversity in socio-environmental factors that affect the patterns of recycling observed across cities. Our research highlights conditions that may be “necessary but not sufficient” for P recycling, including access to capital resources. Path dependencies of large sanitation infrastructure investments in the Global North contrast with rapidly urbanizing cities in the Global South, which present opportunities for alternative sanitation development pathways. Understanding such city-specific social and environmental barriers to P recycling options could help address multiple interacting societal objectives related to sanitation and provide options for satisfying global agricultural nutrient demand.

     

Trees on the move: using decision theory to compensate for climate change at the regional scale in forest social-ecological systems

Regional Environmental Change - The adaptation of social-ecological systems such as managed forests depends largely on decisions taken by forest managers who must choose among a wide range of...     

From vineyards to feedlots: a fund-flow scanning of sociometabolic transition in the Vallès County (Catalonia) 1860–1956–1999

Regional Environmental Change - We analyse the changes to agricultural metabolism in four municipalities of Vallès County (Catalonia, Iberia) by accounting for their agroecosystem funds and...     

Environmental pollution in Africa

Mining and minerals industries are fast-growing, but at the same time, they have gained more attention due to their impacts over the environment and society. This research aims to provide new insights into the topic of perception and awareness toward sustainability in industrial mining in Brazil. The work included in-depth interviews with a set of companies’ managers/directors focusing in particular on aspects related to the social and environmental dimensions, including communication and relationship with the community, impact assessment and mitigation strategies. The knowledge and use of for formal indicators was also evaluated and analyzed through the proposed Model for Sustainability Assessment of Mining (SAoM model), which was applied to all participating companies. The results put in evidence the existing gap between large and small companies, with these last ones showing lower awareness for the impacts of their activities. The lack of community engagement and of local stakeholders’ involvement, as well as the disregard for actions to mitigate their environmental and social impacts, is the main challenges to be overcome by this sector. The sector has then a long path to go toward sustainability and an active involvement of public institutions is required to allow for its development without compromising locals welfare.     

Bird on the wire: Landscape planning considering costs and benefits for bird populations coexisting with power lines

Power-line grids are increasingly expanding worldwide, as well as their negative impacts on avifauna, namely the direct mortality through collision and electrocution, the reduction of breeding performance, and the barrier effect. On the other hand, some bird species can apparently benefit from the presence of power lines, for example perching for hunting purposes or nesting on electricity towers. In this perspective essay, we reviewed the scientific literature on both costs and benefits for avifauna coexisting with power lines. Overall, we detected a generalized lack of studies focusing on these costs or benefits at a population level. We suggest that a switch in research approach to a larger spatio-temporal scale would greatly improve our knowledge about the actual effects of power lines on bird populations. This research approach would facilitate suitable landscape planning encompassing both mitigation of costs and promotion of benefits for bird populations coexisting with power lines. For example, the strategic route planning of electricity infrastructures would limit collision risk or barrier effects for threatened bird populations. Concurrently, this strategic route planning would promote the range expansion of threatened populations of other bird species, by providing nesting structures in treeless but potentially suitable landscapes. We suggest establishing a collaborative dialogue among the scientific community, governments, and electricity companies, with the aim to produce a win–win scenario in which both biodiversity conservation and infrastructure development are integrated in a common strategy.