Additional steps in mechanical recyling of PET

This study presents the laboratory scale results of an extra step in Poly (ethylene terephthalate) – PET mechanical recycling (grinding, washing, drying and reprocessing): a chemical washing after the conventional one. Cooking oil PET bottle flakes were washed in water and then subjected to a reaction with an aqueous solution of sodium hydroxide 5 M at 90 °C for 10 min (chemical washing). After rinsing and drying, the flakes were characterized by thermogravimetry, gas chromatography and elemental analysis tests. The results indicated that the chemically washed material had higher purity than PET washed only with water: 99.3% and 96.7%, respectively, which undoubtedly implies properties, applications and prices closer to those of virgin resin. The production of purified terephthalic acid (TPA) from the chemical washing residue was optimized and reached a purity of 99.6%. Despite the results, the use of chemically washed PET and of TPA obtained is not recommended for direct contact with food, since they still contain some impurities.     

TEMPO-Mediated Oxidation of Norway Spruce and Eucalyptus Pulps: Preparation and Characterization of Nanofibers and Nanofiber Dispersions

This study deals with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation of cellulose. Softwood and hardwood pulp fibers were suspended in water and oxidized to various extents at pH 10 and 22 °C using sodium hypochlorite in the presence of TEMPO radical and sodium bromide. This reaction system is known to be the most efficient one for the introduction of both surface carboxyl and aldehyde groups. Important relationships between formation of these functional groups and the fibrillation yield, light transmittance of the water dispersions and degree of polymerization of the oxidized softwood and hardwood pulps were established in the present study. A birefringence test confirmed the presence of nanofibers which according to atomic force microscopy analyses had diameters in the 1.6–3.8 nm range.     

Chronological trends in trace metals recorded by a tree bark pocket in Yakushima Island, Japan

Bark included within the trunk of a 200-year-old Japanese cedar tree harvested in Yakushima Island, Japan, a World Natural Heritage Site located 150 km south of mainland Japan and 800 km east of Shanghai, China, was analysed for trace metals by ICP-MS providing a chronology of atmospheric pollution. The concentration of V, As and Pb in decadal sections of the bark pocket increased 30 to 50 fold from 1900-09 to 1960-69, indicating increased atmospheric deposition of these metals. The trend coincided with the establishment and expansion of heavy industries in Kyushu, Japan, resulting in locally high levels of air pollution. V, As and Pb subsequently declined, reflecting lower industrial emissions following air pollution control legislation from the late 1960's and decline in heavy industries. Ni, Cu and Zn showed a relatively small, 7 to 10 fold increase over time. Lead isotope ratios in the bark pockets shifted from about 0.84 to 0.86 for 207Pb/206Pb and from 2.04 to 2.10 for 208Pb/206Pb, showing that the origin of atmospheric lead changed over time from coal to more diverse sources.     

Evaluation of the sensitivity of marine microalgal strains to the heavy metals, Cu, As, Sb, Pb and Cd

The sensitivity of nine marine microalgal species (consisting of five divisions and seven genera) to the five heavy metals, Cu(II), As(V), Sb(III), Pb(II) and Cd(II) was studied by using a fluorometric growth-inhibition assay with 96-well microplates. The algal strains studied were Cylindrotheca sp. and the LPP group that respectively characterize aggregating and filamentous types, and Chlorococcum littorale, Chlorococcum sp., Isochrysis galbana, Tetraselmis tetrathele, Heterocapsa sp., Synechococcus sp. and Prasinococcus sp. for types that occur as single cells. A good linear relationship was observed between the chlorophyll a concentration and intensity of chlorophyll fluorescence (485-nm excitation filter and 645-nm emission filter) when the chlorophyll a concentration was within the range of 0.10-5.0 microg ml(-1). A starting cell concentration of 0.10 or 0.25 microg Chl a ml(-1) was therefore selected. In accordance with OECD 201 standard procedures, the IC(50) value (concentration of a metal producing 50% growth inhibition relative to the control) was determined 72 h after adding a heavy metal by using the biomass integral. The microplate toxicity test used in this study is considered to be applicable to diverse algae, not only enumerating species but also hardly enumerating ones.     

Relevance of coplanar PCBs for TEQ emission of fluidized bed incineration and impact of emission control devices

Five fluidized bed incinerators combusting municipal solid waste were assessed for the impact of coplanar PCBs on total TEQ emission. In 17 stack measurements, the coplanar PCBs contributed on average less than 3% to total TEQ with a maximum contribution of 7.5% to total TEQ in one measurement. Differences in the design of the flue gas cooling section did not show an effect on the impact of coplanar PCBs on total TEQ. The effect of emission control devices on the impact of coplanar PCBs on the total TEQ was studied in more detail at one incinerator. The relative contribution of PCBs to total TEQ increased along the flue gas line. This was caused by a slightly higher removal efficiency for TEQ relevant PCDDs/PCDFs compared to coplanar PCBs by the bag filters and a higher destruction efficiency for PCDDs/PCDFs compared to PCBs by the SCR catalyst. Additionally, the removal efficiencies of the emission control devices (bag filters and catalyst) for other chlorinated aromatic compounds which have been proposed as TEQ indicator compounds (polychlorinated benzenes and polychlorinated phenols) were compared with those for PCDDs/PCDFs and coplanar PCBs. Removal efficiencies for polychlorinated benzenes or polychlorinated phenols considerably differed from those of PCDD/PCDF and coplanar PCBs. Implications for TEQ assessments using indicator compounds as proposed in the literature are discussed.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in sediment, soil, fish, shellfish and crab samples from Tokyo Bay area, Japan

Concentrations of tetra- to octa-chlorinated dibenzo-p-dioxins and dibenzofurans in samples collected in or near Tokyo Bay, Japan, with a densely inhabited catchment area, were congener-specifically determined and discussed. Analyzed in this study were samples of surface sediment covering the whole bay area, reference soil representing atmospheric impact, and fish, shellfish and crab commonly consumed as food. The range of concentrations were comparable to or higher than those in other parts of Japan. The origins of these compounds in the catchment area of the bay were investigated in terms of homolog and isomeric compositions in the sediment samples. Biota-sediment accumulation factors for benthic species declined as the degree of chlorination increased.     

Examination of dioxin fluxes recorded in dated aquatic-sediment cores in the Kanto region of Japan using multivariate data analysis

Past dioxin (coplanar polychlorinated biphenyl (Co-PCB), 2,3,7,8-substituted polychlorinated dibenzo-p-dioxin (PCDD) and 2,3,7,8-substituted polychlorinated dibenzofuran (PCDF)) fluxes recorded in dated aquatic-sediment cores were analyzed using principal component analysis (PCA). The data set consisted of samples from four cores collected from the Kanto region of Japan. Time trends and spatial differences in the dioxin flux were examined, and the potential relationship to emission sources was investigated. Twenty-five compounds and 58 core slices, corresponding to the later half of the 20th century, were subjected to the analysis. The PCA of both log-transformed and maximum-value-standardized data successfully divided the dioxin compounds into a small number of groups, and three similar clusters of Co-PCBs, PCDDs and penta- to hepta-CDFs were identified. PCB formulations used in the past are judged to have been responsible for the major part of the Co-PCB flux recorded in the sediment cores. However, the relationship to emission sources needs further investigation. It is suggested that most 2,3,7,8-substituted PCDDs and PCDFs are different from Co-PCBs in their emission sources or movements in the environment. The subcore clusters obtained from the PCA of log-transformed data show that the cores from different sampling areas exhibited distinct dioxin fluxes and compositions. Common time trends among the cores were more effectively summarized by the PCA of maximum-value-standardized data focusing on relative time trends. PC scores show that recently the flux of each dioxin compound in the four cores has been generally declining after having reached a peak.     

New method for bis (methylmercuric) selenide synthesis from methylmercuric chloride,sodium selenite and reduced glutathione

Bis(methylmercuric) selenide [BMS, (CH₃Hg)₂Se] was obtained by the reaction of methylmercuric chloride and sodium selenite in the presence of reduced glutathione or cysteine in a reasonable yield. The reaction is simple and useful for BMS synthesis.