100-year simulation of mercury emissions from landfilled stabilized mercury waste

Journal of Material Cycles and Waste Management - Owing to Minamata Convention on mercury, the final disposal of mercury in environmentally safe manners will be required. Mercury disposal in...     

Properties and biodegradability of chain-extended copoly(succinic anhydride/ethylene oxide)

Chain-extension reactions were carried out using titanium-iso-propoxide (TIP) as a catalyst for a series of polyesters or copolyesterethers with low molecular weights (M _n =1500–10,000) synthesized by the ring-opening copolymerization of succinic anhydride (SA) with ethylene oxide (EO). The copolymers having aM _n from 25,000 to 50,000 of different properties were obtained. Both the melting point (T _m ) and the fusion heat (H), which indicate the crystallinity of the copolymers, rose with an increase in SA content in the copolymers. Semitransparent films were prepared by compression molding of the copolymers. The biodegradation of the copolymer films was evaluated by enzymatic hydrolysis by lipases and by an aerobic gas evolution test in standard activated sludge. The hydrolyzability of these copolymers by three kinds of lipases was affected by their copolymer composition SA/EO, form, andM _n . The copolyesterether (SA/EO=43/57,M _n =48,900) was more easily biodegraded by standard activated sludge compared to the polyester (SA/EO=47/53,M _n =36,300).Presented at the Pacifichem-95, December 17–22, 1995, Honolulu, Hawaii.     

Removal of bisphenol a in soil by cyclodextrin derivatives

The apparent aqueous solubility of the endocrine disruptor in hydroxypropyl‐cyclodextrin (HP‐CD) solutions was investigated for evaluating the remediation of soil contamination and ground water pollution. The apparent solubility of bisphenol A (BPA) in water was significantly increased in HP‐CD solutions. The solubilization effect of HP‐CD's is caused by the formation of inclusion complexes of BPA and cyclodextrin. The relative aqueous‐phase concentration of BPA linearly increased with increasing HP‐CD concentration. The solubility of BPA increased in the order of the addition of HP‐a‐CD, HP‐7‐CD, and HP‐ß‐CD. However, it did not depend upon the degree of hydroxypropylation substitution. It is concluded that HP‐CD may be utilized for the remediation of soil contamination.     

Environmental and human exposure assessment monitoring of communities near an abandoned mercury mine in the Philippines: a toxic legacy

Abandoned mines are an important global concern and continue to pose real or potential threats to human safety and health including environmental damage/s. Very few countries had government mine regulation and reclamation policies until the latter part of the century where legal, financial and technical procedures were required for existing mining operations. Major reasons for mine closure may be mainly due to poor economies of the commodity making mining unprofitable, technical difficulties and national security. If the mine is abandoned, more often than not it is the government that shoulders the burden of clean-up, monitoring and remediation. The topic of abandoned mines is complex because of the associated financial and legal liability implications. Abandoned mercury mines have been identified as one of the major concerns because of their significant long-term environmental problems. Primary mercury production is still ongoing in Spain, Kyrgzystan, China, Algeria, Russia and Slovakia while world production declined substantially in the late 1980s. In the Philippines, the mercury mine located southeast of Manila was in operation from 1955 to 1976, before ceasing operation because of the decline in world market price for the commodity. During this time, annual production of mercury was estimated to be about 140,000 kg of mercury yearly. Approximately 2,000,000 t of mine-waste calcines (retorted ore) were produced during mining and roughly 1,000,000 t of these calcines were dumped into nearby Honda Bay to construct a jetty to facilitate mine operations where about 2000 people reside in the nearby three barangays. In October, 1994 the Department of Health received a request from the Provincial Health Office for technical assistance relative to the investigation of increasing complaints of unusual symptoms (e.g. miscarriages, tooth loss, muscle weakness, paralysis, anemia, tremors, etc.) among residents of three barangays. Initial health reports revealed significant elevation of blood mercury levels exceeding the then recommended exposure level of 20ppb in 12 out of the 43 (27.9%) residents examined. The majority of the volunteers were former mine workers. In this study the abnormal findings included gingivitis, mercury lines, gum bleeding and pterydium. The most common neurologic complaints were numbness, weakness, tremors and incoordination. Anemia and elevated liver function tests were also seen in a majority of those examined. The assessment also revealed a probable association between blood mercury level and eosinophilia. The same association was also seen between high mercury levels and the presence of tremors and working in the mercury mine. To date, there are very limited environmental and health studies on the impact of both total and methylmercury that have been undertaken in the Philippines. Thus, this area of study was selected primarily because of its importance as an emerging issue in the country, especially regarding the combined effects of total and methylmercury low-dose and continuous uptake from environmental sources. At present the effects of total mercury exposure combined with MeHg consumption remain an important issue, especially those of low-dose and continuous uptake. Results of the study showed that four (4) species of fish, namely ibis, tabas, lapu-lapu and torsillo, had exceeded the recommended total mercury and methylmercury levels in fish (NV>0.5 microg/gf.w., NV>0.3 microg/gf.w., respectively). Saging and kanuping also exceeded the permissible levels for methylmercury. Total and methylmercury in canned fish, and total mercury in rice, ambient air and drinking water were within the recommended levels, however, additional mercury load from these sources may contribute to the over-all body burden of mercury among residents in the area. Surface water quality at the mining area, Honda Bay and during some monitoring periods at Palawan Bay exceeded total mercury standards (NV>0.002 ng/mL). Soil samples in two sites, namely Tagburos and Honda Bay, exceeded the EPA Region 9 Primary Remediation Goal recommended values for total mercury for residential purposes (NV>23 mg/kg). The hand to mouth activity among infants and children is another significant route for mercury exposure. Statistically significant results were obtained for infants when comparing the results after one year of monitoring for methylmercury levels in hair for both exposed and control sub-groups. Likewise, comparing the initial and final hair methylmercury levels among pregnant women/mothers in the exposed group showed statistically significant (p<0.05) results. Comparing the exposed and control sub-groups' mercury hair levels per sub-group showed statistically significant results among the following: (a) initial and final total mercury hair levels among children, (b) initial and final methylmercury hair levels among children, (c) final total mercury hair levels among pregnant women, (d) initial and final total mercury hair levels among mothers, and (e) initial and final methyl hair levels among mothers.     

Evaluation of river pollution of neonicotinoids in Osaka City (Japan) by LC/MS with dopant-assisted photoionisation

An atmospheric pressure photoionisation (APPI) source for liquid chromatography/mass spectrometry (LC/MS) was applied to determine neonicotinoid pesticides in the aquatic environment. Dopant-assisted APPI was very effective in the ionisation of neonicotinoids. Neonicotinoids generated protonated molecules in APPI with high sensitivity, while adduct ions, such as sodiated molecules, were predominantly generated in conventional electrospray ionisation. The ionisation of neonicotinoids was confirmed by ultra-high-resolution MS. An analytical method coupled with solid phase extraction was developed for acetamiprid, clothianidin, dinotefuran, imidacloprid, nitenpyram, and thiamethoxam. Method detection limits were 0.47 to 2.1 ng L(-1) for six neonicotinoids. Dinotefuran was the most frequent and highest among the neonicotinoids examined in the aquatic environment in Osaka, Japan. The maximum concentration of dinotefuran was 220 ng L(-1). Given the toxicity of neonicotinoids for aquatic creatures, the concentrations observed here were substantially low. The change in concentrations was temporally coincident with the period of the neonicotinoid application. Although rapid photodegradation and some degradation products have been elucidated, the degradation products in the aquatic environment were not identified in the present study.     

Production of 2-Pyrrolidone from Biobased Glutamate by Using Escherichia coli

We have developed a simple and highly efficient process for the production of 2-pyrrolidone (2-PRN) from biobased l-glutamic acid (Glu). First, we produced γ-aminobutyric acid (GABA) from Glu obtained by fermentation of biomass using Escherichia coli, which is known to possess GABA producing activity. The reaction solution contained only the substrate Glu, bacterial cells, and water, and did not require buffers or coenzymes, pyridoxal-5′-phosphate (PLP). Every 24 h, cells were removed by centrifugation, and GABA containing supernatant was obtained. This reaction can be repeated 14 times by adding water and Glu, without any decrease in activity. Finally, 303.7 g of GABA was produced from 560 g (40 g × 14 times) of Glu with a yield of 77.4 %. The concentration of this solution was almost 40 %. The GABA was then converted to biobased 2-PRN by heating and distillation under reduced pressure without pretreatment. The yield obtained with this chemical process was 95.8 %. These results showed that biobased 2-PRN could be produced from biomass-derived Glu. Biobased 2-PRN has great potential as a raw material to change other petroleum-based materials to biobased materials.     

Effect of carbon tetrachloride on sonochemical decomposition of methyl orange in water

Two types of sonicators were used for the sonochemical decomposition of methyl orange (MO) in the presence and absence of carbon tetrachloride (CCl4): One is a 45kHz ultrasonic cleaning bath (a low intensity sonicator) and the other is a 200kHz ultrasonic reactor (a high intensity sonicator). It was clearly confirmed that the rates of the sonochemical decomposition of MO increased with increasing the concentration of CCl4 in both sonicators. The enhancement effect of CCl4 was much higher in the high intensity sonicator than in the low intensity one: by the addition of 100ppm of CCl4, the decomposition ratio of MO with the high intensity sonicator became 41 times larger, while that with the low intensity sonicator became 4.8 times larger. Based on the obtained results, it was suggested that the formed cavitation phenomenon was different between sonicators. It was also suggested that the sonochemical decomposition of MO in the presence of CCl4 would be useful to evaluate the sonochemical efficiency, because the rate of MO decomposition can be effectively enhanced by the sonolysis of CCl4.     

Mechanism and Characterization of Polyamide 4 Degradation by <Emphasis Type="Italic">Pseudomonas</Emphasis> sp.

We identified a biodegrading microorganism of polyamide (nylon) 4, a linear polymer of γ-aminobutyric acid (GABA). From activated sludge, the biodegrading bacteria strains of Pseudomonas sp. were isolated and identified by their taxonomic characteristics and nucleotide sequences of 16S rDNA. One strain, ND-11, was grown on a minimal medium containing polyamide 4 (PA4) as the sole carbon source. The strain produced GABA as a degradation intermediate, as identified by analyzing the NMR spectra of degraded products. The culture supernatant of strain ND-11 degraded the emulsified PA4 completely within one day. These results suggest that the ND-11 strain degraded PA4 using its extracellular enzymes to hydrolyze amide bonds.     

Hydrogen sulfide removal by iron containing activated carbon

Activated carbon modified by impregnation with iron (III) chloride solution (Fe‐ACs) were studied to try to raise their adsorption capacity for hydrogen sulfide, a malodorous substance.

The surface area and pore volume of activated carbon were decreased by impregnation, but the amount of hydrogen sulfide adsorbed onto Fe‐AC was larger than that onto raw activated carbon (R‐AC). In particular, a large increase of the amount adsorbed onto Fe‐AC was noted at low equilibrium pressure. It was assumed that the increase of amount of hydrogen sulfide adsorbed onto Fe‐AC was due to the chemical interaction between iron (III) chloride on the pores in addition to the physical adsorption onto pores of activated carbon. Fe‐AC shows a high selectivity for hydrogen sulfide.