Pretreatment of cyanided tailings by catalytic ozonation with Mn2+/O3

The increasing amount of cyanided tailings produced as a by-product has gained significant attention in recent years because of the rapid development of the gold industry and extensive exploitation of gold mineral resources. The effective use of these secondary resources is becoming an important and urgent problem for all environmental protection staff. Manganese-catalyzed ozonation for the pre-oxidation of cyanided tailings was studied and the effects of Mn²⁺ dosage, initial sulfuric acid concentration, ozone volume flow, temperature and agitation speed on pretreatment were examined. The optimum reaction conditions were observed to be: ore pulp density 2.5%, agitation speed 700 r/min, temperature 60 ℃, Mn²⁺ dosage 40 g/L, ozone volume flow 80 L/hr, initial sulfuric acid concentration 1 mol/L, and reaction time 6 hr. Under these conditions, the leaching rate of Fe and weight loss could reach 94.85% and 48.89% respectively. The leaching process of cyanided tailings by Mn²⁺/O³ was analyzed, and it was found that the leaching of pyrite depends on synergetic oxidation by high-valent manganese and O³, in which the former played an important part.     

Responses of European eel (Anguilla anguilla L.) circulating phagocytes to an in situ closed pulp mill effluent exposure and its association with organ-specific peroxidative damage

The effect of bleached kraft pulp mill effluent (BKPME) persistent compounds on phagocyte activities and its organ-specific influence in gill, kidney and liver was studied in European eel (Anguilla anguilla L.). Eels were caged and plunged at 3 different sites-50 m (site 1), 100 m (site 2) and 2,000 m (site 3) away from the end of the closed BKPME discharging channel for 8 and 48 h. Gill, head kidney and peritoneum phagocytes oxidative burst activity (OBA) was measured by the nitroblue tetrazolium reduction assay whereas lipid peroxidation (LPO) in eel gill, kidney and liver was measured by thiobarbituric acid reaction. A significant gill OBA induction was found at 8h on site 2, and on sites 1, 2 and 3 at 48 h exposure. However, in head kidney and peritoneal exudate phagocytes, OBA induction was significant only at sites 2 and 3 after 48 h exposure. In those particular sites, a significant increase in gill, kidney and liver LPO was measured that is assumed to result from OBA induction. Considering OBA and LPO, gill is the most affected tissue compared to kidney and liver. Gill vulnerability towards peroxidative damage was demonstrated at 8h on site 2 and at 48 h on sites 1, 2 and 3, whereas in kidney was observed at sites 2 and 3 only at 48 h. Liver LPO increased at site 2 only after 48 h exposure. Our results demonstrate that the OBA activation pattern in gill and kidney is associated with the induced peroxidative damage extent in those organ, together with water pollution the exposure route, resulting from previous BKPME effluent sediment contamination which may affect the activation pattern of circulating fish phagocytes.     

Determination of acaricide residues in saudi arabian honey and beeswax using solid phase extraction and gas chromatography

Determination of acaricide residues of flumethrin, tau-fluvalinate, coumaphos, and amitraz in honey and beeswax was carried out using a rapid extraction method utilizing C-18 SPE cartridges and an analytical method utilizing GC with ECD, NPD, and MSD detectors for the four acaricides. Recovery percentages from the extraction method ranged from 90-102%, while the minimum detection levels ranged from 0.01-0.05 mg/kg for the acaricides. Nine of the 21 analyzed samples were found to be contaminated with the acaricides tau-fluvalinate and coumaphos. Neither flumethrin nor amitraz was detected in any of the honey or wax samples. Coumaphos was found only in honey samples in which two samples exceeded the tolerance levels set by EPA and EC regulations. It has not been detected in beeswax. Five honey samples and eight beeswax samples were found to be contaminated with tau-fluvalinate. One of the wax samples was contaminated with a relatively high residue of tau-fluvalinate and contained above 10 mg/kg.     

Behavior of two phenyl urea herbicides in clayey soils and effect of alternating dry-wet conditions on their availability

Adsorption and mobility of linuron (3-(3,4-dichlorophenyl)-1-methoxy-1-methylurea) and diuron (3-(3,4-dichlorophenyl)-1, 1-dimethylurea) were studied in clayey soils from the Gharb area (Morocco). Soils A and B were planted with sun flower (Helianthus annuus) while soil C was planted with sugar cane (Saccharum offcinarum). Adsorption was studied for linuron in soils A and B, while mobility was studied only in soil B. Adsorption data were found to fit the Freundlich equation with correlation coefficients r2 > 0.9. Freundlich coefficients (Kf, nf) were in agreement with L and S isotherm types for soils A and B, respectively. Values of Koc (195 and 102) indicate moderate adsorption. Desorption isotherms for linuron showed hysteresis for both soils. The pesticide would be more bound to soil A (H = 8.44) than to soil B (H = 4.01). The effect of alternating wet and dry conditions was tested for soils A and B. Results showed that retention would increase in soil subject to an additional wet and dry cycle. In the case of diuron isotherm was of type L in soil C. Desorption was noticeable at high concentrations and tended to decrease when concentrations diminished. Mobility of linuron was tested in polyvinyle chloride (PVC) columns, which received different treatments before their percolation. The pesticide was more mobile in a previously saturated column. In columns subject to a drying step after saturation with water, linuron mobility was greatly reduced.     

The development of low cost adsorbents from clay and waste materials: a review

Increased energy consumption due to industrial growth has increased the levels of carbon dioxide (CO₂) emission being released into the atmosphere. CO₂ emission is a type of greenhouse gas which is a major cause of global warming. Since the issue of CO₂ emissions has drawn much attention in recent years, the development of CO₂ capture technology has become a necessity. Although CO₂ adsorbents are still at the early development stage, it has been suggested that CO₂ adsorbents are the most effective technology in controlling CO₂ emissions. Solid adsorbents have great potential as an alternative method to conventional adsorbents in adsorbing CO₂. In this paper, low cost adsorbents including activated carbon, zeolites, mesoporous silica and clays are discussed in terms of adsorbent preparation methods and CO₂ adsorption capacity. The low cost adsorbents are mainly derived from waste materials such as fly ash, steel slag, red mud, bagasses wastes and wood wastes. Besides that, natural resources such as clays have also been applied as low cost CO₂ adsorbents. Surface modifications have also been applied to the low cost adsorbents, including metal ion exchange and amine impregnation to enhance CO₂ adsorption capacity. In the last section, the current status of CO₂ adsorbents is summarized and future trends are discussed briefly to predict the potential materials which can be applied as CO₂ adsorbents.     

Validation of two air quality models for Indian mining conditions

All major mining activity particularly opencast mining contributes to the problem of suspended particulate matter (SPM)directly or indirectly. Therefore, assessment and prediction are required to prevent and minimize the deterioration of SPM due tovarious opencast mining operations. Determination of emission rate of SPM for these activities and validation of air quality models are the first and foremost concern. In view of the above, the study was taken up for determination of emission rate for SPMto calculate emission rate of various opencast mining activitiesand validation of commonly used two air quality models for Indianmining conditions. To achieve the objectives, eight coal and three iron ore mining sites were selected to generate site specific emission data by considering type of mining, method of working, geographical location, accessibility and above all resource availability. The study covers various mining activitiesand locations including drilling, overburden loading and unloading, coal/mineral loading and unloading, coal handling orscreening plant, exposed overburden dump, stock yard, workshop, exposed pit surface, transport road and haul road. Validation of the study was carried out through Fugitive Dust Model (FDM) and Point, Area and Line sources model (PAL2) by assigning the measured emission rate for each mining activity, meteorologicaldata and other details of the respective mine as an input to the models. Both the models were run separately for the same set ofinput data for each mine to get the predicted SPM concentrationat three receptor locations for each mine. The receptor locationswere selected such a way that at the same places the actual filedmeasurement were carried out for SPM concentration. Statisticalanalysis was carried out to assess the performance of the modelsbased on a set measured and predicted SPM concentration data. The value of coefficient of correlation for PAL2 and FDM was calculated to be 0.990-0.994 and 0.966-0.997, respectively, which shows a fairly good agreement between measured and predicted values of SPM concentration. The average index of agreement values for PAL2 and FDM was found to be 0.665 and0.752, respectively, which represents that the prediction by PAL2 and FDM models are accurate by 66.5 and 75.2%, respectively. These indicate that FDM model is more suited for Indian mining conditions.     

Heterogeneous Traffic Induced Effects on Vertical Dispersion Parameter in the Near Field of Roadways - a Wind Tunnel Study

The varying traffic parameters such as traffic volume, speed, shape and size, and terrain roughness conditions play a vital role on dispersion of pollutants in the near field of roadways. Simulation experiments were carried out in the Environmental Wind Tunnel (EWT) to evaluate the traffic induced effects on vertical dispersion parameter (σ _z ) for heterogeneous traffic conditions in the near field of roadways for evaluating the effect of variations in traffic volume, terrain roughness condition and approaching wind direction. The model vehicle movement system was fabricated and made operational in the EWT, which allowed the variation in traffic volume, speed and wind road inclination. Sixty-six hydrocarbon tracer experiments were performed to evaluate σ _z in the near field of roadways for variable traffic volume, three terrain roughness conditions and two approaching wind directions (i.e., 90° and 60°). The values of σ _z for heterogeneous traffic conditions were found to be higher for low roughness conditions in comparison to other two higher roughness conditions for various traffic volumes and approaching wind directions. This revised version was published online in July 2006 with corrections to the Cover Date.     

Measuring sorption of hydrophilic organic compounds in soils by an unsaturated transient flow method

Determination of sorption of hydrophilic, weakly sorbing organic compounds in soil by conventional batch methods using a slurried suspension is often prone to considerable errors because small changes in the solution concentration on equilibration must be accurately determined. This difficulty is exacerbated for compounds susceptible to degradation, which also decreases the solution concentration. The objective of this study was to determine sorption of hydrophilic pesticides by applying an unsaturated transient flow method, which enables determination of sorption at sufficiently small solution to soil ratios. The method makes use of piston-like displacement of the antecedent solution in equilibrium with sorbed phase when pesticide-free water is infiltrated into a soil column spiked with a pesticide. Pesticide sorption and the solution concentration are inferred from a plot of total pesticide content per unit mass of soil vs. water content in a region where the antecedent solution is accumulated. Thus, extraction of solution from relative dry soil is unnecessary. We tested this method for two hydrophilic pesticides, monocrotophos [dimethyl (E)-1-methyl-2-(methyl-carbamoyl) vinyl phosphate] and dichlorvos (2,2-dichlorovinyl dimethyl phosphate). The sorption coefficient, K(d), obtained for monocrotophos was slightly lower than that by batch method (K(d) = 0.10 vs. 0.19 L kg(-1)), whereas for dichlorvos, a compound highly susceptible to degradation, the unsaturated flow method yielded a much smaller K(d) (0.19 vs. 3.22 L kg(-1)). The K(d) values for both compounds were consistent with the observed retardation in the pesticide displacement in the columns. The proposed method is more representative of field conditions and particularly suitable for weakly sorbing organic compounds in soils.     

Is Globalization Detrimental to CO<Subscript>2</Subscript> Emissions in Japan? New Threshold Analysis

Using annual data from 1970 to 2014, this paper examines the effects of globalization on CO₂ emissions in Japan while accounting for economic growth and energy consumption as potential determinants of carbon emissions. The structural breaks and asymmetries arising due to policy shifts require attention, and hence, an asymmetric threshold version of the ARDL model is utilized. The results show the presence of threshold asymmetric cointegration between variables. Threshold-based positive and negative shocks arising from globalization increase carbon emissions, while the impact of the latter is more profound. Energy consumption (economic growth) also has a significant positive effect on carbon emissions. Globalization, economic growth, and energy consumption significantly increase carbon emissions in the short run. We suggest that policy makers in Japan consider globalization and energy consumption as policy tools in formulating their policies regarding protecting sustainable environmental quality in the long run. Otherwise, the Japanese economy may continue to face environmental consequences such as undesirable climate change and massive warming at the micro and macro levels as a result of potential shocks arising from globalization and energy consumption.     

Metal accumulation in Raphanus sativus and Brassica rapa: an assessment of potential health risk for inhabitants in Punjab,Pakistan

Pakistan is an agricultural country and due to the shortage of clean water, most of the irrigated area (32,500 ha) of Pakistan was supplied with wastewater (0.876?×?109 m³/year). Concentrations of heavy metals in radish (Raphanus sativus) and turnip (Brassica rapa) taken from vegetable fields in Sargodha, Pakistan, were measured. Untreated wastewater was used persistently for a long time to irrigate these vegetable fields. A control site was selected that had a history of fresh groundwater irrigation. Mean metal concentrations were found for irrigation water, soil, and vegetables. In irrigation water, concentrations of Mo and Pb at three sites and Se at sites II and III were higher than the recommended limits. In vegetables, concentrations of Mo and Pb were above the maximum permissible limits. High bioconcentration factor was observed for Zn (12.61 in R. sativus and 11.72 in B. rapa) at site I and high pollution load index was found for Pb (3.89 in R. sativus and 3.87 in B. rapa) at site II. The differences in metal concentrations found in samples depended upon different soil nature and assimilation capacities of vegetables at different sites which in turn depended upon different environmental cues. The entrance of metal and metalloids to human body may happen through different pathways; however, the food chain is the chief route through which metals are transferred from vegetables to individuals. Health risk index observed for metals, (Mo, As, Ni, Cu, and Pb) higher than 1 indicated high risk through consumption of these vegetables at three sites.