Environmental remediation processes by zero valence copper: reaction mechanisms

Environmental Science and Pollution Research - Recent studies have shown Cu(0) as a promising material for the removal of organic and inorganic pollutants. However, there is no review addressing...     

Toxicity evaluation of cypermethrin,glyphosate, and malathion,on two indigenous zooplanktonic species

In Aguascalientes, Mexico, there is a special concern about pesticides because of their intensive use on guava production areas, which are located in the vicinity of water reservoirs; thus, non-target organisms could be exposed. Thereafter, the aim of this work was to assess the effect of cypermethrin, Faena® (glyphosate), and malathion, which are the most used pesticides in Aguascalientes’ guava production, on the indigenous freshwater species Alona guttata (cladoceran) and Lecane papuana (rotifer). Acute 48-h toxicity tests were carried out, and LC₅₀ values were calculated. Then, five sublethal concentrations (1/80, 1/40, 1/20, 1/10, and 1/5 of the respective LC₅₀) were selected for the chronic assays: (a) intrinsic growth rate analysis in the rotifer and (b) partial life table analysis in the cladoceran. The results of the acute toxicity tests showed that A. guttata was more sensitive to malathion (LC₅₀ = 5.26 × 10^?3 mg/L) at concentrations found in natural environments with continuous application on guava fields, whereas L. papuana was more sensitive to Faena® (LC₅₀ = 19.89 mg/L). The somatic growth of A. guttata was inhibited for the chronic exposure to cypermethrin. In addition, cypermethrin and Faena® seemed to exert endocrine disruptive effects on A. guttata. Moreover, malathion chronic exposure significantly decreased the survival of A. guttata. Moreover, L. papuana was affected chronically for the three pesticides.     

Water quality assessment using remote sensing techniques: Medrano Creek, Argentina

Two spectral bands of the visible spectrum [0.45-0.52 microm (Blue), 0.52-0.60 microm (Green)] of satellite images obtained by LANDSAT 7 ETM+ have been used in this study to follow the contaminated waters of Medrano Creek when it flows into Río de la Plata River. The former is one of the five fresh watercourses going through the Metropolitan Area of Buenos Aires, Argentina, where 13 million people live. Previous studies have shown that the water quality of Rio de la Plata at the outlet of Medrano Creek has decreased more than 50% as a source of water for human consumption. The non-treated effluents of the textile industry probably affect the water quality. We have developed a model that predicts the water quality index (WQI) of surface waters in the study area and uses linear regression analysis. The model has been validated using a data set of 12 physicochemical parameters obtained during the last 3 years. The potentiality of using satellite images was confirmed by the results: (a) to trace the organic contamination (associated with dyes) in freshwater systems and (b) as tools for decision making in the management of water resources.     

Influence of fenamidone, indoxacarb, pyraclostrobin, and deltamethrin on the population of natural yeast microflora during winemaking of two sardinian grape cultivars

The influence of fenamidone ((S)-1-anilino-4-methyl-2-methylthio-4-phenylimidazolin-5-one), pyraclostrobin (methyl 2-[1-(4-chlorophenyl)pyrazol-3-yloxymethyl]-N-methoxycarbanilate), indoxacarb (methyl 7-Chloro-2,5-dihydro-2-[[(methoxycarbonyl) [4- (trifluoromethoxy) phenyl] amino] carbonyl] indeno[1,2-e][1,3,4] oxadiazine-4a(3H)-carboxylate), and deltamethrin ([cyano-[3-(phenoxy)phenyl]methyl] 3-(2,2-dibromoethenyl)-2,2-dimethylcyclopropane-1-carboxylate) on spontaneous fermentation carried out by natural yeast grapes microflora, was studied during the wine-making process. Aliquots of pesticide standard solutions were added to the grapes before crushing, to reach a concentration equal or half the maximum residue limit (MRL). Vinifications were performed, with maceration (R), or without maceration (W). During the wine-making process, samples were taken at the beginning (one hour after grapes crushing), at the middle and at the end of the spontaneous fermentation process. At half the MRL concentration, deltamethrin affected Pichia sp. population with a decrease of almost 50 %, while fenamidone decreased Candida sp., Candida stellata at 83, and 36%, respectively. Metschnikowia pulcherrima population decreased in all samples when compared to the control. Experiments at MRL levels showed a strong reduction for all non-Saccharomyces yeast species, when grapes had been treated with pyraclostrobin, fenamidone, and deltamethrine, except for Candida sp. which was found to have been affected only by fenamidone residues. Growth zone inhibition test showed only an in vitro activity of pyraclostrobin over Kloeckera spp., C. stellata, and M. pulcherrima. Microvinification experiments produced wines with no differences concerning S. cerevisiae population as well as production of ethanol and residual sugars. Experiments showed that at the end of the fermentation process pesticides were adsorbed by the lees and grape skins, and no pesticides residue was detectable in wine.     

Exposure to major volatile organic compounds and carbonyls in European indoor environments and associated health risk

This paper summarizes recent data on the occurrence of major organic compounds (benzene, toluene, xylenes, styrene, acetaldehyde, formaldehyde, naphthalene, limonene, α-pinene and ammonia, classified by the European Commission's INDEX strategy report as the priority pollutants to be regulated) and evaluates accordingly cancer and non-cancer risks posed by indoor exposure in dwellings and public buildings in European Union (EU) countries. The review process indicated that significant differences in indoor air quality exist within and among the countries where data were available, indicating corresponding differences in sources and emission strength of airborne chemicals, identified or not. Conservative exposure limits were not exceeded for non-carcinogenic effects, except for formaldehyde; for carcinogenic agents the estimated risks were up to three orders of magnitude higher than the one (10(-6)) proposed as acceptable by risk management bodies. However, the risk assessment evaluation process faces crucial difficulties, either due to the relative paucity of indoor air quality measurements in many EU countries, or by the lack of sampling consistency in the already existing studies, indicating the need for additional measurements of indoor air quality following a harmonized sampling and analytical protocol. Additionally, uncertainties embodied in the cancer potency factors and exposure limit values impose further difficulties in substance prioritization and risk management.     

Characterization of the effluent from a nanosilver producing washing machine

The increasing number of nanomaterial based consumer products raises concerns about their possible impact on the environment. This study provides an assessment of the effluent from a commercially available silver nanowashing machine. The washing machine released silver in its effluent at an average concentration of 11μgL(-1), as determined by inductive coupled mass spectrometry (ICP-MS). The presence of silver nanoparticles (AgNPs) was confirmed by single particle ICP-MS as well as ion selective electrode measurements and filtration techniques. Size measurements showed particles to be in the defined nanosize range, with an average size of 10nm measured with transmission electron microscopy (TEM) and 60-100nm determined with nanoparticle tracking analysis (NTA). The effluent was shown to have negative effects on a natural bacterial community as its abundance was clearly reduced when exposed to the nanowash water. If washing machines capable of producing AgNPs become a common feature of households in the future, wastewater will contain significant loadings of AgNPs which might be released into the environment.     

Recycling of WEEE: characterization of spent printed circuit boards from mobile phones and computers

This paper presents a comparison between printed circuit boards from computers and mobile phones. Since printed circuits boards are becoming more complex and smaller, the amount of materials is constantly changing. The main objective of this work was to characterize spent printed circuit boards from computers and mobile phones applying mineral processing technique to separate the metal, ceramic, and polymer fractions. The processing was performed by comminution in a hammer mill, followed by particle size analysis, and by magnetic and electrostatic separation. Aqua regia leaching, loss-on-ignition and chemical analysis (inductively coupled plasma atomic emission spectroscopy - ICP-OES) were carried out to determine the composition of printed circuit boards and the metal rich fraction. The composition of the studied mobile phones printed circuit boards (PCB-MP) was 63 wt.% metals; 24 wt.% ceramics and 13 wt.% polymers; and of the printed circuit boards from studied personal computers (PCB-PC) was 45 wt.% metals; 27 wt.% polymers and ceramics 28 wt.% ceramics. The chemical analysis showed that copper concentration in printed circuit boards from personal computers was 20 wt.% and in printed circuit boards from mobile phones was 34.5 wt.%. According to the characteristics of each type of printed circuit board, the recovery of precious metals may be the main goal of the recycling process of printed circuit boards from personal computers and the recovery of copper should be the main goal of the recycling process of printed circuit boards from mobile phones. Hence, these printed circuit boards would not be mixed prior treatment. The results of this paper show that copper concentration is increasing in mobile phones and remaining constant in personal computers.     

Mesoscale Meteorological Simulations of Summer Ozone Episodes in Mexicali and Monterrey, Mexico: Analysis of Model Sensitivity to Grid Resolution and Parameterization Schemes

Air quality in the Mexican cities of Monterrey, Nuevo Leon, and Mexicali, Baja California, has suffered great detriment in recent years. It is well known that meteorology is one of the main factors affecting the dynamics of pollutants in the atmosphere. Here, the Penn State/NCAR Meteorological Mesoscale Model (MM5) meteorological system was applied to identify meteorological conditions conducive to high-ozone concentrations in such regions. Two summer 2001 ozone episodes for each geographical domain were selected with the aid of a classification and regression tree analysis technique. Model response to changes in its physical parameterization, horizontal grid resolution, and data assimilation schemes were assessed. Once a suitable configuration was selected, performance statistics were computed for model validation. MM5 simulated satisfactorily the meteorology of such episodes, yielding indexes of agreement of 0.4–0.8 for wind speed and 0.67–0.95 for temperature, on average. However, MM5 tended to underestimated temperature and overestimated wind speed. Froude numbers were calculated to analyze the impact of the terrain complexity on wind circulation. It was concluded that in both cities, wind convergence zones might enhance high-ozone concentrations. These results improve our understanding of the atmospheric processes exerting effect on air pollution within these airsheds.     

Metals emitted from heavy-duty diesel vehicles equipped with advanced PM and NOX emission controls

Emission factors for elemental metals were determined from several heavy-duty diesel vehicles (HDDV) of 1998–2007 vintage, operating with advanced PM and/or NO_X emissions control retrofits on a heavy-duty chassis dynamometer, under steady state cruise, transient, and idle conditions. The emission control retrofits included diesel particulate filters (DPF): catalyzed and uncatalyzed, passive and active prototype vanadium- or zeolite-based selective catalytic reduction (SCR) systems, and a catalyzed DPF fitted on a hybrid diesel electric drive vehicle. The prototype SCR systems in combination with DPF retrofits are of particular interest because they represent the expected emissions controls for compliance with PM and NO_X regulations in 2010. PM samples from a full-exhaust dilution tunnel were collected on bulk filters, and on a Personal Cascade Impactor Sampler (PCIS) for total and water-soluble elemental analysis. All the DPFs significantly reduced emissions of total trace elements (>85% and >95% for cruise and for the Urban Dynamometer Driving Schedule (UDDS), respectively). However, we observed differences in the post-retrofit metals emissions due to driving cycle effects (i.e., exhaust temperature) and type of retrofit. In general, the metals emissions over cruise conditions (which leads to higher exhaust temperatures) were substantially different from the emissions over a transient cycle or while idling. For instance, during cruise, we observed higher levels of platinum (1.1 ± 0.6–4.2 ± 3.6 ng km^?1) for most of the retrofit-equipped vehicle tests compared to the baseline configuration (0.3 ± 0.1 ng km^?1). The vanadium-based DPF + SCR vehicle during cruise operation exhibited emissions of vanadium (562 ± 265 ng km^?1) and titanium (5841 ± 3050 ng km^?1), suggesting the possible release of actual SCR wash-coat (V₂O₅/TiO₂) from the catalyst under the higher temperatures characteristic of cruise operation. The vanadium emissions exhibited a bi-modal mass size distribution, with modes at <0.25 μm and 1.0–2.5 μm size ranges for the vanadium-based SCR system. For the DPF + SCR systems, a greater fraction of the metal emissions from the zeolite-based system is water-soluble compared to emissions from the vanadium-based system.