WELFARE IMPLICATIONS OF TUBEWELL IRRIGATION IN BANGLADESH1

ABSTRACT: This paper investigates and estimates the welfare loss due to monopoly in tubewell irrigation water market in Bangladesh. In this context, an attempt has been made to evaluate the efficacy of the landless irrigation groups. Using cross-sectional data and regression analysis, cost and demand functions for irrigation water are estimated. The study demonstrates the relatively superior performance of the landless groups in terms of economic efficiency in shallow tubewell irrigation operation, in comparison to irrigation operation by the landowners.     

DEVELOPMENT OF A FRACTURED MEDIUM FLOW MODEL FOR A WASTE SITE1

ABSTRACT: A three‐dimensional fractured medium flow model was developed for the Bear Creek Valley (BCV) S‐3 site of the Oak Ridge Reservation (ORR) using SWIFT III. The numerical modeling for this site focused on a conceptual model established through the analysis of heterogeneous geologic units and matrix fracture properties of the subsurface in the BCV area. The SWIFT III modeling analysis was based on the previous modeling studies that used MODFLOW and MODPATH. A rigorous calibration was obtained first by comparing simulated results with the existing data on ground water levels and then by comparing pumping test results with the simulated ground water levels. A satisfactory agreement between observed and simulated results was obtained. The calibrated model was used to determine sustained yield from a ground water interceptor trench. Different withdrawal rates were used to simulate the performance of the trench for the sustained withdrawal of ground water.     

Environmental impact of aquaculture-sedimentation and nutrient loadings from shrimp culture of the southeast coastal region of the Bay of Bengal

Nutrient Ioadings were measured for surface seawater and bottom sediments of semi-intensive and improved extensive shrimp culture pond, adjacent estuary, and fallow land in the south-east coastal region of Bangladesh during August, 2000--January, 2001 to evaluate the impact of shrimp culture. The mean levels of nutrients found in the pond surface water were 108.780 mg/L for CaCO3, 0.526 mg/L for NH4^ -N, 3.075 wt% for organic carbon, 7.00 mg/L for PO4-P, 5.57 mg/L for NO3-N, and 7.33 mg/L for chlorophyll-a. The maximum mean value of H2S(0.232 mg/L) was found in estuarine water. Nutrients loading were found to be decreased with distance from the shrimp farm discharge unit in estuarine water. The mean level of organic matter, total nitrogen, and organic carbon were found in higher concentrations in sediments of cultured pond compared to bottom soil of adjacent fallow land at the same elevation. Extractable Ca values were found in higher concentration(550.33 ppt) in adjacent fallow land, as the shrimps for molting in shrimp ponds use extractable Ca. The relation between seawater H2S value and sediment pH ( r= -0.94); sediment organic carbon and sediment pH values ( r= -0.76), sediment total nitrogen and sediment pH ( r = - 0.74) were found to be highly negatively correlated. Whereas the relation between seawater H2S value and sediment total nitrogen ( r= 0.92), water NH4^ -N and sediment pH ( r = 0.66) were found to be positively correlated. The results revealed that load of nutrients at eutrophic level in estuarine water, and decrease of soil pH; leading to acid sulphate soil formation indicates a negative impact of shrimp culture.     

Amelioration of toxicopathological effects of cadmium with silymarin and milk thistle in male Japanese quail (Coturnix japonica)

Environmental Science and Pollution Research - Cadmium is an important widely distributed heavy metal in the environment due to its several industrial uses, while milk thistle is an important herb...     

Nano-sized Prussian blue immobilized costless agro-industrial waste for the removal of cesium-137 ions

Environmental Science and Pollution Research - For human health and safety, it is of great importance to develop innovative materials with a vast capacity for powerful removal of radioactive ions...     

Green sol–gel synthesis of novel nanoporous copper aluminosilicate for the eradication of pathogenic microbes in drinking water and wastewater treatment

Environmental Science and Pollution Research - We used a green sol–gel synthesis method to fabricate a novel nanoporous copper aluminosilicate (CAS) material. Nanoporous CAS was characterized...     

Review on the innovative uses of steel slag for waste minimization

Piles of steel slag, a solid waste generated from the iron and steel industry, could be seen due to no utility found for the past century. Steel slag has now gained much attention because of its new applications. The properties of slag greatly influence its use and thus had got varied applications. The chemical composition of steel slag varies as the mineral composition of raw material such as iron ore and limestone varies. This paper reviews the characteristics of steel slag and its usage. The paper reviews recent developments in well-known applications to the steel slag such as aggregate in bituminous mixes, cement ingredient, concrete aggregate, antiskid aggregate, and rail road ballast. This paper also reviews novel uses such as mechanomutable asphalt binders, building material, green artificial reefs, thermal insulator, catalyst and ceramic Ingredient. The review is also done on utilization of solid waste for waste management by the novel methods like landfill daily cover material, sand capping, carbon sequestration, water treatment and solid waste management. Review also shows recovery of pure calcium carbonate and heavy metals from slag, providing opportunity for revenue generation. Steel slag once traded as free to use by steel industries is now sold in the market at some price. Its utilization is of great economic significance as it also contributes to the reduction of solid waste.     

Radioactive Contamination Control by Atmospheric Dispersion Assessment of Airborne Indicator Contaminants: Numerical Model Validation

In this work, a numerical model is proposed to estimate air concentration of released airborne radioactive contaminants ¹³¹I and ¹³⁷Cs. A Gaussian dispersion model is used to assess the atmospheric dispersion of radioactive contaminants released continuously from a nuclear power plant as a result of an accident. The model uses various input parameters such as source height, release rate, stability class, wind speed, and wind direction. The validation of the model was carried out by comparing its predicted values with published experimental data. The model was extensively tested by simulating several accidental situations. The main conclusion drawn from these tests is that for large downwind distances from the release point, the contaminant concentrations predicted by the model diverge drastically from measured data, while for short distances, the predicted values generally agree quite well with experimental data. The obtained activity concentrations range from 1.57?×?10² to 6.43?×?10³ Bq/m³ for ¹³¹I and from 3.18?×?10^?2 to 9.72?×?10² Bq/m³ for ¹³⁷Cs. The estimated standard deviation coefficients values range of 7.2 to 6847.7 m, and the maximum absolute error predicted by the model for these parameters was less than 5%.     

Potential Impact of Climate Change on Residential Energy Consumption in Dhaka City

This study aimed to assess the impacts of climate change on residential energy consumption in Dhaka city of Bangladesh. The monthly electricity consumption data for the period 2011–2014 and long-term climate variables namely monthly rainfall and temperature records (1961–2010) were used in the study. An ensemble of six global circulation models (GCMs) of coupled model intercomparison project phase 5 (CMIP5) namely, BCCCSM1-1, CanESM2, MIROC5, MIROC-ESM, MIROC-ESM-CHEM, and NorESM1-M under four representative concentration pathway (RCP) scenarios were used to project future changes in rainfall and temperature. The regression models describing the relationship between historical energy consumption and climate variables were developed to project future changes in energy consumptions. The results revealed that daily energy consumption in Dhaka city increases in the range of 6.46–11.97 and 2.37–6.25 MkWh at 95% level of confidence for every increase of temperature by 1 °C and daily average rainfall by 1 mm, respectively. This study concluded that daily total residential energy demand and peak demand in Dhaka city can increase up to 5.9–15.6 and 5.1–16.7%, respectively, by the end of this century under different climate change scenarios.     

Does the application of silicon and Moringa seed extract reduce heavy metals toxicity in potato tubers treated with phosphate fertilizers?

Environmental Science and Pollution Research - Two field trials were carried out in two successive agricultural seasons to study the possibility of using silicon (Si) and Moringa seed extract (MSE)...