Lead reduces shell mass in juvenile garden snails (Helix aspersa)

In an earlier paper examining inherited tolerance to Pb, the shell growth of laboratory-bred offspring of Helix aspersa from contaminated sites was compared with that ofjuveniles from naive populations on dosed and undosed diets. Eight-week-old snails were fed either 500 microg g(-1) Pb or a control food in competitive trials between two populations. In the first series of trials, a parental history of exposure to Pb did not confer any advantage to either of two populations (BI and MI) competing with a na?ve population (LE). whether Pb was present in the diet or not. However, in the analysis of their metal concentrations reported here, LE are found to retain higher levels of Pb in the soft tissues than either BI or MI. Compared to their siblings on the unleaded diet, dosed LE and BI juveniles had lower soft tissue concentrations of Ca and Mg. Although the growth in shell height is unaffected by diet, LE and BI juveniles build lighter shells on the Pb-dosed diet, achieving around 75% of the shell mass of their controls. In contrast, the shell weights of dosed MI juveniles are depressed by only 15% and show no change in the essential metal concentrations of their soft tissues. A second experiment using five populations fed only the dosed food show that the shell weight/soft tissue weight ratios are comparable to the dosed snails of the previous experiment. Building a lighter shell thus appears to be the common response of all Helix populations to a high Pb diet, at least amongst juveniles. The reduction in its mass means that less Ca and Mg is added to the shell and, along with the lowered soft tissue concentrations observed in some populations. may be a consequence of an increased effort to excrete Pb. The possibility that the MI population shows a genotypic adaptation. perhaps as some form of modification of its Ca metabolism, is briefly discussed.     

Twenty-Six Years of Green Turtle Nesting at Tortuguero, Costa Rica: An Encouraging Trend

The green turtle ( Chelonia mydas ) population that nests at Tortuguero, Costa Rica, is the largest in the Atlantic by at least an order of magnitude. Surveys to monitor the nesting activity on the northern 18 km of the 36-km beach were initiated in 1971 and extended to the entire beach in 1986. From the survey data, we estimated the total number of nesting emergences on the northern 18 km for each year from 1971 through 1996. Evaluation of the trend in nesting emergences indicated a relatively consistent increase from 1971 to the mid-1980s, constant or perhaps decreasing nesting during the late 1980s, and then resumption of an upward trend in the 1990s. Evaluation of trends in sea turtle nesting populations requires many years of data because of the large degree of annual variation in nesting numbers. The trends reported in this study must be evaluated with caution for several reasons. First, if the mean number of nests deposited by each female each year (clutch frequency) varies significantly among years, changes in the number of nesting emergences among years could reflect changes in the number of nesting females, clutch frequency, or both. Second, we only assessed the trend in one segment of the population (mature females), which may or may not represent the trend of the entire green turtle population and which, because of late maturity, may not reflect changes in juvenile mortality for many years. Third, survey frequency, and thus confidence in annual estimates, varied among years. The upward population trend must be assessed from the perspective of the catastrophic decline that the Caribbean green turtle populations have experienced since the arrival of Europeans. If careful management is continued in Costa Rica and adopted throughout the region, the collapse of the Caribbean green turtle populations—which seemed imminent in the 1950s—can be avoided.     

Characterizing and Controlling Industrial Dust: A Case Study in Small Particle Measurement

Instrumentation used to measure characteristics of fine particles entrained in gas or suspended in aerosols provides information needed to develop valid regulations for emission sources and to support the design of control technologies. This case study offers a brief history of micromeritics, a term used by early researchers to describe the science of small particles, and the related invention of laboratory instruments for characterizing very fine particles. The historical view provides insights into the role that Progressive Era government agencies played in advancing esoteric science and applying this knowledge to the regulation of workplace air pollution. Micromeritics instrumentation developed in conjunction with federal research now has many commercial applications worldwide, with characterizing airborne pollutants only a minor one. However, the continuing advances in the micromeritics field provide important laboratory measurement capabilities to environmental research organizations, such as the National Institute for Occupational Safety and Health (NIOSH).     

Country specific low carbon commitments versus equitable and practical company specific decarbonisation targets

Environment, Development and Sustainability - Concerns about the impact of climate change and the need for stabilising a global temperature rise to below 2 degrees Celsius are driving the...     

Interactions between biological and abiotic pathways in the reduction of chlorinated solvents

While biologically mediated reductive dechlorination continues to be a significant focus of chlorinated solvent remediation, there has been an increased interest in abiotic reductive processes for the remediation of chlorinated solvents. In situ chemical reduction (ISCR) uses zero‐valent iron (ZVI)–based technologies, such as nanoscale iron and bimetallic ZVI, as well as naturally occurring reduced minerals incorporating dual‐valent iron (DVI), such as magnetite, green rust, and iron sulfides that are capable of dechlorinating solvents. A more recent area of development in ISCR has been in combining biological and abiotic processes. There are several ways in which biological and abiotic processes can be combined. First, the interaction between the two may be “causative.” For example, the Air Force Center for Engineering and the Environment's biogeochemical reductive dechlorination (BiRD) technology combines a mulch barrier with hematite and gypsum to create an iron‐sulfide‐based reducing zone. Biodegradation under sulfate‐reducing conditions produces sulfide that combines with the hematite to form iron sulfides. As such, the BiRD technology is “causative”; the biological processes create reducing minerals. The biological generation of other reducing minerals such as magnetite, siderite, and green rust is feasible and is, with magnetite, observed in nature at some petroleum sites. A second type of interaction between abiotic and biotic processes is “synergistic.” For example, biological processes can enhance the activity of reduced metals/minerals. This is the basis of the EHC® ISCR technologies, which combine ZVI with a (slowly) degradable carbon substrate. This combination rapidly creates buffered, strongly reducing conditions, which result in more complete solvent degradation (i.e., direct mineralization). The extent and level of reducing activity commonly observed are much greater when both the carbon substrate and the ZVI are present. When the carbon substrate is expended, the reducing activity due to ZVI alone is much less. The understanding of biogeochemical processes and their impact on abiotic processes is still developing. As that understanding develops, new and improved methods will be created to enhance volatile organic compound destruction. © 2009 Wiley Periodicals, Inc.     

Monitoring an outdoor smoking area by means of PM<Subscript>2.5</Subscript> measurement and vegetal biomonitoring

The extension of pollutant accumulation in plant leaves associated with its genotoxicity is a common approach to predict the quality of outdoor environments. However, this approach has not been used to evaluate the environmental quality of outdoor smoking areas. This study aims to evaluate the effects of environmental tobacco smoke (ETS) by assessing particulate matter 2.5 μm (PM_2.5) levels, the pollen abortion assay, and trace elements accumulated in plant leaves in an outdoor smoking area of a hospital. For this, PM_2.5 was measured by active monitoring with a real time aerosol monitor for 10 days. Eugenia uniflora trees were used for pollen abortion and accumulated element assays. Accumulated elements were also assessed in Tradescantia pallida leaves. The median concentration of PM_2.5 in the smoking area in all days of monitoring was 66 versus 34 μg/m³ in the control area (P?<?0.001). In addition, the elements Al, Cd, Cu, Ni, Pb, Rb, Sb, Se, and V in Tradescantia pallida and Al, Ba, Cr, Cu, Fe, Mg, Pb, and Zn in Eugenia uniflora were in higher concentration in the smoking area when compared to control area. Smoking area also showed higher rate of aborted grains (26.1?±?10.7 %) compared with control (17.6?±?4.5 %) (P?=?0.003). Under the study conditions, vegetal biomonitoring proved to be an effective tool for assessing ETS exposure in outdoor areas. Therefore, vegetal biomonitoring of ETS could be a complement to conventional analyses and also proved to be a cheap and easy-handling tool to assess the risk of ETS exposure in outdoor areas.     

Temporal and spatial relationships in fine particle strong acidity, sulphate, PM1O, and PM2.5 across multiple canadian locations

The Canadian Acid Aerosol Measurement Program (CAAMP) was established in 1992 to gain a better understanding of the atmospheric behaviour of fine particle strong acidity (“acid aerosols”) and to facilitate an assessment of the potential health risks associated with acid aerosols and particles in general. During 1992. 1993 and 1994, annular denuder and filter measurements were taken at four sites in Ontario, two in Quebec, three in the Atlantic Provinces and one in the greater Vancouver area. Mean fine particle sulphate concentrations (SO₄²⁻) were highest in southern Ontario (annual average ranged from 40–70 nmol m⁻³), lowest at a site in the Vancouver area (average = 16 nmol m⁻³) and second lowest in rural Nova Scotia. However, mean fine particle strong acid concentrations (H⁺) were geographically different. The highest mean concentrations were at the east coast sites (annual average of up to 30 nmol m⁻³). Acidities were lower in areas where the fine particle acidity experienced greater neutralization from reaction with ammonia. This included the major urban centres (i.e. Toronto and Montréal) and areas with greater amounts of agricultural activity, as in rural southern Ontario. On average, ambient concentrations of fine and coarse particle mass were larger in the urban areas and also in areas where SO₄²⁻ levels were higher. All the particle components were episodic. However, compared to SO₄²⁻ and fine particles (PM_2.5 or PM_2.1, depending upon inlet design), episodes of H⁺ tended to be less frequent and of shorter duration, particularly in Ontario. Saint John, New Brunswick, had the highest mean annual H⁺ concentration, which was 30 nmol m⁻³. H⁺ episodes (24 h concentration > 100 nmol m⁻³) were also the most frequent at this location. The high levels in Saint John were partially due to local sulphur dioxide sources and heterogeneous chemistry occurring in fog, which, on average, led to a 50% enhancement in sulphate, relative to upwind conditions.There was a substantial amount of intersite correlation in the day to day variations in H⁺, SO₄²⁻ , PM_2.5 and PM₁₀ (fine + coarse particles) concentrations, which is due to the influence of synoptic-scale meteorology and the relatively long atmospheric lifetime of fine particles. Sulphate was the most regionally homogenous species. Pearson correlation coefficients comparing SO₄²⁻ between sites ranged from 0.6 to 0.9, depending on site separation and lag time. In many cases, particle episodes were observed to move across the entire eastern portion of Canada with about a two-day lag between the SO₄²⁻ levels in southern Ontario and in southern Nova Scotia.     

Displaced honey bees perform optimal scale-free search flights

Honey bees (Apis mellifera) are regularly faced with the task of navigating back to their hives from remote food sources. They have evolved several methods to do this, including compass-directed "vector" flights and the use of landmarks. If these hive-centered mechanisms are disrupted, bees revert to searching for the hive, but the nature and efficiency of their searching strategy have hitherto been unknown. We used harmonic radar to record the flight paths of honey bees that were searching for their hives. Our subsequent analysis of these paths revealed that they can be represented by a series of straight line segments that have a scale-free, Lévy distribution with an inverse-square-law tail. We show that these results, combined with the "no preferred direction" characteristic of the segments, demonstrate that the bees were flying an optimal search pattern. Lévy movements have already been identified in a number of other animals. Our results are the best reported example where the movements are mostly attributable to the adoption of an optimal, scale-free searching strategy.