Impact of wastewater treatment plants on receiving surface waters and a tentative risk evaluation: the case of estrogens and beta blockers

Five estrogenic hormones (unconjugated?+?conjugated fractions) and 10 beta blockers were analyzed in three wastewater treatment plant (WWTP) effluents and receiving river waters in the area of Lyon, France. In the different samples, only two estrogens were quantified: estrone and estriol. Some beta blockers, such as atenolol, acebutolol, and sotalol, were almost always quantified, but others, e.g., betaxolol, nadolol, and oxprenolol were rarely quantified. Concentrations measured in river waters were in the nanogram per liter range for estrogens and between 0.3 and 210 ng/L for beta blockers depending on the substance and the distance from the WWTP outfall. The impact of the WWTP on the receiving rivers was studied and showed a clear increase in concentrations near the WWTP outfall. For estrogens, the persistence in surface waters was not evaluated given the low concentrations levels (around 1 ng/L). For beta blockers, concentrations measured downstream of the WWTP outfall were up to 16 times higher than those measured upstream. Also, the persistence of metoprolol, nadolol, and propranolol was noted even 2 km downstream of the WWTP outfall. The comparison of beta blocker fingerprints in the samples collected in effluent and in the river also showed the impact of WWTP outfall on surface waters. Finally, a tentative environmental risk evaluation was performed on 15 sites by calculating the ratio of receiving water concentrations to predicted non-effect concentrations (PNEC). For estrogens, a total PNEC of 5 ng/L was considered and these substances were not linked to any potential environmental risk (only one site showed an environmental risk ratio above 1). Unfortunately, few PNECs are available and risk evaluation was only possible for 4 of the 10 beta blockers studied: acebutolol, atenolol, metoprolol, and propranolol. Only propranolol presented a ratio near or above 1, showing a possible environmental risk for 4 receiving waters out of 15.     

High throughput and miniaturised systems for biodegradability assessments

The society demands safer products with a better ecological profile. Regulatory criteria have been developed to prevent risks for human health and the environment, for example, within the framework of the European regulation REACH (Regulation (EC) No 1907, 2006). This has driven industry to consider the development of high throughput screening methodologies for assessing chemical biodegradability. These new screening methodologies must be scalable for miniaturisation, reproducible and as reliable as existing procedures for enhanced biodegradability assessment. Here, we evaluate two alternative systems that can be scaled for high throughput screening and conveniently miniaturised to limit costs in comparison with traditional testing. These systems are based on two dyes as follows: an invasive fluorescent dyes that serves as a cellular activity marker (a resazurin-like dye reagent) and a noninvasive fluorescent oxygen optosensor dye (an optical sensor). The advantages and limitations of these platforms for biodegradability assessment are presented. Our results confirm the feasibility of these systems for evaluating and screening chemicals for ready biodegradability. The optosensor is a miniaturised version of a component already used in traditional ready biodegradability testing, whereas the resazurin dye offers an interesting new screening mechanism for chemical concentrations greater than 10 mg/l that are not amenable to traditional closed bottle tests. The use of these approaches allows generalisation of high throughput screening methodologies to meet the need of developing new compounds with a favourable ecological profile and also assessment for regulatory purpose.     

Occurrence of PCDD/Fs and dioxin-like PCBs in superficial sediment of Portuguese estuaries

Superficial sediments collected from seven estuarine systems located along the Portuguese coast were analyzed for 7 polychlorinated dibenzo-p-dioxins (PCDDs), 10 polychlorinated dibenzofurans (PCDFs), and 12 dioxin-like polychlorinated biphenyls (dl-PCBs). Total PCDD/F concentration ranged from 4.6 to 464 pg g^?1 dry weight (dw), while that of dl-PCBs varied from 26.6 to 8,693 pg g^?1 dw. In general, the highest PCDD/F and dl-PCB concentrations were associated with densely populated and industrially impacted areas. Additionally, PCDD/F revealed a predominance of octachlorodibenzodioxin (OCDD) to total PCDD/Fs, while PCB 118 was the major contributor to total dl-PCBs. This study provided a global perspective of the contamination status of Portuguese estuaries by dioxin-like compounds and allowed a comparison between the investigated systems and other systems worldwide. PCDD/F and dl-PCB levels found in the collected sediments were lower than those of highly impacted areas from different parts of the globe. Nevertheless, comparison with guidelines and quality standards from other countries indicated that some Portuguese estuarine areas with a high industrialization level present PCDD/F and dl-PCB concentrations in superficial sediment that may constitute a risk to aquatic organisms.     

The release of lindane from contaminated building materials

The release of the organochlorine pesticide lindane (γ-hexachlorocyclohexane) from several types of contaminated building materials was studied to assess inhalation hazard and decontamination requirements in response to accidental and/or intentional spills. The materials included glass, polypropylene carpet, latex-painted drywall, ceramic tiles, vinyl floor tiles, and gypsum ceiling tiles. For each surface concentration, an equilibrium concentration was determined in the vapour phase of the surrounding air. Vapor concentrations depended upon initial surface concentration, temperature, and type of building material. A time-weighted average (TWA) concentration in the air was used to quantify the health risk associated with the inhalation of lindane vapors. Transformation products of lindane, namely α-hexachlorocyclohexane and pentachlorocyclohexene, were detected in the vapour phase at both temperatures and for all of the test materials. Their formation was greater on glass and ceramic tiles, compared to other building materials. An empiric Sips isotherm model was employed to approximate experimental results and to estimate the release of lindane and its transformation products. This helped determine the extent of decontamination required to reduce the surface concentrations of lindane to the levels corresponding to vapor concentrations below TWA.     

Spatial modeling of factor analysis scores

The use of mosses as biomonitors operates as an indicator of their concentration in the environment, becoming a methodology which provides a significant interpretation in terms of environmental quality. The different types of pollution are variables that can not be measured directly in the environment - latent variables. Therefore, we propose the use of factor analysis to estimate these variables in order to use them for spatial modelling. On the contrary, the main aim of the commonly used principal components analysis method is to explain the variability of observed variables and it does not permit to explicitly identify the different types of environmental contamination. We propose to model the concentration of each heavy metal as a linear combination of its main sources of pollution, similar to the case of multiple regression where these latent variables are identified as covariates, though these not being observed. Moreover, through the use of geostatistical methodologies, we suggest to obtain maps of predicted values for the different sources of pollution. With this, we summarize the information acquired from the concentration measurements of the various heavy metals, and make possible to easily determine the locations that suffer from a particular source of pollution.     

Perception of the effects of climate change in winter and summer tourist areas: the Pyrenees and the Catalan and Balearic coasts,Spain

In this study, we compare the perception of climate change in two different tourist settings of northeastern Spain: the Catalan Pyrenees and the Catalan Mediterranean coast and the Balearic Islands. We carried out a survey of 906 cases (506 in the coastal areas of Catalonia and the Balearic Islands and 400 in the Catalan Pyrenees) asking residents on those areas to assess the possible effects of climate change on tourist-related activities. While the existence of climate change and of its estimated impacts is widely accepted, we observe statistically significant differences in most of the questions between residents in the coastal areas and residents in the Pyrenees. In general terms, respondents from the Pyrenees display a much higher concern regarding the economic impacts of climate change on tourism. On the other hand, the results also show that some demographic groups, such as women, members of large households, or unemployed, tend to present higher levels of concern. This study may give new hints on which tourist modalities and which groups are more concerned for the impacts of climate change in Mediterranean tourist environments and could translate into more targeted adaptive and mitigation practices.     

An assessment of the metabolic profile implied by agricultural change in two rural communities in the North of Argentina

The soy expansion model in Argentina generates structural changes in traditional lifestyles, which can be associated with different biophysical and socioeconomic impacts. To explore this issue, we apply an innovative method for integrated assessment—the multi-scale integrated analysis of societal and ecosystem metabolism framework—to characterize two communities in the Chaco Region, Province of Formosa, North of Argentina. These communities have recently experienced the expansion of soy production, altering their economic activity, energy consumption patterns, land use and human time allocation. The integrated characterization presented in the paper illustrates the differences (biophysical, socioeconomic and historical) between the two communities that can be associated with different responses. The analysis of the factors behind these differences has important policy implications for the sustainable development of local communities in the area.     

Multi-scale land cover dynamics of semiarid scrubland in Baja California,Mexico

Land use and cover changes trigger multi-factorial responses with tangible and intangible effects. Driving forces governing changes are scale-, place- and time-dependent; because of their complexity, a multi-scalar analysis is required to determine conjoint causation. Studies using multi-scalar approach in semiarid scrubland ecosystems are scanty. This paper investigates land use changes on the largest semiarid scrubland ecosystem of Mexico, the Baja California Peninsula, using a multi-scalar analysis approach. It further provides insight into the likely underlying causes for land use trends. Multi-temporal databases were compiled for 1978, 1990, 2000 and 2003 from various sources; population was projected for the same years. Land cover processes were validated through intensive fieldwork. Map overlapping with the aid of geographic information systems allowed computation of land cover transformation rates. New algorithms were developed to better understand land cover trends. Multi-variate analysis was also performed to provide a synthetic statistical overview. Results showed that land cover change occurred at different times, at variable scales, due to distinct drivers. As a consequence, the current regional scenario has been shaped by distinguishable socio-economic changes. The semiarid scrubland ecosystems in the Baja California Peninsula experienced contrasting trends detectable only at site and local scales. Regionally, the replacement of original vegetation (scrubland) for other land cover category is following trends similar to those in the rest of Mexico and most semiarid ecosystems worldwide. These findings support the hypothesis that land use and cover changes must be analyzed at different times and scales to deeply understand underlying forces.     

The relationship among biodiversity,governance, wealth,and scientific capacity at a country level: Disaggregation and prioritization

At a global level, the relationship between biodiversity importance and capacity to manage it is often assumed to be negative, without much differentiation among the more than 200 countries and territories of the world. We examine this relationship using a database including terrestrial biodiversity, wealth and governance indicators for most countries. From these, principal components analysis was used to construct aggregated indicators at global and regional scales. Wealth, governance, and scientific capacity represent different skills and abilities in relation to biodiversity importance. Our results show that the relationship between biodiversity and the different factors is not simple: in most regions wealth and capacity varies positively with biodiversity, while governance vary negatively with biodiversity. However, these trends, to a certain extent, are concentrated in certain groups of nations and outlier countries. We discuss our results in the context of collaboration and joint efforts among biodiversity-rich countries and foreign agencies.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-014-0581-0) contains supplementary material, which is available to authorized users.