Distribution Of Cadmium And Nickel Among Various Forms In Natural And Contaminated Soils Amended With Edta

Because of its strong chelating capacity, application of ethylenediaminetetraacetic acid (EDTA) to soils may change the amount and distribution of heavy metals among their various chemical forms. Therefore, a greenhouse experiment was conducted using two cultivars of Brassica species (Brassica juncea and Brassica carinata) as hyper accumulator test crops on natural and artificially Cd and Ni contaminated soils. Both natural and metal amended soils were treated with disodium salt of EDTA at 0 and 1 g kg^–1 soil. After harvest of crops, soil samples were fractionated into water soluble plus exchangeable (WE), carbonate (CARB), organic matter (OM), Mn oxide (MnOX), amorphous Fe oxide (AFeOX), crystalline Fe oxide (CFeOX) and residual (RES) fractions. In metal amended soils, Cd and Ni were found predominantly in the AFeOX fraction in the absence of EDTA application and in the WE fraction in EDTA treated soil. Application of EDTA resulted in the redistribution of Cd among different forms and increased significantly Cd in the WE fraction with a concomitant significant decrease in the OM fraction. In natural soils, more than 40% of the total Cd was present in the RES fraction while in contaminated soil it was only 5%. Nickel in the WE fraction increased significantly while it considerably decreased in the CARB, OM, MnOX, AFeOX and CFeOX fractions with EDTA addition. This indicated that applied EDTA is capable to move Cd and Ni from the less soluble or more stable forms (CARB, OM, MnOX, AFeOX and CFeOX) to the most soluble form (WE). N natural soils, Ni in the RES fraction was found upto 49%, whereas only 10% of the total Ni was observed in contaminated soil, irrespective of EDTA treatment. In general, the amount of Cd recovered after harvest of both the Brassica cultivars did not differ significantly in any fraction except the WE fraction. The amount of Ni recovered in the AFeOX fraction was significantly higher after harvest of B. juncea as compared to B. carinata.Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Dynamic simulation of water depletion in the root zone

The joint effect of the distribution of the soil water potential and of the root mass in the crop root zone upon the water uptake by the crop is represented by a simple equation. This expression is used to join a layered crop canopy model for finding the evapotranspiration, as controlled by stomatal action and the weather, with a hydraulic flow model for the root zone and the underlying soil. The complete model is used for the calculation of the water extraction pattern and the changes, with time, of other plant and soil processes. A simulation of a 20-day drying period is performed, using S/360 CSMP, for a constant diurnal weather pattern, and for a fully developed sorghum crop. The results show that, after a few days of essentially constant water use by the crop, a monotonic decline sets in, that is principally attributable to the decrease in transpiration. For the entire drying period a substantial amount of water - about 30% of the total used - is contributed by upward flow into the root zone from the soil below. The results demonstrate the difficulty of quantitative definition of concepts such as “field capacity”, “wilting percentage”, and “available” or “extractable” water.     

Biochemical interaction of six OP delayed neurotoxicants with several neurotargets

Five organophosphorous insecticides: Leptophos, EPN, Cyanofenphos, trichloronate and salithion proved to cause irreversible ataxia not only to chicken but also to mice and sheep. TOCP was included as a reference. Cyanofenphos blocked the catecholamine B-receptor binding activity with 3H-norepinephrine at a level similar to that of the specific inhibitor propranolol in the mouse heart preparation. In the lamb heart preparation, the B-receptor was more sensitive to Leptophos, salithion and TOCP than to propranolol. The six compounds and their oxons were screened for their in-vitro inhibition to monamine oxidase (MAO), acetyl cholinesterase (AChE) and neurotoxic esterase (NTE) in the brain of either mouse, lamb or chicken. It is believed that their AChE inhibition stands for their acute toxicity, while NTE inhibition is responsible for their paralytic ataxia.     

In vivo K-shell X-ray fluorescence bone lead measurements in young adults

The (109)Cd K-shell X-ray fluorescence (XRF) technique was used to measure in vivo tibia lead concentrations of 34 young adults living in the state of Vermont (USA) and the province of New Brunswick (Canada). The subjects ranged in age from 18 to 35 years, and had no known history of elevated lead exposure. Measurement parameters were varied, using the same XRF system for both populations. Tibia lead concentrations were low for both groups, with mean values of 0.7 microg lead g(-1) bone mineral (Vermont) and 0.5 microg g(-1)(New Brunswick). No individual measurement exceeded 7 microg g(-1). Mean uncertainty values obtained for the Vermont and New Brunswick subjects were 4.1 microg g(-1) and 2.6 microg g(-1), respectively. Improved measurement uncertainty in the New Brunswick group was attributed to the use of a reduced source-to-skin distance (approximately 5 mm) and a longer measurement time (3600 seconds) using a weaker radioisotope source (< or =0.42 GBq). Measurement uncertainty tended to increase with body mass index. For a given body mass index, female subjects returned a measurement uncertainty approximately 1 microg g(-1) greater than males.     

Investigation of activated carbon/ethanol for low temperature adsorption cooling

Commercially available adsorption cooling systems use water/silica gel, water/zeolite and ammonia/ chloride salts working pairs. The water-based pairs are limited to work above 0°C due to the water high freezing temperature, while ammonia has the disadvantage of being toxic. Ethanol is a promising refrigerant due to its low freezing point (161 K), nontoxicity, zero ozone depletion, and low global warming potential. Activated carbon (AC) is a porous material with high degree of porosity (500–3000 m²/g) that has been used in wide range of applications. Using Dynamic Vapour Sorption (DVS) test facility, this work characterizes the ethanol adsorption of eleven commercially available activated carbon materials for cooling at low temperature of ?15°C. DVS adsorption results show that Maxsorb has the best performance in terms of ethanol uptake and adsorption kinetics compared to the other tested materials. The Maxsorb/ethanol adsorption process has been numerically modeled using computational fluid dynamics (CFD) and simulation results are validated using the DVS experimental measurements. The validated CFD simulation of the adsorption process is used to predict the effects of adsorbent layer thickness and packing density on cycle uptake for evaporating temperature of ?15°C. Simulation results show that as the thickness of the Maxsorb adsorbent layer increases, its uptake decreases. As for the packing density, the amount of ethanol adsorbed per plate increases with the packing density reaching maximum at 750 kg/m³. This work shows the potential of using Maxsorb/ethanol in producing low temperature cooling down to ?15°C with specific cooling energy reaching 400 kJ/kg.     

Wind speed pattern data and wind energy potential in Pakistan: current status,challenging platforms and innovative prospects

Environmental Science and Pollution Research - Energy is an essential parameter for the economic growth and sustainable development of any country. Due to the rapid increase in energy demand,...     

Effect of High Content of Deinking Paper Sludge (DPS) on the Reinforcement of HDPE

Deinking paper sludge (DPS)/high density polyethylene (HDPE) composites with and without coupling agent (3 % of maleated polyethylene (MAPE)) were manufactured by twin-screw extrusion followed by injection molding with high percentages of DPS (0, 20, 30 and 40 %). The effects of DPS content and MAPE on the mechanical, thermal, and morphological properties of the DPS/HDPE composites were investigated. Increasing DPS content in composites increased the tensile and flexural modulus (E; MOE), tensile and flexural strength (Rm; MOR), while decreased elongation at break and Un-notched impact resistance due to a poor adhesion between the DPS and HDPE. The addition of DPS also improved the thermal stability and increased the composites crystallinity. High content of DPS (40 %) and 3 % MAPE achieved good interfacial adhesion between fibres of DPS and HDPE. Therefore, an increase is observed for Rm, MOR, ductility, and impact toughness.