Estuarine circulation in the Taranto Seas

The Taranto basin is a shallow water marine system in the South of Italy characterized by the presence of a lagoon environment together with a semi-enclosed bay connected to the Ionian Sea. This marine system experienced over the last few decades strong biochemical pollution and environmental degradation, and it is considered a hotspot study site for economic, ecological and scientific reasons. The aim of this study was to examine, on an annual temporal scale and with high spatial resolution, the main hydrodynamical processes and transport scales of the system by means of a 3D finite element numerical model application, adopting the most realistic forcing available. The model allowed us to assess the role played by baroclinic terms in the basin circulation, describing its estuarine nature. In particular, the main features of water circulation, salinity and temperature distribution, water renewal time and bottom stress were investigated. Our results allowed us to equate this system dynamic to that of a weakly stratified estuary, identifying the main driving sources of this mechanism. The vertical stratification over the whole year was proved to be stable, leading to a dual circulation flowing out on the surface, mainly through Porta Napoli channel, and inflowing on the bottom mainly through Navigabile channel. This process was responsible also for the renewal time faster on the bottom of the Mar Piccolo basin than the surface. Due to the great importance of the Taranto basin for what concerns sediment pollution, also the effect of currents in terms of bottom stress was investigated, leading to the conclusion that only in the inlets area the values of bottom stress can be high enough to cause erosion.     

The application of regenerable sorbents for mercury capture in gas phase

Mercury is a well-known toxic element, and flue gas streams emitted from coal-fired utilities are one of the largest anthropogenic sources of this element. This study briefly reviews the proposed technologies for reducing mercury emissions from coal combustion, focusing on an emerging process which involves the use of regenerable sorbents and especially those loaded with noble metals. Among the mercury species formed during coal combustion, elemental mercury is the most difficult to remove from the flue gases due to its low reactivity and insolubility in water. The widespread interest in using regenerable sorbents with metals is due to their ability to retain elemental mercury. With this technology, not only can efficiencies of 100 % be reached in the retention of elemental mercury but also a way to avoid the generation of new wastes loaded with mercury. This study considers the main aspects that must be taken into account when developing effective regenerable sorbents for mercury capture, with special attention to sorbents containing noble metals. The characteristics of this process are compared with those of other processes in a more advanced state of development.     

Enhanced science–stakeholder communication to improve ecosystem model performances for climate change impact assessments

In recent years, climate impact assessments of relevance to the agricultural and forestry sectors have received considerable attention. Current ecosystem models commonly capture the effect of a warmer climate on biomass production, but they rarely sufficiently capture potential losses caused by pests, pathogens and extreme weather events. In addition, alternative management regimes may not be integrated in the models. A way to improve the quality of climate impact assessments is to increase the science–stakeholder collaboration, and in a two-way dialog link empirical experience and impact modelling with policy and strategies for sustainable management. In this paper we give a brief overview of different ecosystem modelling methods, discuss how to include ecological and management aspects, and highlight the importance of science–stakeholder communication. By this, we hope to stimulate a discussion among the science–stakeholder communities on how to quantify the potential for climate change adaptation by improving the realism in the models.     

A method to estimate the impact of clear-cutting on nutrient concentrations in boreal headwater streams

Large-scale forestry operations, like clear-cutting, may impair surface water quality if not done with environmental considerations in mind. Catchment and country level estimates of nutrient loads from forestry are generally based on specific export values, i.e., changes in annual exports due to the implemented forestry operations expressed in kg ha⁻¹. We introduce here a specific concentration approach as a method to estimate the impact of clear-cutting on nutrient concentrations and export in headwater streams. This new method is potentially a more dynamic and flexible tool to estimate nutrient loads caused by forestry, because variation in annual runoff can be taken into account in load assessments. We combined water quality data from eight boreal headwater catchment pairs located in Finland and Sweden, where the effect of clear-cutting on stream water quality has been studied experimentally. Statistically significant specific concentration values could be produced for total nitrogen, nitrate, ammonium, and phosphate. The significant increases in the concentrations of these nutrients occurred between 2 and 6 years after clear-cutting. Significant specific concentration values could not be produced for total phosphorus and total organic carbon with the whole dataset, although in some single studies significant increases in their concentrations after clear-cutting were observed. The presented method enables taking into account variation in runoff, temporal dynamics of effects, and the proportional size of the treated area in load calculations. The number of existing studies considering large site-specific variation in responses to clear-cutting is small, and therefore further empirical studies are needed to improve predictive capabilities of the specific concentration values.     

The health risk assessment of organochlorine pesticides in smoked fish products available in Szczecin,Poland

The aim of this study was to determine the concentration of organochlorine pesticides [HCH and isomers (α, β, γ), aldrin, dieldrin, endrin, heptachlor and heptachlor epoxide and DDT and its metabolites (op’-DDD, pp’-DDD, op’-DDT, pp’-DDE, pp’-DDT] in smoked fish. Analysis was made of 12 typical smoked fish products that are the most popular among customers from the city of Szczecin, Poland. Pesticide residues were found in all samples of smoked fish. The smoked sprat and cold-smoked Baltic salmon were the most contaminated smoked fish products in terms of chlorine pesticides. The sum of DDT metabolites ranged from 1.48 (smoked mackerel) to 35.53 ng/g wet weight (smoked sprat), with the lowest concentrations found for op’-DDT and the highest for pp’-DDE. The level of heptachlor epoxide isomer B was low and ranged from 0.06 ± 0.01 (smoked eel) to 0.27 ± 0.07 ng/g w.w. (smoked sprat). The content of heptachlor was 0.48–1.99 ng/g w.w. Concentration of endrin was higher compared to other pesticides, ranged from 1.50 (cold-smoked salmon fillet) to 16.84 ng/g w.w (hot-smoked warehou). The contamination of smoked products was significantly low and poses no risk to the health of consumers provided that they eat a diverse diet. The concentration of organochlorine pesticides in the analysed products was below the standards accepted in European countries.     

Development of a test method against hot alkaline chemical splashes.

High temperature alkaline chemical liquids have caused injuries and hazardous situations in Finnish pulp manufacturing mills. There are no requirements and/or test method standards concerning protection against high temperature alkaline chemical splashes. This paper describes the test method development process to test and identify materials appropriate for hot liquid chemical hazard protection. In the first phase, the liquid was spilled through a stainless steel funnel and the protection performance was evaluated using a polyvinyl chloride (PVC) film under the test material. After several tentative improvements, a graphite crucible was used for heating and spilling the chemical, and a copper-coated K-type thermometer with 4 independent measuring areas was designed to measure the temperature under the material samples. The thermometer was designed to respond quickly so that peak temperatures could be measured. The main problem was to keep the spilled amount of chemical constant, which unfortunately resulted in significant variability in data.     

Heart rate variability and motion sickness during forklift simulator driving

The goal of the study was to determine the effect of a 1-h hour long forklift truck virtual simulator driving on the mechanism of autonomic heart rate (HR) regulation in operators. The participants were divided into 2 subgroups: subjects with no definite inclination to motion sickness (group A) and subjects with a definite inclination to motion sickness (group B). Holter monitoring of electrocardiogram (ECG) signal was carried out in all subjects during the virtual simulator driving. For 12 consecutive epochs of ECG signal, HR variability analysis was conducted in time and frequency domains. In subjects with a definite inclination to motion sickness after ~30 min of the driving, changes in parameter values were found indicating an increase in sympathetic and parasympathetic activity with parasympathetic dominance.     

New approach to calculate the probability of ignition

The probabilistic approach to the evaluation of fire hazard and the effectiveness of fire-precaution measures enables a rational response to the randomness of fire outbreaks. This article employs the statistical analysis methods to elucidate the causes for the ignition of fire on a random sample of industrial buildings in the Republic of Slovenia. The analyses are based on the Structural Equation Modeling (SEM), which is a well established and important statistical analysis technique in the fields of social science, biology, psychology and medicine, but hitherto rarely applied in safety research. The results of the study demonstrate that for the analyzed random sample of industrial buildings the frequency of fire outbreaks statistically significantly depends only on the presence and the probability of exposure to the heat sources (flames, sparks, and hot surfaces), but does not significantly depend on the available quantity of flammable materials within the industrial structure.     

Research on simultaneous impact of hand-arm and whole-body vibration

This article presents the results of laboratory tests on the combined effect of whole-body vibration (WBV) and hand-arm vibration (HAV). The reactions of subjects exposed to various combinations of vibration were recorded. The vibrotactile perception threshold (VPT) test identified changes caused by exposure to vibration. Ten male subjects met the criteria of the study. There were 4 series of tests: a reference test and tests after exposure to HAV, WBV, and after simultaneous exposure to HAV and WBV. An analysis of the results (6000 ascending and descending VPTs) showed that the changes in VPTs were greatest after simultaneous exposure to both kinds of vibration. The increase in VPT, for all stimulus frequencies, was then higher than after exposure to HAV or WBV only.     

Soil moisture determines the effectiveness of two urease inhibitors to decrease N<Subscript>2</Subscript>O emission

Among the mitigation strategies to prevent nitrogen (N) losses from ureic fertilizers, urease inhibitors (UIs) have been demonstrated to promote high N use efficiency by reducing ammonia (NH₃) volatilization. In the last few years, some field experiments have also shown its effectiveness in reducing nitrous oxide (N₂O) losses from fertilized soils under conditions of low soil moisture. An incubation experiment was carried out with the aim of assessing the main biotic mechanisms behind N₂O emissions once that the UIs N-(n-butyl) thiophosphoric triamid (NBPT) and phenil phosphorodiamidate (PPDA) were applied with Urea (U) under different soil moisture conditions (40, 60 and 80 % water-filled pore space, WFPS). In the same study we tried to analyze to what extent soil WFPS regulates the effect of these inhibitors on N₂O emissions. The use of PPDA in our study allowed us to compare the effect of NBPT with that of another commercially available urease inhibitor, aiming to see if the results were inhibitor-specific or not. Based on the results from this experiment, a WFPS (i.e. 60 %) was chosen for a second study (i.e. mesocosm experiment) aiming to assess the efficiency of the UIs to indirectly affect N₂O emissions through influencing the pool of soil mineral N. The N₂O emissions at 40 % WFPS were almost negligible, being significantly lower from all fertilized treatments than that produced at 60 and 80 % WFPS. When compared to U alone, NBPT+U reduced the N₂O emissions at 60 % WFPS but had no effect at 80 % WFPS. The application of PPDA significantly increased the emissions with respect to U at 80 % WFPS whereas no significant effect was found at 60 %. At 80 % WFPS, denitrification was the main source of N₂O emissions for all treatments. In the mesocosm study, the application of NBPT+U was an effective strategy to reduce N₂O emissions (75 % reduction compared to U alone), due to a lower soil ammonium (NH₄ ⁺) content induced by the inhibitor. These results suggest that adequate management of the UI NBPT could provide, under certain soil conditions, an opportunity for mitigation of N₂O emissions from fertilized soils.