The effects of surfactant formulation on nonequilibrium NAPL solubilization

Surfactant-enhanced aquifer remediation (SEAR) involves the injection of surfactant solutions into aquifers contaminated with nonaqueous phase liquids (NAPL). Batch and column experiments were used to assess the effect of surfactant formulation on the rate of NAPL solubilization. The experimental variables were surfactant type, surfactant concentration, electrolyte concentration, and cosolvent concentration. Model equations were proposed and solved to describe solubilization under the conditions of each type of experiment. Using these models, a solubilization rate constant, kappa(b), and an overall mass transfer rate coefficient, kappa, were estimated from the batch and column experiments, respectively. The solubilization rate constant was consistently sensitive to surfactant type, surfactant concentration, and electrolyte concentration. The estimated solubilization rate constants varied over two orders of magnitude. The results of the column experiments also were sensitive to the surfactant formulation. Variations in the fitted mass transfer rate coefficient parameter, beta(0), were related to variations in the surfactant formulations. A comparison between the results of the batch and column experiments yields an apparent relationship between beta(0) and kappa(b). This relationship suggests that the mass transfer rate coefficient is directly related to the formulation of the surfactant solution.     

Male behaviors reveal multiple pherotypes within vine mealybug Planococcus ficus (Signoret) (Hemiptera; Pseudococcidae) populations

The vine mealybug (VM) females collected in Israel produce two sex pheromone compounds: lavandulyl senecioate (LS) and (S)-lavandulyl isovalerate (LI). The males display ambiguous behavior to LI: repulsion in the vineyard and attraction of laboratory-reared males. We addressed the question of individual male behavior, i.e., do males respond to both LS and LI, or might they display a distinct response to each of the two pheromone compounds. We compared male pherotype frequencies between wild-caught and laboratory-reared populations. Then, we examined the relationship between pherotype composition and male capture rates in pheromone traps. Finally, we addressed the heredity of the pherotypes. The Israeli VM populations contain nine different male pherotypes, as defined according to the male behavior to pheromone compounds. The studied Portuguese populations included five of the nine pherotypes; none of the Portuguese males were attracted to LI. It seems that the high frequency of males that were attracted to LI is related to dense VM populations. It is hypothesized that selection for the male pherotypes, I males, those that respond to LI, occur under high-density rearing conditions. This may result from shorter development times of males and females that produce more I male pherotypes. The lower relative frequency of trapping of males in LI-baited traps than expected from the percentage determined in a Petri dish arena suggests that males that respond solely to LS (S males) are better fliers. The results also suggest that the pherotype trait is inherited by both sexes of the VM.     

Goitre and environmental iodine deficiency in the UK — Derbyshire: A review

Endemic goitre was prevalent in the population of Derbyshire in the UK for many centuries until it declined from the 1930s. A contemporary medical survey showed that endemicity of goitre was particularly higher in the Carboniferous limestone areas of the Derbyshire-Peak District. Unlike classical goitrous areas of the world, where the distribution of goitre has been found to be related to the iodine content in the environment, there is no such relationship reported for the Derbyshire-Peak District area. The present study reviews the presence of endemic goitre in this area with reference to iodine in different environmental media using past and present data. In comparison with the world average values, the iodine contents in the soil and sediment in the Peak District are not deficient, but compared to England, Wales and Scotland averages, these levels are low. As no information on the mobility and bioavailability of iodine of this area is available, a cautious approach is necessary before any assumption is made on the aetiology of endemic goitre. The study also discusses some hypotheses relating to the possible cause of endemic goitre in the limestone areas. Further research needs are suggested depending on the land use and geochemistry of the Peak District to determine the underlying causes of the former endemic goitre in this area.     

Mapping cumulative impacts of mining on sediment retention ecosystem service in an Australian mining region

Mining development can potentially lead to cumulative impacts on ecosystems and their services across a range of scales. Site-specific environmental impact assessments are commonly assessed for mining projects; however, large-scale cumulative impacts of multiple mines that aggregate and interact in resources regions have had little attention in the literature and there are few examples where regional-scale mining impacts have been assessed on ecosystem services. The objective of this study is to quantify regional-scale cumulative impacts of mining on sediment retention ecosystem services. We apply the sediment delivery ratio model of Integrated Valuation of Ecosystem Services and Trade-offs to calculate and map the sediment retention and export using a synthetic catchment model and a real case study under different mining scenarios in an Australian mining region. Two impact indices were created to quantify the cumulative impacts associated with a single mine and the interactions between multiple mines. The indices clarified the magnitude of impacts and the positive/negative impacts associated with regional-scale sediment retention and export. We found cumulative impacts associated with multiple mines’ interaction occurred but the influence of these interactions was relatively weak. This research demonstrated the potential for utilising ecosystem services modelling for the quantitative assessment of the cumulative impacts. Such research provide decision-makers and planners with a tool for sustainable regional and landscape planning that balances the needs of mining and the provision of ecosystem services.     

Analyzing Human–Landscape Interactions: Tools That Integrate

Humans have transformed much of Earth’s land surface, giving rise to loss of biodiversity, climate change, and a host of other environmental issues that are affecting human and biophysical systems in unexpected ways. To confront these problems, environmental managers must consider human and landscape systems in integrated ways. This means making use of data obtained from a broad range of methods (e.g., sensors, surveys), while taking into account new findings from the social and biophysical science literatures. New integrative methods (including data fusion, simulation modeling, and participatory approaches) have emerged in recent years to address these challenges, and to allow analysts to provide information that links qualitative and quantitative elements for policymakers. This paper brings attention to these emergent tools while providing an overview of the tools currently in use for analysis of human–landscape interactions. Analysts are now faced with a staggering array of approaches in the human–landscape literature—in an attempt to bring increased clarity to the field, we identify the relative strengths of each tool, and provide guidance to analysts on the areas to which each tool is best applied. We discuss four broad categories of tools: statistical methods (including survival analysis, multi-level modeling, and Bayesian approaches), GIS and spatial analysis methods, simulation approaches (including cellular automata, agent-based modeling, and participatory modeling), and mixed-method techniques (such as alternative futures modeling and integrated assessment). For each tool, we offer an example from the literature of its application in human–landscape research. Among these tools, participatory approaches are gaining prominence for analysts to make the broadest possible array of information available to researchers, environmental managers, and policymakers. Further development of new approaches of data fusion and integration across sites or disciplines pose an important challenge for future work in integrating human and landscape components.     

When does nitrate become a risk for humans?

Is nitrate harmful to humans? Are the current limits for nitrate concentration in drinking water justified by science? There is substantial disagreement among scientists over the interpretation of evidence on the issue. There are two main health issues: the linkage between nitrate and (i) infant methaemoglobinaemia, also known as blue baby syndrome, and (ii) cancers of the digestive tract. The evidence for nitrate as a cause of these serious diseases remains controversial. On one hand there is evidence that shows there is no clear association between nitrate in drinking water and the two main health issues with which it has been linked, and there is even evidence emerging of a possible benefit of nitrate in cardiovascular health. There is also evidence of nitrate intake giving protection against infections such as gastroenteritis. Some scientists suggest that there is sufficient evidence for increasing the permitted concentration of nitrate in drinking water without increasing risks to human health. However, subgroups within a population may be more susceptible than others to the adverse health effects of nitrate. Moreover, individuals with increased rates of endogenous formation of carcinogenic N-nitroso compounds are likely to be susceptible to the development of cancers in the digestive system. Given the lack of consensus, there is an urgent need for a comprehensive, independent study to determine whether the current nitrate limit for drinking water is scientifically justified or whether it could safely be raised.     

Public Discourses of Climate Change in Hong Kong

The changing political environment in Hong Kong is likely to accelerate the transition in environmental policy discourse. Opportunities for critical public involvement are increasing and new environmental discourses are emerging. Yet, previous social surveys did not explore the range of these discourses and few focused on climate change. The paper outlines the public discourses of climate change in Hong Kong. Using Q-methodology, four distinctive discourses were identified, namely Pure Environmentalism, Political Pragmatism, Popular Optimism, and Fair Rationalism. While the first one is climate-centric, the other three are political or social in nature and do not indicate a clear or coherent climate orientation. This suggests that the climate change concern of the Hong Kong public is not tightly embedded into a coherent narrative of social and institutional transformation. Effective climate change governance and policies require strengthening the link between such concern and the public desires for social and institutional transformation. Bringing together the ongoing social movements and environmental campaigns will be instrumental to nurture an active climate citizenry.     

Chemical (polycyclic aromatic hydrocarbon and heavy metal) levels in contaminated stormwater and sediments from a motorway dry detention pond drainage system

Chemical (polycyclic aromatic hydrocarbon - PAH and heavy metal) levels in stormwater and sediment samples collected from the London Orbital (M25) motorway drainage dry detention pond at Oxted, Surrey, UK were determined. Such chemicals are derived from vehicular combustion products and the wear and tear materials deposited onto the motorway surface. Gas chromatography-mass spectrometry (GC-MS) was used for the qualitative and quantitative determination of 16 USEPA priority PAHs in motorway drainage sediments. The GC-MS method, incorporating a solid phase extraction step, provides detection limits ranging from 0.17 to 0.41 mg kg(-1)(dry weight). Almost all of the 16 USEPA listed PAHs were detected. Phenanthrene, fluoranthene, pyrene, benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(a)pyrene and benzo(g,h,i)perylene (PAH numbers 5, 7, 8, 9, 10, 11, 13 and 16) were among the PAHs found at "higher" levels (ranging from 0.3-10.2 mg kg(-1), dry weight) in the sediment samples. PAH levels show little change along the motorway drainage silt trap (facility for reducing the levels of suspended particulate matter in the stormwater). PAH concentrations are considerably higher in the dry detention pond outflow interceptor. Statistical analysis showed that significant correlation coefficients (based on a t-test at the 95% confidence interval) were obtained between those PAHs found at high concentrations over all of the sampling sites. Several PAHs were dispersed beyond the treatment facility and accumulation in the sediment of the deer park resulted in levels ranging from 0.3-1.6 mg kg(-1), dry weight. These PAHs found beyond the treatment facility (in the local farm deer park) may contribute a serious health threat to farm animals or even fish in the aquatic environment. Heavy metal levels (V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Mo, Cd, Sb and Pb) of the drainage stormwater and sediments were determined by inductively coupled plasma mass spectrometry (ICP-MS), with quality control evaluation using two certified reference materials. Typical detection limits were found to be below 0.1 [micro sign]g l(-1) for stormwater and 0.005 mg kg(-1) for acid digested sediments. Raised heavy metal levels were found throughout the dry detention pond facility and only decrease when the stormwater is diluted following discharge into the river Eden. Statistical analysis also confirms that some significant correlations exist between various heavy metals and PAHs. However, no overall conclusive trend is found indicating that a particular PAH is deposited in sediment relative to a specific heavy metal/s. These results raise some serious concerns about the dispersion and accumulation of chemicals in the sediments of motorway stormwater drainage systems and the need for maintenance and clean-up of contaminated material from such systems.     

Reforming the CDM for sustainable development: lessons learned and policy futures

The Clean Development Mechanism (CDM) has successfully demonstrated that market-based mechanisms can achieve some cost effective emissions reductions in developing countries. However the distribution of CDM projects has been extremely uneven across countries and regions, and a few technologies and sectors have dominated the early stages of CDM experience. This has caused some to question whether the CDM has fallen short of its potential in contributing to sustainable development. We review the broad patterns of CDM project approvals and evaluate 10 CDM projects according to their sustainability benefits. The difficulty of defining “sustainable development” and the process of defining criteria by individual non-Annex 1 governments has meant that sustainable development concerns have been marginalized in some countries. Given these observed limitations, we present possible CDM policy futures, focusing on the main proposals for a post-2012 climate regime. Five options for enhancing the sustainable development benefits in the CDM are discussed, including proactive approaches to favour eligibility of emission reduction projects which ensure such co-benefits.     

A hybrid process for manufacturing surgical-grade knife blade cutting edges from bulk metallic glass

The demand for precision surgical knives is enormous. Currently, diamond knives have been the preferred choice among surgeons for use in precision surgeries, owing to the extreme hardness of diamond and the sharpness that can be achieved in single crystal diamond blades, but material and processing costs are high. Bulk metallic glass (BMG) has the potential to be an economically viable material of similar performance for use in precision surgical knives. To this end, a novel hybrid manufacturing process integrating thermally assisted micro-molding and micro-drawing has been developed for producing BMG surgical-grade knife blade cutting edges with edge radii <50 nm. A hybrid process testbed was designed and used to successfully run tests over a range of the key process variables. Through this testing the deformation of BMG under different strain rates and temperatures was studied in terms of the quality of edge formation. The hybrid process was shown to be capable of producing cutting edges of radius at or below 100 nm.