Sulfonated graphene nanomaterials for membrane antifouling,pollutant removal,and production of chemicals from biomass: a review

Water pollution and the unsustainable use of fossil fuel derivatives require advanced catalytic methods to clean waters and to produce fine chemicals from modern biomass. Classical homogeneous catalysts such as sulfuric, phosphoric, and hydrochloric acid are highly corrosive and non-recyclable, whereas heterogeneous catalysts appear promising for lignocellulosic waste depolymerization, pollutant degradation, and membrane antifouling. Here, we review the use of sulfonated graphene and sulfonated graphene oxide nanomaterials for improving membranes, pollutant adsorption and degradation, depolymerization of lignocellulosic waste, liquefaction of biomass, and production of fine chemicals. We also discuss the economy of oil production from biomass. Sulfonated graphene and sulfonated graphene oxide display an unusual large theoretical specific surface area of 2630 m²/g, allowing the reactants to easily enter the internal surface of graphene nanosheets and to reach active acid sites. Sulfonated graphene oxide is hydrophobic and has hydrophilic groups, such as hydroxyl, carboxyl, and epoxy, thus creating cavities on the graphene nanosheet’s surface. The adsorption capacity approached 2.3–2.4 mmol per gram for naphthalene and 1-naphthol. Concerning membranes, we observe an improvement of hydrophilicity, salt rejection, water flux, antifouling properties, and pollutant removal. The nanomaterials can be reused several times without losing catalytic activity due to the high stability originating from the stable carbon–sulfur bond between graphene and the sulfonic group.

     

Evaluating the role of feldspar on the resistivity of alkali-activated slag towards seawater attack

Environmental Science and Pollution Research - In this study, the effect of K-feldspar on the behavior of alkali-activated slag pastes (AAS) before and after exposure to seawater was evaluated by...     

Water quality monitoring of Al-Habbaniyah Lake using remote sensing and in situ measurements

Environmental Monitoring and Assessment - A good quality drinking water is essential for human survival. However, a large percentage of the populations in most developing countries (Nigeria...     

SARS-CoV-2 variants and environmental effects of lockdowns,masks and vaccination: a review

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is continuously evolving and four variants of concern have been identified so far, including Alpha, Beta, Gamma and Delta variants. Here we review the indirect effect of preventive measures such as the implementation of lockdowns, mandatory face masks, and vaccination programs, to control the spread of the different variants of this infectious virus on the environment. We found that all these measures have a considerable environmental impact, notably on waste generation and air pollution. Waste generation is increased due to the implementation of all these preventive measures. While lockdowns decrease air pollution, unsustainable management of face mask waste and temperature-controlled supply chains of vaccination potentially increases air pollution.

     

Geochemical fractionation and spectroscopic fingerprinting for evaluation of the environmental transformation of potentially toxic metal(oid)s in surface–subsurface soils

Environmental Geochemistry and Health - The contamination of soil by toxic metal(oid)s has emerged as a major concern worldwide, particularly in developing countries. A metals behavior in the soil...     

Materials,fuels, upgrading,economy, and life cycle assessment of the pyrolysis of algal and lignocellulosic biomass: a review

Climate change issues are calling for advanced methods to produce materials and fuels in a carbon–neutral and circular way. For instance, biomass pyrolysis has been intensely investigated during the last years. Here we review the pyrolysis of algal and lignocellulosic biomass with focus on pyrolysis products and mechanisms, oil upgrading, combining pyrolysis and anaerobic digestion, economy, and life cycle assessment. Products include oil, gas, and biochar. Upgrading techniques comprise hot vapor filtration, solvent addition, emulsification, esterification and transesterification, hydrotreatment, steam reforming, and the use of supercritical fluids. We examined the economic viability in terms of profitability, internal rate of return, return on investment, carbon removal service, product pricing, and net present value. We also reviewed 20 recent studies of life cycle assessment. We found that the pyrolysis method highly influenced product yield, ranging from 9.07 to 40.59% for oil, from 10.1 to 41.25% for biochar, and from 11.93 to 28.16% for syngas. Feedstock type, pyrolytic temperature, heating rate, and reaction retention time were the main factors controlling the distribution of pyrolysis products. Pyrolysis mechanisms include bond breaking, cracking, polymerization and re-polymerization, and fragmentation. Biochar from residual forestry could sequester 2.74 tons of carbon dioxide equivalent per ton biochar when applied to the soil and has thus the potential to remove 0.2–2.75 gigatons of atmospheric carbon dioxide annually. The generation of biochar and bio-oil from the pyrolysis process is estimated to be economically feasible.

     

Recycling food and agriculture by-products to mitigate climate change: a review

Food loss and waste is a major issue affecting food security, environmental pollution, producer profitability, consumer prices, and climate change. About 1.3 billion tons of food products are yearly lost globally, with China producing approximately 20 million tons of soybean dregs annually. Here, we review food and agricultural byproducts with emphasis on the strategies to convert this waste into valuable materials. Byproducts can be used for animal and plant nutrition, biogas production, food, extraction of oils and bioactive substances, and production of vinegar, wine, edible coatings and organic fertilizers. For instance, bioactive compounds represent approximately 8–20% of apple pomace, 5–17% of orange peel, 10–25% of grape seeds, 3–15% of pomegranate peel, and 2–13% of date palm seeds. Similarly, the pharmaceutical industry uses approximately 6.5% of the total output of gelatin derived from fish bones and animal skin. Animals fed with pomegranate peel and olive pomace improved the concentration of deoxyribonucleic acid and protein, the litter size, the milk yield, and nest characteristics. Biogas production amounts to 57.1% using soybean residue, 53.7% using papaya peel, and 49.1% using sugarcane bagasse.

     

Evaluation of cleaning and disinfection protocols for commercial farm equipment following a foreign animal disease outbreak

This study evaluated the microbiocidal efficacy of a cleaning and disinfection (C&D) treatment using stainless-steel coupons applied to three common types of animal mortality transport vehicles when exposed to agricultural conditions. Metal test coupons, inoculated with bacteriophage MS2, were affixed to the undercarriage of three types of animal mortality transport vehicles at various locations. Coupons were grimed by maneuvering the test vehicles down a series of wet dirt roads. Coupons were attached and extracted at various points to evaluate C&D performance with and without grime. C&D efficacy using a water-supplied pressure washing system and a dilute sodium hypochlorite (NaOCl) solution was determined by comparing the difference in recovered viable virus between positive control coupons and test coupons. The results demonstrated a relatively high surface decontamination efficacy, with all but one location showing >5 log reduction of MS2. Coupons located on the roll-off truck's inside-back bumper contained the highest level of grime and resulted in a 4 log reduction of MS2. There was no significant difference in C&D efficacy across vehicle types, but locations impacted by grime and lack of accessibility achieved lower efficacies on average. These findings suggest that common C&D protocols, when applied to farm mortality transport vehicles, are effective. Hard-to-access locations containing high levels of grime may be candidates for additional targeted treatment.     

Obstetrical outcomes following amniocentesis performed after 24 weeks of gestation: A systematic review and meta-analysis

To evaluate obstetrical outcomes for women having late amniocentesis (on or after 24 weeks). Electronic databases were searched from inception to January 1st, 2023. The obstetrical outcomes evaluated were gestational age at delivery, preterm birth (PTB) < 37 weeks, PTB within 1 week from amniocentesis, premature prelabor rupture of membranes (pPROM), chorionamnionitis, placental abruption, intrauterine fetal demise (IUFD) and termination of pregnancy (TOP). The incidence of PTB <37 weeks was 4.85% (95% CI 3.48–6.56), while the incidence of PTB within 1 week was 1.42% (95% CI 0.66–2.45). The rate of pPROM was 2.85% (95% CI 1.21–3.32). The incidence of placental abruption was 0.91% (95% CI 0.16–2.25), while the rate of IUFD was 3.66% (95% CI 0.00–14.04). The rate of women who underwent TOP was 6.37% (95%CI 1.05–15.72). When comparing amniocentesis performed before or after 32 weeks, the incidence of PTB within 1 week was 1.48% (95% CI 0.42–3.19) and 2.38% (95% CI 0.40–5.95). Amniocentesis performed late after 24 weeks of gestation is an acceptable option for patients needing prenatal diagnosis in later gestation.