Biopesticide and formulation processes based on starch industrial wastewater fortified with soybean medium

Abstract

The aim of this study was to produce Bacillus thuringiensis-based biopesticide using starch-producing industry wastewater (SIW) fortified with soybean medium and optimize the formulated product using different adjuvants. This study was necessary as low endotoxin concentration is obtained in formulated biopesticide when SIW alone is used as fermentation medium. The fermentation runs were conducted using SIW alone and SIW fortified with 25% soybean (w/v) medium in 2000?L and 150?L bioreactor, respectively. SIW supplemented with soybean medium showed an increase in cell count (from 1.95?×?10⁸ to 1.65?×?10⁹ CFU mL^–1), spore synthesis (from 1.5?×?10⁸ to 1.35?×?10⁹ CFU mL^–1) and endotoxin concentration (from 436 to 1170?μg mL^–1) when compared to SIW medium alone. The fermented broth was concentrated using continuous centrifugation and adjuvants were added for biopesticide formulation in order to enhance its resistance against UV rays and rainfastness. Entomotoxicity of the formulation produced using fermented broth of SIW fortified with soybean (38,000?IU μL^–1) was higher than that obtained by SIW medium alone (21,000?IU μL^–1), commercial biopesticide Foray 76B (20,000?IU μL^–1) and Btk sander’s (12,500?IU μL^–1).     

Polycyclic aromatic hydrocarbons, black carbon, and molecular markers in soils of Switzerland

Polycyclic aromatic hydrocarbons (PAH) were analysed in 23 soil samples (0–10 cm layer) from the Swiss soil monitoring network (NABO) together with total organic carbon (TOC) and black carbon (BC) concentration, as well as some PAH source diagnostic ratios and molecular markers. The concentrations of the sum of 16 EPA priority PAHs ranged from 50 to 619 μg/kg dw. Concentrations increased from arable, permanent and pasture grassland, forest, to urban soils and were 21–89% lower than median numbers reported in the literature for similar Swiss and European soils. NABO soils contained BC in concentrations from 0.4 to 1.8 mg/g dw, except for two sites with markedly higher levels. These numbers corresponded to 1–6% of TOC and were comparable to the limited published BC data in soil and sediments obtained with comparable analytical methods. The various PAH ratios and molecular markers pointed to a domination of pyrogenically formed PAHs in Swiss soils. In concert, the gathered data suggest the following major findings: (1) gas phase PAHs (naphthalene to fluorene) were long-range transported, cold-condensated at higher altitudes, and approaching equilibrium with soil organic matter (OM); (2) (partially) particle-bound PAHs (phenanthrene to benzo[ghi]perylene) were mostly deposited regionally in urban areas, and not equilibrated with soil OM; (3) Diesel combustion appeared to be a major emission source of PAH and BC in urban areas; and (4) wood combustion might have contributed significantly to PAH burdens in some soils of remote/alpine (forest) sites.     

Impact of ozone on the growth of birch (Betula pendula) saplings

Saplings of one half-sib family of birch, Betula pendula, were exposed to three levels of ozone in open-top chambers (OTCs) during two growing seasons 1997-1998. The ozone treatments were non-filtered air (NF, accumulated daylight AOT40 over the two growing seasons of 3.0 l l-1 h), non-filtered air with extra ozone (NF+, accumulated daylight AOT40 of 27.3 l l-1 h) and non-filtered air with additional extra ozone (NF++, accumulated daylight AOT40 of 120 l l-1 h). The birch saplings, including the roots, were harvested after the first and second growing seasons. After the first growing season, the NF++ treatment reduced the total wood biomass by 22%, relative to the NF treatment. There was no further reduction of the total wood biomass in the NF++ treatment after the second growing season. The root biomass was reduced by 30% after the first growing season. The shoot/root ratio, as well as the proportional biomass of leaves, were increased by ozone during both years. The ozone impact on the relative growth rate was estimated to -2% per 10 l l-1 h daylight AOT40 per growing season.     

Chlorination of bisphenol A: kinetics and by-products formation

The kinetics of initial chlorination of bisphenol A (BPA) was studied between pH 2 and 11 at room temperature (20 +/- 2 degrees C). pH Profile of the apparent second-order rate constant of the reaction of BPA with chlorine were modeled considering the elementary reactions of HOCl with BPA species and an acid-catalyzed reaction. The predominant reactions at near neutral pH were the reactions of HOCl with the two phenolate species of BPA (k = 3.10 x 10(4) M(-1)s(-1) for BPA- and 6.62 x 10(4) M(-1) s(-1) for BPA(2-)). At near neutral pH, half-life times of BPA were calculated to be less than 1.5 h for chlorine residual higher than 0.2 mg l(-1). Chlorination of synthetic treated waters spiked with BPA showed that BPA disappeared within 4 h and that chlorinated bisphenol A congeners were rapidly formed and remained in solution for up to 10-20 h when low chlorine dosages are applied (0.5-1 mg l(-1)). To limit their presence in drinking water networks, it is then necessary to maintain high chlorine residuals that rapidly produce and decompose chlorinated bisphenol A congeners.     

ESPR subject area 5 ‘Environmental Microbiology, (Bio)Technologies, Health Issues’

Goal, Scope and Background  Aquaculture activities are well known to be the major contributor to the increasing level of organic waste and toxic compounds in the aquaculture industry. Along with the development of intensive aquaculture in China, concerns are evoked about the possible effects of everincreasing aquaculture waste both on productivity inside the aquaculture system and on the ambient aquatic ecosystem. Therefore, it is apparent that appropriate waste treatment processes are needed for sustaining aquaculture development. This review aims at identifying the current status of aquaculture and aquaculture waste production in China. Main Features  China is the world’s largest fishery nation in terms of total seafood production volume, a position it has maintained continuously since 1990. Freshwater aquaculture is a major part of the Chinese fishery industry. Marine aquaculture in China consists of both land-based and offshore aquaculture, with the latter mostly operated in shallow seas, mud flats and protected bays. The environmental impacts of aquaculture are also striking. Results  Case studies on pollution hot spots caused by aquaculture have been introduced. The quality and quantity of waste from aquaculture depends mainly on culture system characteristics and the choice of species, but also on feed quality and management. Wastewater without treatment, if continuously discharged into the aquatic environment, could result in remarkable elevation of the total organic matter contents and cause considerable economy lost. Waste treatments can be mainly classified into three categories: physical, chemical and biological methods. Discussion  The environmental impacts of different aquaculture species are not the same. New waste treatments are introduced as references for the potential development of the waste treatment system in China. The most appropriate waste treatment system for each site should be selected according to the sites’ conditions and financial status as well as by weighing the advantages and disadvantages of each system. Strategies and perspectives for sustainable aquaculture development are proposed, with the emphasis on environmental protection. Conclusions  Negative effects of waste from aquaculture to aquatic environment are increasingly recognized, though they were just a small proportion to land-based pollutants. Properly planned use of aquaculture waste alleviates water pollution problems and not only conserves valuable water resources but also takes advantage of the nutrients contained in effluent. It is highly demanding to develop sustainable aquaculture which keeps stocking density and pollution loadings under environmental capacity. Recommendations and Perspectives  The traditional procedures for aquaculture waste treatment, mainly based on physical and chemical means, should be overcome by more site-specific approaches, taking into account the characteristics and resistibility of the aquatic environment. Further research needs to improve or optimize the current methods of wastewater treatment and reuse. Proposed new treatment technology should evaluate their feasibility at a larger scale for practical application. ESS-Submission Editor: Dr. Ding Wang (wangd@ihb.ac.cn)     

Cobalt-based alumina pillared zirconium phosphate catalysts for the selective catalytic reduction of NO by propane

A series of cobalt containing alumina pillared zirconium phosphate materials have been prepared by ion exchange or by impregnation, and fully characterised. The catalytic behaviour of these materials in the selective catalytic reduction of NO by propane, in excess of oxygen, at temperatures ranging between 350 and 550 degrees C, has been also evaluated. A maximum NO conversion close to 14% is obtained on Co-impregnated catalysts heated at 600 degrees C. The NO reduction seems to be related to the presence of Co3+, thus the calcination temperature of samples influences the resulting activity much more than the cobalt content.     

Concentrations of cadmium and other metals in Fucus vesiculosus L. and Fontinalis dalecarlica Br. Eur. from the northern Baltic Sea and the southern Bothnian Sea

Concentrations of Cd and ten other metals (Al, Co, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn) were determined in the brown seaweed Fucus vesiculosus L. and the aquatic moss, Fontinalis dalecarlica Br. Eur. from the northern Baltic Sea and the southern Bothnian Sea. Elevated concentrations of metals were found in samples taken close to densely populated areas, such as Stockholm and Nyn?shamn. Very high concentrations of especially Zn were found in both Fucus and Fontinalis samples taken from the area south of the Gulf of G?vle. The results indicate that mining and industrial activities along the river Dal?lven are the main sources of Zn and several other metals. Cd concentrations in Fucus plants reached maximum values (24.5 mg kg(-1)) at the northern site. The gradual increase of Cd concentrations in Fucus plants northward could not be totally explained by the salinity gradient in the Baltic Sea; reasons for this are discussed in this paper.     

Comparison of vehicle exhaust emissions from modified diesel fuels

Three diesel fuels, one oil sand-derived (OSD) diesel serving as base fuel, one cetane-enhanced base fuel, and one oxygenate [diethylene glycol dimethyl ether (DEDM)]-blended base fuel, were tested for their emission characterizations in vehicle exhaust on a light-duty diesel truck that reflects the engine technology of the 1994 North American standard. Both the cetane-enhanced and the oxygenate-blended fuels were able to reduce regulated [CO, particulate matter (PM), total hydrocarbon (THC)] and nonregulated [polyaromatic hydrocarbons (PAHs), carbonyls, and other volatile organic chemicals] emissions, except for nitrogen oxides (NO(x)), compared with the base fuel. Although burning a fuel that contains oxygen could conceivably yield more oxygenated compounds in emissions, the oxygenate-blended diesel fuel resulted in reduced emissions of formaldehyde along with hydrocarbons such as benzene, 1,3-butadiene, and PAHs. Reductions in nitro-PAH emissions have been observed in both the cetane-enhanced and oxygenated fuels. This further demonstrates the benefits of using a cetane enhancer and the oxygenated fuel component.     

A voltammetric screening method to determine ronidazole in bovine meat

Abstract

An original voltammetric screening method, employing glassy carbon electrode (GCE) with the differential-pulse voltammetry technique (DPV), has been developed to determine residues of the anti-parasitic agent Ronidazole (RNZ) in bovine meat. By using cyclic voltammetry (CV), it has been demonstrated that an irreversible cathodic process occurs at approximately ?0.740?V (vs. Ag|AgCl, KCl 3?mol L^?1) in a 0.100?mol L^?1 phosphate buffer at pH 6.5 as supporting electrolyte. Furthermore, the behavior of RNZ in CV indicates the occurrence of a diffusion mass transfer process to the working electrode surface. The RNZ reduction mechanism was proposed as a 6-electron transfer, similar to Metronidazole under the same pH range. Quantification of RNZ and method validation were then carried out by DPV. The relative standard deviation (RSD) were 3.21% for intraday precision of 10 consecutive repetitions and 6.78% for interday precision after five analysis. Limits of detection and quantification were also obtained, and the values were 0.107 and 0.358?mg kg^?1, respectively. The recovery percentage for three different concentrations of RNZ in the bovine meat matrix ranged between 98.1% and 100.3%. The method proved to be efficient for screening RNZ in bovine meat.     

Effects of the phenylurea herbicide isoproturon on periphytic diatom communities in freshwater indoor microcosms

The toxic effects of the phenylurea herbicide Isoproturon -IPU: (3-(4-isopropylphenyl)-1, 1-dimethylurea)-were studied on the colonization of periphytic diatom communities, within indoor microcosms consisting of a mixed biotope (water column and natural sediment) and two biological species-rooted macrophyte cuttings (Elodea densa) and benthic bivalve molluscs (Corbicula fluminea). The periphyton, essentially composed of diatoms, was collected on artificial substrata (glass slides) in the upper layers of the water column, after two periods of exposure (34 and 71 days). IPU was initially added in the water or in the sediment compartment, at two nominal concentrations (L1 and L2 levels) for each contamination source-5 and 20 microg litre(-1) and 100 and 400 microg kg(-1) in sediment (w/w) respectively. The effects of IPU on the density and community structure of periphytic diatoms are described. A marked reduction in the diatom density was observed after 34 days exposure to the lower concentration of IPU in the water (5 microg litre(-1)). For the L2 levels, the very small number of live cells present did not permit quantification of the diatom density. After 71 days, recovery in community parameters occurred for the two contamination levels of the sediment and water column sources. Samples collected in the experimental units contaminated with the L2 levels were dominated by heterotrophic and smaller diatom species, such as Sellaphora seminulum. Data treatment based on factorial discriminant analysis enabled us to distinguish the different contamination conditions, with only 11 species from the 130 taxa identified.