Pollenkörner,Punktverteilungen auf der Kugel und Informationstheorie

The Science of Nature -     

Schwermetalle in Regenwürmern Baden-Württembergs

Goal and Scope

Since 1984 the Environmental Protection Agency (LfU) of the State of Baden-Wuerttemberg has been investigating the heavy metal burden of earthworms from representative long-term forest observation plots. These investigations are aimed at elucidating and assessing adverse effects of pollutants on the soil biocenosis.

Methods

At first only lead and cadmium were measured in the worms; in repetitive measurements over the years further metals or metalloid elements such as aluminum, arsenic, chromium, cobalt, copper, manganese, mercury, nickel, thallium, vanadium, and zinc were added to the agenda.

Results and Conclusion

The frequency distribution of the metals in the earthworms was characterized statistically. For the first time state-wide background values, normal values and threshold values were established for all the elements measured. A comparable study with a similar range of parameters is known neither nationally nor internationally. Time trend studies have been available for lead and cadmium since 1985/86, and for zinc since 1987. The studies show a steady decrease of the heavy metals on a state-wide average and especially in the ‘Odenwald’ and ‘Black Forest’ hills with their formerly highly polluted earthworm habitats. Today, the level of these metals in the earthworms is low with few exceptions. This holds true for other heavy metals as well.

Recommendations and Perspectives

The state-wide decreasing very low heavy metal burden of forest observation plots far from known emission sources can be considered a success of air pollution abatement measures. Because of the ongoing atmospheric deposition of heavy metals, regular observation should continue in order to estimate time trends and to recommend the reduction of emissions when precautionary values (part 2) are exceeded.     

Metal accumulation in intertidal litter through decomposing leaf blades, sheaths and stems of Phragmites australis

Metal contents of decomposing leaf blades, leaf sheaths and stems of common reed (Phragmites australis) were monitored by a litter bag method on the sediment of an intertidal brackish marsh in the Scheldt estuary (The Netherlands). On monthly intervals, two litter bags were retrieved from the marsh during 9 months for both leaf blades and sheaths and during 16 months for stems. All samples were dried, weighed and analysed for ash and Cd, Cu, Cr, Ni, Pb and Zn contents. Most concentrations increased considerably during the decomposition. Generally, also a very important net metal inflow into the litter bags could be observed. The inflow was highest for leaf blades. High correlations between ash contents and metal concentrations for leaf blades suggest that the increase of leaf blade metal contents can be due to physicochemical sorption of dissolved metals and an important infiltration of mud particles, which were not removed by rinsing the leaf blades with distilled water preceding the analyses. For stems, smaller amounts of inflowing ash and even outflowing ash amounts were found, which suggests that inflow of inorganic particles is not the major factor determining metal accumulation by stems on medium term. Ergosterol concentrations in stem tissue however proved to be correlated with metal contents, which suggests a significant role of fungal litter colonizers in metal accumulation. For leaf sheaths, the effects of physicochemical sorption, infiltration of mud particles and incorporation by microbial litter colonizers do not seem to be as pronounced as for stems and leaf blades.     

A multi-objective optimization framework for surfactant-enhanced remediation of DNAPL contaminations

The occurrence of Dense Non-Aqueous Phase Liquid (DNAPL) contaminations in the subsurface is a threat for drinkwater resources in the western world. Surfactant-Enhanced Aquifer Remediation (SEAR) is widely considered as one of the most promising techniques to remediate DNAPL contaminations in-situ, be it with considerable additional costs compared to classical pump-and-treat remediations. A cost-effective design of the remediation set-up is therefore essential. In this work, a pilot SEAR test is executed at a DNAPL contaminated site in Belgium in order to collect data for the calibration of a multi-phase multi-component model. The calibrated model is used to assess a series of scenario-analyses for the full-scale remediation of the site. The remediation variables that were varied were the injection and extraction rate, the injection and extraction duration, and the surfactant injection concentrations. A constrained multi-objective optimization of the model was applied to obtain a Pareto set of optimal remediation strategies with different weights for the two objectives of the remediation: (i) the maximal removal of DNAPL and (ii) a total minimal cost. These Pareto curves can help decision makers to select an optimal remediation strategy in terms of cost and remediation efficiency. The Pareto front shows a considerable trade-off between the total remediation cost and the removed DNAPL mass.     

Organohalogenated pollutants in human serum from Iassy, Romania and their relation with age and gender

Human serum samples (n=142) from Iassy county (Eastern Romania) collected in 2005 were analyzed for p,p'-DDT and its metabolites, hexachlorobenzene, hexachlorocyclohexane (HCH) isomers, chlordane and metabolites and 14 polychlorinated biphenyl (PCB) congeners. In all samples, p,p'-DDE (principal metabolite of p,p'-DDT) and beta-HCH (most persistent HCH isomer) were the most abundant organochlorine pesticides (OCPs) with median concentrations of 1975 and 923 ng/g lipid weight (lw), respectively. Hexachlorobenzene and p,p'-DDT were also detected in all samples, but at a lower median concentration of 30 and 340 ng/g lw, respectively. The large variation of the ratio p,p'-DDT/p,p'-DDE (range between 0.02 and 0.80) suggests various degrees of exposure to DDT, including recent exposure, at least to some subgroups of the population. Chlordane and its metabolites were in most cases close to the limit of quantification suggesting a very low use of chlordane formulations in Eastern Romania. Unexpectedly, PCBs were present in all samples at sometimes considerable levels (up to 4970 ng/g lw for sum of 14 PCB congeners) indicating a higher exposure of the Romanian population than previously reported. The PCB profile consisted of persistent congeners such as 138, 153, 170 and 180 which contributed for approximately 75% to the sum PCBs. Concentrations of most pollutants correlated significantly with age (r>0.86, p<0.01). Except for p,p'-DDT and gamma-HCH, the mean levels of OCPs in females were statistically higher than in males, while, except for octa-CBs, no gender differences were found for PCBs. Levels of p,p'-DDE, penta-CBs, hexa-CBs and hepta-CBs were significantly higher in individuals with a rural main residence. In a pooled serum sample, 6 polybrominated diphenyl ether (PBDE) congeners were measured at a level of 1.04 ng/g lw. Compared to results available from Central and Eastern European countries, human serum samples from Romania contained higher levels of contamination. This emphasizes that an extensive and rigorous program for the monitoring of OCPs and PCBs in Romanian population is highly needed in the light of possible adverse health effects acknowledged for these pollutants.     

How do transformational leaders foster positive employee outcomes? A self‐determination‐based analysis of employees' needs as mediating links

Although followers' needs are a central aspect of transformational leadership theory, little is known about their role as mediating mechanisms for this leadership style. The present research thus seeks to integrate and extend theorizing on transformational leadership and self‐determination. In particular, we propose that the satisfaction of followers' basic needs (autonomy, competence, and relatedness) mediates the relationship between transformational leadership and employee outcomes (job satisfaction, self‐efficacy, and commitment to the leader). We tested this model in two studies involving employees from a broad spectrum of organizations in Germany (N = 410) and in Switzerland (N = 442). Results revealed largely consistent patterns across both studies. The need for competence fulfillment solely mediated the link between transformational leadership and occupational self‐efficacy; the need for relatedness fulfillment solely mediated the link between transformational leadership and commitment to the leader. The mediating pattern for the link between transformational leadership and job satisfaction varied slightly across studies. In Study 1, only the need for autonomy fulfillment was a significant mediator, whereas in Study 2, all three needs mediated this relationship. Taken together, our study integrates theorizing on transformational leadership and self‐determination by corroborating that need fulfillment indeed is a central mechanism behind transformational leadership. Copyright © 2012 John Wiley & Sons, Ltd.