Remote sensing for land management and planning

The primary role of remote sensing in land management and planning has been to provide information concerning the physical characteristics of the land which influence the management of individual land parcels or the allocation of lands to various uses These physical characteristics have typically been assessed through aerial photography, which is used to develop resource maps and to monitor changing environmental conditions These uses are well developed and currently well integrated into the planning infrastructure at local, state, and federal levels in the United States.Many newly emerging uses of remote sensing involve digital images which are collected, stored, and processed automatically by electromechanical scanning devices and electronic computers Some scanning devices operate from aircraft or spacecraft to scan ground scenes directly; others scan conventional aerial transparencies to yield digital images. Digital imagery offers the potential for computer-based automated map production, a process that can significantly increase the amount and timeliness of information available to land managers and planners.Future uses of remote sensing in land planning and management will involve geographic information systems, which store resource information in a geocoded format. Geographic information systems allow the automated integration of disparate types of resource data through various types of spatial models so that with accompanying sample ground data, information in the form of thematic maps and/ or aerially aggregated statistics can be produced Key issues confronting the development and integration of geographic information systems into planning pathways are restoration and rectification of digital images, automated techniques for combining both quantitative and qualitative types of data in information-extracting procedures, and the compatibility of alternative data storage modes     

PATTERNS OF SUSPENDED SEDIMENT TRANSPORT IN A COASTAL ALASKA STREAM1

Suspended sediment data from a 154 ha watershed on northeast Chichagof Island, Alaska, were collected over three fall storm seasons from 1980 to 1982. Sediment rating curves for nine pooled storms explained less than 34 percent of the variation in total suspended solids (TSS). Significantly higher concentrations of suspended sediment occurred during the rising limb of storm hydrographs than for similar flows on the falling limb, accounting for hysteresis loops in TSS versus streamflow plots for individual storms. These hysteresis loops were wider during early season storms, indicating that easily transportable fine sediment may have been flushed from the upper portion of channel banks and from behind large organic debris during early season peak flows. Regression relationships (TSS versus Q) developed for the highest stormflows (> 1 m³/s) had steeper slopes than the lower stormflows (< 1 m³/s). Turbidity correlated well (r=0.94) with TSS for all storm-flow data combined. Organic matter constituted an average of 35 percent (by weight) of TSS for all water quality samples.     

The relationship between blend miscibility and biodegradation of cellulose acetate and poly(ethylene Succmate) blends

The miscibility of cellulose acetate (CA; degree of substitution = 2.5) and poly(ethylene succinate) (PES) has been investigated using a variety of thermal techniques and by solid-state carbon13 NMR spectroscopy. The blends containing greater than ca. 70% CA were found to be miscible. In the case of blends containing less than ca. 70% CA, a combination of thermal and NMR analyses suggests that these blends are not fully miscible on a 2.5- to 5-nm scale. On the scale which can be probed by dynamic mechanical thermal analysis (15 nm), the low-percentage CA blends exhibit “significant local concentration fluctuations≓. Investigation of the biodegradation of the blend components and of the blends revealed that PES degraded relatively rapidly and that CA degraded slowly. The blends degraded at a rate essentially identical to that of CA. Miscibility (75% CA blend) or crystallization of PES (30% CA blend) had no significant effect. These data suggest that a significant mode of degradation ófPES during composting involves chemical hydrolysis of the polymer followed by biological assimilation of monomers. Degradation of the blends is initiated in the amorphous phase. Because CA is a significant component of the amorphous phase, a small amount of CA significantly impacts the biodegradation rates of the blends.     

Synthesis of3H- polyethylene and its use for fate studies on degradable plastics

Determining the fate of xenobiotic materials in the environment can be aided by the use of radioactive isotope technology. Previous research on the degradation of polymers such as polyethylene (PE) was aided by the utilization of radiotracers. In order to study the environmental fate of degradable (PE/starch) plastics, we synthesized³H-labeled PE. Results of soil incubation studies indicate that only minimal degradation of the PE component, as indicated by the production of water-soluble metabolites, occurred during 2 years of incubation in soil. Despite the minimal degradation, the³H label did not allow for detection of the degradation products. In addition, the³H-PE was particularly useful for tracing the fate of degradable plastics after consumption by terrestrial isopods. The detection of aqueous-soluble radioactivity in isopod frass was used to indicate degradation of the plastic film.     

Mapping sediment contamination and toxicity in Winter Quarters Bay,McMurdo Station,Antarctica

Winter Quarters Bay (WQB) is a small embayment located adjacent to McMurdo Station, the largest researchbase in Antarctica. The bay is approximately 250 m wide andlong, with a maximum depth of 33 m. Historically, trashfrom the McMurdo Station was piled on the steep shoreline ofWQB, doused with fuel and ignited. That practice hasceased, and the adjacent land area has been regraded tocover the residual waste. The bottom of WQB remainslittered with drums, equipment, tanks, tires, cables, andother objects, especially the southeastern side of the baywhere dumping took place. Sediments are contaminated withPCBs, metals, and hydrocarbon fuels. The objectives of this study were to map the distributionof organic contaminants in WQB, assess the toxicity of WQB sediments using a simple microbial test, anddetermine correlations between toxicity and contaminantlevels. The study suggests that adverse ecological effectshave occurred from one or more of the contaminants found inWQB but the source of the toxic impacts to bay sedimentsremains unknown. Whole sediment toxicity was onlycorrelated with oil-equivalent while solvent extracts ofsediments were correlated with PAHs and oil-equivalent. Theauthors recommend that an integrated research plan bedeveloped that focuses on determining what additionalinformation is needed to make informed decisions on possibleremediation of WQB.     

Dioxins and polychlorinated biphenyls (PCDD/Fs and PCBs) in food from farms close to foot and mouth disease animal pyres

To control the outbreak of foot and mouth disease, which occurred in the UK in early 2001, a large number of farm animals were slaughtered. Where it was not possible to render or landfill the carcasses, they were destroyed by burning on open pyres, with wood, coal and other materials. Uncontrolled combustion such as this is known to produce small quantities of dioxins and an investigation was made into whether, as a result of the burning, there was an elevation in the concentrations of these compounds in food produced in the areas close to the pyres. With few exceptions, concentrations of PCDD/Fs and PCBs were within the expected ranges as predicted by reference data. No accumulation over time was evident from a repeat milk sampling exercise. Where elevated concentrations of PCDD/Fs and PCBs were found in chickens and eggs, they were in samples not destined for the food chain. Elevated levels in some samples of milk from Dumfries and Galloway were not found in earlier or later samples and may have been found as a result of a temporary feeding regime. Elevated concentrations in lamb from Carmarthenshire were from very young animals which would not have entered the food chain. There was no evidence of any significant increase in dietary exposure to PCDD/Fs and PCBs as a result of the FMD pyres.     

The corporate impact of addressing social issues: a financial case study of a project in Peru

Large, multinational resource development projects can affectmany aspects, including social, economic and ecological realities, in the regions where they operate. Social and environmental issues that are usually ignored in such projectsare increasingly affecting the financial future of multinationalcorporations in negative ways. In this article, we advance the argument that corporations can successfully manage these issuesand that if they choose to view these management efforts as an investment rather than an expense, they may well acquire a competitive advantage over companies that do not. We describe asa case study the Camisea natural gas and condensates developmentproject in Peru, operated by Shell Prospecting and Development Peru (SPDP). Camisea is one of the first projects anywhere inthe world to conduct a detailed analysis of key industry-relatedsocial issues and the processes, required investment and financial impact of managing them. The Camisea example supportsthe argument that addressing social and environmental concerns makes financial sense. In present value terms, the benefit ofmanaging these concerns was expected to surpass the cost investment by approximately US$50 million.