Use of thermal analysis techniques (TG-DSC) for the characterization of diverse organic municipal waste streams to predict biological stability prior to land application

The use of organic municipal wastes as soil amendments is an increasing practice that can divert significant amounts of waste from landfill, and provides a potential source of nutrients and organic matter to ameliorate degraded soils. Due to the high heterogeneity of organic municipal waste streams, it is difficult to rapidly and cost-effectively establish their suitability as soil amendments using a single method. Thermal analysis has been proposed as an evolving technique to assess the stability and composition of the organic matter present in these wastes. In this study, three different organic municipal waste streams (i.e., a municipal waste compost (MC), a composted sewage sludge (CS) and a thermally dried sewage sludge (TS)) were characterized using conventional and thermal methods. The conventional methods used to test organic matter stability included laboratory incubation with measurement of respired C, and spectroscopic methods to characterize chemical composition. Carbon mineralization was measured during a 90-day incubation, and samples before and after incubation were analyzed by chemical (elemental analysis) and spectroscopic (infrared and nuclear magnetic resonance) methods. Results were compared with those obtained by thermogravimetry (TG) and differential scanning calorimetry (DSC) techniques. Total amounts of CO₂ respired indicated that the organic matter in the TS was the least stable, while that in the CS was the most stable. This was confirmed by changes detected with the spectroscopic methods in the composition of the organic wastes due to C mineralization. Differences were especially pronounced for TS, which showed a remarkable loss of aliphatic and proteinaceous compounds during the incubation process. TG, and especially DSC analysis, clearly reflected these differences between the three organic wastes before and after the incubation. Furthermore, the calculated energy density, which represents the energy available per unit of organic matter, showed a strong correlation with cumulative respiration. Results obtained support the hypothesis of a potential link between the thermal and biological stability of the studied organic materials, and consequently the ability of thermal analysis to characterize the maturity of municipal organic wastes and composts.     

Comparative Biodegradation Study of Starch- and Polylactic Acid-Based Materials

The degradation of starch- and polylactic acid-based plastic films by microorganisms extracted from compost was studied in a liquid medium. The various degradation products produced were measured throughout the duration of the experiment, and total carbon balances were estimated. For an easily biodegradable material, the evolution of the way carbon repartitioned between different degradation products was quite similar whatever the experimental condition or the type of substrate. On the other hand, for a resistant material exposed to these microorganisms, the nature of the biodegradation depended strongly on the experimental conditions. In the latter case, a differential scanning calorimetry analysis confirmed the importance of the applied norm on the state of the residual material. The consequences for improved methods of estimation of biodegradability of these materials are discussed.     

Oviposition strategies of conifer seed chalcids in relation to host phenology

Insects are considered the most important predators of seed cones, the female reproductive structures of conifers, prior to seed dispersal. Slightly more than 100 genera of insects are known to parasitize conifer seed cones. The most diverse (i.e., number of species) of these genera is Megastigmus (Hymenoptera: Torymidae), which comprises many important seed pests of native and exotic conifers. Seed chalcids, Megastigmus spp., lay eggs inside the developing ovules of host conifers and, until recently, oviposition was believed to occur only in fertilized ovules. Ovule development begins just after pollination, but stops if cells are not fertilized. The morphological stage of cone development at the time of oviposition by seed chalcids has been established for many species; however, knowledge of ovule development at that time has been documented for only one species, M. spermotrophus. Megastigmus spermotrophus oviposits in Douglas-fir ovules after pollination but before fertilization. Unlike the unfertilized ovules, those containing a M. spermotrophus larva continue to develop, whether fertilized or not, stressing the need to broaden our understanding of the insect–plant interactions for this entire genus. To achieve this task, we reviewed the scientific literature and assembled information pertaining to the timing of oviposition and to the pollination and fertilization periods of their respective host(s). More specifically, we were searching for circumstantial evidence that other species of Megastigmus associated with conifers could behave (i.e., oviposit before ovule fertilization) and impact on female gametophyte (i.e., prevent abortion) like M. spermotrophus. The evidence from our compilation suggests that seed chalcids infesting Pinaceae may also oviposit before ovule fertilization, just like M. spermotrophus, whereas those infesting Cupressaceae seemingly oviposit after ovule fertilization. Based on this evidence, we hypothesize that all species of Megastigmus associated with Pinaceae can oviposit in unfertilized ovules, whereas those exploiting Cupressaceae cannot, and thus oviposit only in already fully developed fertilized seeds. Furthermore, we predict that the presence of a larva in unfertilized ovules of all Pinaceae will influence the development of the female gametophyte by preventing its abortion. This influence on the Pinaceae can be interpreted as an ability to parasitize any of the potential seeds present in a seed cone, and as such represents a much more efficient oviposition strategy than searching and locating only fertilized seeds. Concomitantly, this ability has likely led to an overestimation of the impact of the species of seed chalcid infesting Pinaceae on seed production.     

A new C12 alcohol identified as a sex pheromone and a trail-following pheromone in termites: the diene (<Emphasis Type="Italic">Z</Emphasis>,<Emphasis Type="Italic">Z</Emphasis>)-dodeca-3,6-dien-1-ol

The diunsaturated C12 alcohol (Z,Z)-dodeca-3,6-dien-1-ol (dodecadienol) has been characterized by GC-MS and FTIR as a novel releaser pheromone in termites. This alcohol identified in Ancistrotermes pakistanicus (Termitidae, Macrotermitinae) possesses a double pheromonal function which again illustrates the chemical parsimony of termites compared with other social insects. In workers, dodecadienol elicits trail-following at a very low concentration (activity threshold at 0.1 pg/cm of trail); in male alates it induces trail-following at a low concentration (1–10 pg/cm) and sexual attraction at a higher concentration (about 1 ng). Traces of the monounsaturated C12 alcohol (Z)-dodec-3-en-1-ol (dodecenol), known as a trail pheromone of several Macrotermitinae, were also found in the sternal gland extracts of A. pakistanicus, although only dodecadienol was present at the surface of the sternal gland. Workers of A. pakistanicus are not sensitive to dodecenol, but they are as sensitive to dodecatrienol as to dodecadienol. However, in the study area (Vietnam), A. pakistanicus is living in sympatry only with those Macrotermitinae using dodecenol as a trail pheromone, the foraging populations therefore being well isolated through their respective trail pheromones. The presence of three types of unsaturated C12 alcohols as releaser pheromones in the only Macrotermitinae subfamily is discussed, and a possible biosynthetic pathway from linoleic acid is proposed for dodecadienol.     

Cadmium and methylmercury bioaccumulation by nymphs of the burrowing mayflyHexagenia rigida from the water column and sediment

Based on a three compartment microcosm-water column, natural sediment,Hexagenia rigida nymphs-an experimental study was set up to compare cadmium (Cd) and methylmercury (MeHg) bioaccumulation by a burrowing mayfly species, after exposure via the water column or the sediment as initial contamination sources. Results from a wide concentration range for each exposure condition revealed very marked differences between the two metals: MeHg was readily accumulated from the two contamination sources, leading to important metal concentrations in the nymphs after the 2 weeks’ exposure; Cd bioaccumulation, on the other hand, was negligible when the metal was added to the water compartment, even though significant transfers were observed from the sediment source. The average Cd concentrations in the nymphs were proportional to the sediment contamination levels. Turbidity measurements in the water column, reflecting the bioturbation activity of the nymphs, revealed that the effect of Cd was significant, but only when the metal was initially added to the sediment. The results are discussed according to the uptake routes and the structural and functional properties of the biological barriers involved (gills and gut).     

Formation and inhibition of chloroaromatic micropollutants formed in incineration processes

The formation pathways for chlorinated aliphatic and chlorinated aromatic compounds in technical incineration processes are reviewed. It is shown that acetylene is converted to chloroaromatic compounds including PCDD/F in a special flow reactor by catalytic activity of CuCl2 in the temperature regime of a post-combustion zone of technical incinerators. Mechanistic pathways begin with chlorination of acetylene. Dichloroacetylene is further condensed to C-4 and C-6 units. Hexachlorobenzene is the dominant aromatic compound and a likely precursor to chlorinated phenols and PCDD/F. Two specific mechanisms of formation of chlorinated aromatic compounds including PCDD/F have been advanced. Both mechanisms begin with the formation of dichloroacetylene from flame pyrolysis products like acetylene. Condensation of dichloroacetylene is mediated by copper species via metallacyclic intermediates and/or a catalytic cycle involving copper stabilized trichlorovinyl radicals. The final pathways of conversion of chlorinated benzenes to PCDD/F via chlorophenols are under active investigation.     

Migration of contaminants through the unsaturated zone overlying the Hesbaye chalky aquifer in Belgium: a field investigation

This paper presents the results of a detailed field investigation that was performed for studying groundwater recharge processes and solute downward migration mechanisms prevailing in the unsaturated zone overlying a chalk aquifer in Belgium. Various laboratory measurements were performed on core samples collected during the drilling of boreholes in the experimental site. In the field, experiments consisted of well logging, infiltration tests in the unsaturated zone, pumping tests in the saturated zone and tracer tests in both the saturated and unsaturated zones. Results show that gravitational flows govern groundwater recharge and solute migration mechanisms in the unsaturated zone. In the variably saturated chalk, the migration and retardation of solutes is strongly influenced by recharge conditions. Under intense injection conditions, solutes migrate at high speed along the partially saturated fissures, downward to the saturated zone. At the same time, they are temporarily retarded in the almost immobile water located in the chalk matrix. Under normal recharge conditions, fissures are inactive and solutes migrate slowly through the chalk matrix. Results also show that concentration dynamics in the saturated zone are related to fluctuations of groundwater levels in the aquifer. A conceptual model is proposed to explain the hydrodispersive behaviour of the variably saturated chalk. Finally, the vulnerability of the chalk to contamination issues occurring at the land surface is discussed.     

Past, current and future fire frequency in the Canadian boreal forest: implications for sustainable forest management

Over the past decades, there has been an increasing interest in the development of forest management approaches that are based on an understanding of historical natural disturbance dynamics. The rationale for such an approach is that management to favor landscape compositions and stand structures similar to those of natural ecosystems should also maintain biological diversity and essential ecological functions. In fire-dominated landscapes, this approach is possible only if current and future fire frequencies are sufficiently low, comparing to pre-industrial fire frequency, that we can substitute fire by forest management. We address this question by comparing current and future fire frequency to historical reconstruction of fire frequency from studies realized in the Canadian boreal forest. Current and simulated future fire frequencies using 2 and 3 x CO2 scenarios are lower than the historical fire frequency for many sites, suggesting that forest management could potentially be used to recreate the forest age structure of fire-controlled pre-industrial landscapes. There are however, important limitations to the current even-age management.     

Displacement and sweep efficiencies in a DNAPL recovery test using micellar and polymer solutions injected in a five-spot pattern

Soil washing with micellar solutions is a promising alternative for the remediation of DNAPL source zones. As with any flushing technology, the success of soil washing with micellar solutions depends in a very large part on the ability of the solution to contact the contaminant (sweep efficiency) and then on the efficiency of contaminant removal once this contact is made (displacement efficiency). We report here on a field test where a micellar solution was used to recover a DNAPL in an open five-spot pattern in which polymer solutions were also injected before and after the washing solution to improve sweep efficiency. The washing solution formulation was optimised in the laboratory prior to the test to obtain good dissolution capacity. For a high-concentration and low-volume soil flushing remediation test such as the one performed (0.8 pore volumes of actual washing solution injected), slug sizing of the washing solution is critical. It was evaluated by an analytical solution. In a five-spot pattern, the displacement efficiency of the washing solution was observed to vary in the porous medium as a function of the radial distance from the injection well because: (1) the volume of the washing solution flowing through a section of the test cell changes (maximum close to the injection well and minimal at the pumping wells); (2) the in situ velocity changes (maximum at the wells and minimum between the wells) and; (3) the contact time of the washing solution with the NAPL changes as a function of the distance from the injection well. The relative importance of the recovery mechanisms, mobilisation and dissolution, was also observed to vary in the test cell. The reduced velocity increased the contact time of the washing solution with the DNAPL enhancing its dissolution, but the decrease of the capillary number caused less mobilisation. The washing process is much more extensive around the injection well. The use of an injection-pumping pattern allowing a complete sweep of the remediated area is essential. Following a comprehensive characterisation, modeling is an efficient tool to design the injection-pumping scheme and to optimise injection and pumping rates providing the best areal sweep. The vertical sweep can be controlled by using a polymer solution (Xanthan gum). The polymer solution also has a positive effect on front stability between the solutions injected. The injection rate of the polymer solution that follows the washing solution must be kept minimal initially to prevent dilution of the washing solution by fingering.