Potassium bromate (KBrO3) is a widely used food additive, a water disinfection by-product and a known nephrotoxic agent. The effect of KBrO3 on rat blood, especially on the anti-oxidant defense system, was studied in this work. Animals were given a single oral dose of KBrO3 (100 mg/kg body weight) and sacrificed 12, 24, 48, 96 and 168 h after this treatment. Blood was collected from the animals and separated into plasma and erythrocytes. KBrO3 administration resulted in increased lipid peroxidation, protein oxidation, hydrogen peroxide levels and decreased the reduced glutathione content indicating the induction of oxidative stress in blood. Methemoglobin levels and methemoglobin reductase activity were significantly increased while the total anti-oxidant power was greatly reduced upon KBrO3 treatment. Nitric oxide levels were enhanced while vitamin C concentration decreased in KBrO3 treated animals. The activities of major anti-oxidant enzymes were also altered upon KBrO3 treatment. The maximum changes in all these parameters were 48 h after the administration of KBrO3 and then recovery took place. These results show for the first time that KBrO3 induces oxidative stress in blood and impairs the anti-oxidant defense system. Thus impairment in the anti-oxidant power and alterations in the activities of major anti-oxidant enzymes may play an important role in mediating the toxic effects of KBrO3 in the rat blood. The study of such biochemical events in blood will help elucidate the molecular mechanism of action of KBrO3 and also for devising methods to overcome its toxic effects. 相似文献
This study investigated the thin-layer drying kinetics of salted silver jewfish in a hybrid solar drying system and under open sun. Ten drying models were compared with experimental data of salted silver jewfish drying. A new model was introduced, which is an offset linear logarithmic (offset modified Page model). The fit quality of the models was evaluated using the coefficient of determination (R2), root mean square error (RMSE), and sum of squared absolute error (SSAE). The result showed that Midilli et al. model and new model were comparable with two or three-term exponential drying models. This study also analyzed energy and exergy during solar drying of salted silver jewfish. Energy analysis throughout the solar drying process was estimated on the basis of the first law of thermodynamics, whereas exergy analysis during solar drying was determined on the basis of the second law of thermodynamics. At an average solar radiation of 540 W/m2 and a mass flow rate of 0.0778 kg/sec, the collector efficiency and drying system efficiency were about 41% and 23%, respectively. Specific energy consumption was 2.92 kWh/kg. Moreover, the exergy efficiency during solar drying process ranged from 17% to 44%, with an average value of 31%. The values of improvement potential varied between 106 and 436 W, with an average of 236 W. 相似文献
Upgrading of bio-oil extracted from palm kernel shell (PKS) was performed using a lab-scale fixed-bed reactor with HZSM-5 as a catalyst. The catalytic cracking was carried out at optimized conditions: 0.3-MPa pressure, temperature of 500°C, and oil to catalyst ratio of 1:5. One of the challenges in upgrading bio-oil by catalytic cracking is deactivation of catalyst due to coke formation on catalyst surface. To overcome coke deposition, the upgrading process was carried out at 0.3-MPa pressure. Characterization of raw and upgraded bio-oil obtained through catalytic cracking was discussed in detail, indicating improvement in its physical properties. The distribution of products after cracking of bio-oil includes 58.89 wt% of organic liquid product, 15.63 wt% of aqueous fraction, 7.84 wt% of coke, and 17.64 wt% of gases. The degree of deoxygenation and calorific value of organic liquid product is 43.74% and 31.65 MJ/kg respectively. Organic liquid product obtained comprises 17.55% of hydrocarbons within the gasoline range. Hence, HZSM-5 proved its effectiveness for upgrading the bio-oil in a continuous mode. 相似文献
This research was done to assess the dechlorination and decomposition of polychlorinated biphenyls (PCBs) in real waste transformer oil through a modified domestic microwave oven (MDMW). The influence of microwave power (200–1000 W), reaction time (30–600 s), polyethylene glycol (PEG) (1.5–7.5 g), iron powder (0.3–1.5 g), NaOH (0.3–1.5 g), and H2O (0.4–2 ml) were investigated on the decomposition efficiency of PCBs existing in real waste transformer oil with MDMW. Obtained data indicate that PEG and NaOH have the greatest influence on decomposition of PCBs; while, iron did not influence, and H2O decreased, the decomposition efficiency of PCBs. Experimental data also indicated that with the optimum amount of variables through a central composites design method (PEG = 5.34 g, NaOH = 1.17 g, Fe = 0.6 g, H2O = 0.8 ml and microwave power 800 W), 78 % of PCBs was degraded at a reaction time of about 6 min. In addition, the PCBs decomposition without using water increased up to 100 % in the reactor with the MDMW at 6 min. Accordingly, results showed that MDMW was a very efficient factor for PCBs decomposition from waste transformer oil. Also, using microwave irradiation, availability and inexpensive materials (PEG, NaOH), and iron suggest this method as a fast, effective, and cheap method for PCB decomposition of waste oils. 相似文献
This study assessed the oxidative stress status, antioxidant metabolism and polypeptide patterns in salt marsh macrophyte Juncus maritimus shoots exhibiting differential mercury burdens in Ria de Aveiro coastal lagoon at reference and the sites with highest, moderate and the lowest mercury contamination. In order to achieve these goals, shoot-mercury burden and the responses of representative oxidative stress indices, and the components of both non-glutathione- and glutathione-based H2O2-metabolizing systems were analyzed and cross-talked with shoot-polypeptide patterns. Compared to the reference site, significant elevations in J. maritimus shoot mercury and the oxidative stress indices such as H2O2, lipid peroxidation, electrolyte leakage and reactive carbonyls were maximum at the site with highest followed by moderate and the lowest mercury contamination. Significantly elevated activity of non-glutathione-based H2O2-metabolizing enzymes such as ascorbate peroxidase and catalase accompanied the studied damage-endpoint responses, whereas the activity of glutathione-based H2O2-scavenging enzymes glutathione peroxidase and glutathione sulfo-transferase was inhibited. Concomitantly, significantly enhanced glutathione reductase activity and the contents of both reduced and oxidized glutathione were perceptible in high mercury-exhibiting shoots. It is inferred that high mercury-accrued elevations in oxidative stress indices were obvious, where non-glutathione-based H2O2-decomposing enzyme system was dominant over the glutathione-based H2O2-scavenging enzyme system. In particular, the glutathione-based H2O2-scavenging system failed to coordinate with elevated glutathione reductase which in turn resulted into increased pool of oxidized glutathione and the ratio of oxidized glutathione-to-reduced glutathione. The substantiation of the studied oxidative stress indices and antioxidant metabolism with approximately 53-kDa polypeptide warrants further studies. 相似文献
The degradation and mineralization of two triketone (TRK) herbicides, including sulcotrione and mesotrione, by the electro-Fenton process (electro-Fenton using Pt anode (EF-Pt), electro-Fenton with BDD anode (EF-BDD) and anodic oxidation with BDD anode) were investigated in acidic aqueous medium.
Methods
The reactivity of both herbicides toward hydroxyl radicals was found to depend on the electron-withdrawing effect of the aromatic chlorine or nitro substituents. The degradation of sulcotrione and mesotrione obeyed apparent first-order reaction kinetics, and their absolute rate constants with hydroxyl radicals at pH?3.0 were determined by the competitive kinetics method.
Results and discussion
The hydroxylation absolute rate constant (kabs) values of both TRK herbicides ranged from 8.20?×?108 (sulcotrione) to 1.01?×?109 (mesotrione) L?mol?1?s?1, whereas those of the TRK main cyclic or aromatic by-products, namely cyclohexane 1,3-dione , (2-chloro-4-methylsulphonyl) benzoic acid and 4-(methylsulphonyl)-2-nitrobenzoic acid, comprised between 5.90?×?108 and 3.29?×?109?L?mol?1?s?1. The efficiency of mineralization of aqueous solutions of both TRK herbicides was evaluated in terms of total organic carbon removal. Mineralization yields of about 97?C98% were reached in optimal conditions for a 6-h electro-Fenton treatment time.
Conclusions
The mineralization process steps involved the oxidative opening of the aromatic or cyclic TRK by-products, leading to the formation of short-chain carboxylic acids, and, then, of carbon dioxide and inorganic ions. 相似文献
Efficiency of different tank-mixed additives with bentazon at half rate was investigated on (Malva parviflora) and other broad leaf weeds compared with bentazon at the full recommended rate without additives in peas in open field. All the tested additives enhanced the efficiency of bentazon at the half rate. Nonyl phenol and toximol S proved to be the most effective additives in comparison with the full rate treatment. The tested treatments did not show any significant effect on chlorophyll content and soil microorganisms. Bentazon residues were determined in certain treatments to investigate the effect of the tested additives on bentazon deposition. Samples were extracted using QuEChERS method and residues were determined using LC-MS/MS. Residues after 24 hours in the half rate treatment reached 4 times lower than the Maximum Residues Limit (MRL) (0.11 mg kg(-1)), compared to the full rate treatment (0.51 mg kg(-1)), that was slightly above the MRL. 相似文献
The growing industrial demand for sustainable materials has led to a paradigm shift in the focus from synthetic polymers towards natural fibres. This paper deals with the challenges and opportunities associated with the use of natural fibre-reinforced polymer composites in various industrial applications. Natural fibres being biodegradable, light in weight, cost-effective and environment friendly are good candidate materials for modern industrial applications. Use of natural fibres in various industries with a focus on automotive and furniture industry has been discussed. The commonly used natural fibres in polymer composites including jute, hemp, sisal, kenaf, bamboo, cotton, flax, abaca, coir etc. have been dealt with in this paper. The literature revealed that tensile strength and other mechanical properties of these fibres are comparable to synthetic fibres like glass or carbon fibres. However, the temperature stability of polymers limits their extensive use and remains an issue to be addressed. 相似文献
In this present study, adsorptive membranes for Cr(VI) ion removal were prepared by blending polyethersulfone (PES) with hydrous ferric oxide (HFO) nanoparticles (NPs). The effects of HFO NPs to PES weight ratio (0–1.5) on the physicochemical properties of the resultant HFO/PES adsorptive membranes were investigated with respect to the surface chemistry and roughness as well as structural morphologies using different analytical instruments. The adsorptive performance of the HFO NPs/PES membranes was studied via batch adsorption experiments under various conditions by varying solution pH, initial concentration of Cr(VI), and contact time. The results showed that the membrane made of HFO/PES at a weight ratio of 1.0 exhibited the highest adsorption capacity which is 13.5 mg/g. Isotherm and kinetic studies revealed that the mechanism is best fitted to the Langmuir model and pseudo-second-order model. For filtration of Cr(VI), the best promising membranes showed improved water flux (629.3 L/m2 h) with Cr(VI) ion removal of 75%. More importantly, the newly developed membrane maintained the Cr(VI) concentration below the maximum contamination level (MCL) for up to 9 h.