Adaptation of a Canadian culpability scoring tool to Alberta police traffic collision report data

Objective: The objective of this study was to adapt a previously validated Canadian Culpability Scoring Tool (CCST) to Alberta police report data.

Methods: Police traffic collision reports from motor vehicle (MV) collisions in Calgary and Edmonton (Alberta, Canada) from 2010 to 2014 were used. Adaptation of the CCST was completed with input from personnel within Alberta Transportation, contributing to face and content validity. Two research assistants, given only the information necessary for scoring, evaluated 175 randomly selected MV–MV collisions. Interrater agreement was estimated using kappa (k) and reported with 95% confidence intervals (CIs). Discussion of disagreements between the research assistants and consultation from Alberta Transportation informed the algorithm used in the Alberta Motor Vehicle Collision Culpability Tool (AMVCCT). The AMVCCT was automated and applied to all motorists involved in collisions. Binary logistic regression was used to examine characteristics of the culpable and nonculpable drivers and their effects were reported using odds ratios (ORs) with 95% CIs.

Results: Interrater agreement for the random sample was excellent (k = 0.95; 95% CI, 0.92–0.99). Of those drivers hospitalized, 1,130 (37.54%) were rated not culpable and 1,880 (62.46%) were rated culpable. The odds of being culpable were higher for males than for females (OR = 1.43; 95% CI, 1.23–1.66). The odds of being culpable were higher in those impaired by alcohol than those considered “apparently normal” (OR = 61.10; 95% CI, 22.66–164.75). The odds of being deemed culpable, when compared with drivers >54 years old, were higher for those <25 years old (OR = 1.72; 95% CI, 1.35–2.20) and lower for those in the 40- to 54-year-old age group (OR = 0.78; 95% CI, 0.63–0.96). Driving between 12 a.m. and 6 a.m. resulted in higher odds of being culpable compare with all other 6-h time blocks. Direction and statistical significance remained consistent when applying the tool to all MV collisions. Sensitivity analysis including the removal of single vehicle collisions did not affect the direction or statistical significance of the main results.

Conclusions: The AMVCCT identified a culpable group that exhibited characteristics expected in drivers who are at fault in collisions. The age groups 25–39 and 40–54 demonstrated different results than the CCST. However, this is the only difference that exists in the findings of the AMVCCT compared to the CCST and could exist due to differences between the driving populations in Alberta and British Columbia. It is possible to adapt the CCST to provinces outside British Columbia and, in doing so, we can identify risk factors for collision contribution and not-at-fault drivers who represent the driving population.     

The potential future contribution of shipping to acidification of the Baltic Sea

International regulation of the emission of acidic sulphur and nitrogen oxides from commercial shipping has focused on the risks to human health, with little attention paid to the consequences for the marine environment. The introduction of stricter regulations in northern Europe has led to substantial investment in scrubbers that absorb the sulphur oxides in a counterflow of seawater. This paper examines the consequences of smokestack and scrubber release of acidic oxides in the Baltic Sea according to a range of scenarios for the coming decades. While shipping is projected to become a major source of strong acid deposition to the Baltic Sea by 2050, the long-term effect on the pH and alkalinity is projected to be significantly smaller than estimated from previous scoping studies. A significant contribution to this difference is the efficient export of surface water acidification to the North Sea on a timescale of 15–20 years.     

Noninvasive characterization of the Trecate (Italy) crude-oil contaminated site: links between contamination and geophysical signals

The characterization of contaminated sites can benefit from the supplementation of direct investigations with a set of less invasive and more extensive measurements. A combination of geophysical methods and direct push techniques for contaminated land characterization has been proposed within the EU FP7 project ModelPROBE and the affiliated project SoilCAM. In this paper, we present results of the investigations conducted at the Trecate field site (NW Italy), which was affected in 1994 by crude oil contamination. The less invasive investigations include ground-penetrating radar (GPR), electrical resistivity tomography (ERT), and electromagnetic induction (EMI) surveys, together with direct push sampling and soil electrical conductivity (EC) logs. Many of the geophysical measurements were conducted in time-lapse mode in order to separate static and dynamic signals, the latter being linked to strong seasonal changes in water table elevations. The main challenge was to extract significant geophysical signals linked to contamination from the mix of geological and hydrological signals present at the site. The most significant aspects of this characterization are: (a) the geometrical link between the distribution of contamination and the site’s heterogeneity, with particular regard to the presence of less permeable layers, as evidenced by the extensive surface geophysical measurements; and (b) the link between contamination and specific geophysical signals, particularly evident from cross-hole measurements. The extensive work conducted at the Trecate site shows how a combination of direct (e.g., chemical) and indirect (e.g., geophysical) investigations can lead to a comprehensive and solid understanding of a contaminated site’s mechanisms.     

Quantification of the resource recovery potential of municipal solid waste incineration bottom ashes

Municipal solid waste incineration (MSWI) plays an important role in many European waste management systems. However, increasing focus on resource criticality has raised concern regarding the possible loss of critical resources through MSWI. The primary form of solid output from waste incinerators is bottom ashes (BAs), which also have important resource potential. Based on a full-scale Danish recovery facility, detailed material and substance flow analyses (MFA and SFA) were carried out, in order to characterise the resource recovery potential of Danish BA: (i) based on historical and experimental data, all individual flows (representing different grain size fractions) within the recovery facility were quantified, (ii) the resource potential of ferrous (Fe) and non-ferrous (NFe) metals as well as rare earth elements (REE) was determined, (iii) recovery efficiencies were quantified for scrap metal and (iv) resource potential variability and recovery efficiencies were quantified based on a range of ashes from different incinerators. Recovery efficiencies for Fe and NFe reached 85% and 61%, respectively, with the resource potential of metals in BA before recovery being 7.2%ww for Fe and 2.2%ww for NFe. Considerable non-recovered resource potential was found in fine fraction (below 2 mm), where approximately 12% of the total NFe potential in the BA were left. REEs were detected in the ashes, but the levels were two or three orders of magnitude lower than typical ore concentrations. The lack of REE enrichment in BAs indicated that the post-incineration recovery of these resources may not be a likely option with current technology. Based on these results, it is recommended to focus on limiting REE-containing products in waste for incineration and improving pre-incineration sorting initiatives for these elements.     

Trends in the exploitation of South Atlantic shark populations

Approximately 25% of globally reported shark catches occur in Atlantic pelagic longline fisheries. Strong declines in shark populations have been detected in the North Atlantic, whereas in the South Atlantic the situation is less clear, although fishing effort has been increasing in this region since the late 1970s. We synthesized information on shark catch rates (based on 871,177 sharks caught on 86,492 longline sets) for the major species caught by multiple fleets in the South Atlantic between 1979 and 2011. We complied records from fishing logbooks of fishing companies, fishers, and onboard observers that were supplied to Brazilian institutions. By using exploratory data analysis and literature sources, we identified 3 phases of exploitation in these data (Supporting Information). From 1979 to 1997 (phase A), 5 fleets (40 vessels) fished mainly for tunas. From 1998 to 2008 (phase B), 20 fleets (100 vessels) fished for tunas, swordfishes, and sharks. From 2008 to 2011 (phase C), 3 fleets (30 vessels) fished for multiple species, but restrictive measures were implemented. We used generalized linear models to standardize catch rates and identify trends in each of these phases. Shark catch rates increased from 1979 to 1997, when fishing effort was low, decreased from 1998 to 2008, when fishing effort increased substantially, and remained stable or increased from 2008 to 2011, when fishing effort was again low. Our results indicate that most shark populations affected by longlines in the South Atlantic are currently depleted, but these populations may recover if fishing effort is reduced accordingly. In this context, it is problematic that comprehensive data collection, monitoring, and management of these fisheries ceased after 2012. Concurrently with the fact that Brazil is newly identified by FAO among the largest (and in fastest expansion) shark sub‐products consumer market worldwide.     

SPONTANEOUS RESOLUTION OF CYSTIC HYGROMA IN A 46,XX NORMAL FEMALE

We report a case of nuchal cystic hygroma with spontaneous resolution detected by ultrasound examination at 13 weeks' gestation. Fetal karyotype and amniotic fluid alphafetoprotein levels were normal. Extreme caution in evaluating this situation is stressed.     

Influence of organic solvents on the sensitivity of a bioluminescence toxicity test with Vibrio harveyi

The possibility of using organic solvents (OSs) to increase the susceptibility of bioluminescent microorganisms in a bioassay for assessing the toxicity of chemicals dissolved in water was investigated. To conduct the tests acetonitrile, dimethyl sulfoxide, ethanol, methanol, and isopropanol were used as OSs and Cd, Hg, and Zn as reference toxicants. The addition of OSs modified the toxicity of the three metals to Vibrio harveyi, according on the bioluminescence assay used. The sensitivity of the luminescence bioassay for Hg increased in the presence of the five OSs, thus indicating a greater toxic effect. However, the sensitivity of the assay for the other two metals, Cd and Zn, increased or decreased (lesser toxic effect) depending on the concentration at which the OSs were used. No correlation was observed between the concentration of the five OSs and the toxicity of the three reference toxicants. From this it can be deduced that none of these OSs could be recommended for increasing generically the sensitivity of toxicity biotests using V. harveyi.     

Tween 20 and Its Major Free Fatty Acids as Carbon Substrates for the Production of Polyhydroxyalkanoates in Pseudomonas aeruginosa ATCC 27853

The ability of Pseudomonas aeruginosa ATCC 27853 to grow and synthesize polyhydroxyalkanoates (PHAs) using Tween 20 as the sole carbon source was investigated. Tween 20 could support cell growth and PHA production. The polymer produced from Tween 20 was compared with those produced from its major free fatty acids components: lauric (C₁₂), myristic (C₁₄), and palmitic (C₁₆) acids. Gas-chromatographic analysis of methanolyzed samples and ¹³C-Nuclear Magnetic Resonance (NMR) showed that the PHAs obtained are composed of even carbon atoms 3-hydroxyalkanoates ranging from C₆ to C₁₄, with C₈ and C₁₀ as the predominant components. The nature of the carbon sources used had little influence on the composition, but was found to be important in determining the average molecular weight, shorter chain fatty acids yielding higher molecular weight products. Fast Atom Bombardment-Mass Spectrometry (FAB-MS) of partially pyrolyzed samples, coupled to statistical analysis, showed that these PHAs are random copolymers.