Simultaneous immobilization of metals and arsenic in acidic polluted soils near a copper smelter in central Chile

Introduction  

Acidic and metal(oid)-rich topsoils resulted after 34 years of continuous operations of a copper smelter in the Puchuncaví valley, central Chile. Currently, large-scale remediation actions for simultaneous in situ immobilization of metals and As are needed to reduce environmental risks of polluted soils. Aided phytostabilization is a cost-effective alternative, but adequate local available soil amendments have to be identified and management options have to be defined.     

Mobility of free surface in different liquids and its influence on water striders locomotion

Dynamics of the surface layer in different liquids is examined by means of infrared thermography of the surface and simultaneous velocity fields measurements using surface and infrared Particle Image Velocimetry. This technique allows measurements and comparison of two velocity fields—at the surface and at small depth about 50–200 μm. In distilled water the velocity fields at the surface and at small depth exhibit significant dissimilarity. The flow field below the surface is essentially 3D, whereas the surface flow is characterized by vanishing 2D divergence of velocity, indicating predominantly planar motion. In contrast, in ethanol–butanol mixture two velocity fields are well correlated, both corresponding to 3D flow with continuous surface renewal. Thermal patterns, observed at the surface, and the flow field structure in different liquids are associated with different boundary conditions for velocity at the surface. Water surface is seldom renewed, which inhibits heat and mass exchange between the liquid and atmosphere. However, absence of vertical advection also enables organisms to live within the surface layer, to stand and walk on the free surface. This is illustrated by the difficulties a water strider faces on the surface of ultrapure water, which exhibits Marangoni convection.     

Some Advances in Fluorometric Techniques for Water Tracing

A common technique for ground water tracing uses continuous or discrete analysis of fluorescent tracer dyes to produce tracer breakthrough curves which can be analysed to determine ground water trajectory, velocity and dispersivity. Some fluorescent dyes are excellent tracers, but there remain significant constraints in fluorometry with respect to installation, control and data acquisition using standard filter fluorometers as well as with general analytical protocols. This paper identifies some of the constraints associated with the widely used Turner Designs Model 10 Series filter fluorometer and technical and operational solutions which can significantly improve the precision, accuracy and time resolution of tracer data.     

Using an Allowance Reserve to Manage Uncertain Costs in a Cap-and-Trade Program for Greenhouse Gases

This paper investigates the design and performance of an allowance reserve in the context of a cap-and-trade program for greenhouse gases. We use a Monte Carlo approach in which the parameters of the marginal abatement cost function, and the supply of offsets, are drawn from specified distributions. Our framework focuses on the potential impact of “medium-run shocks” to abatement cost and offset supply, as opposed to either short-run volatility or permanent shifts in the cost curve. Our model suggests that under reasonable (and even fairly conservative) assumptions about abatement cost and offset supply, an allowance reserve broadly similar to recent proposals for US climate legislation can be effective in containing allowance prices. In our core policy scenario, with a trigger price equal to US $32 in 2015, we estimate that the probability of drawing on the allowance reserve is <25% and the probability of requiring more than 7?GT of reserve tons over 20?years is <5%. We also use the model to explore the trade-off among three features of the reserve that are most relevant to policy makers: the total size of the reserve, the trigger price, and the degree of confidence that the reserve will be large enough to limit allowance prices to the target level. Our essential result is that a lower trigger price, or a higher degree of confidence, requires a larger reserve.     

The BIOTA Biodiversity Observatories in Africa—a standardized framework for large-scale environmental monitoring

The international, interdisciplinary biodiversity research project BIOTA AFRICA initiated a standardized biodiversity monitoring network along climatic gradients across the African continent. Due to an identified lack of adequate monitoring designs, BIOTA AFRICA developed and implemented the standardized BIOTA Biodiversity Observatories, that meet the following criteria (a) enable long-term monitoring of biodiversity, potential driving factors, and relevant indicators with adequate spatial and temporal resolution, (b) facilitate comparability of data generated within different ecosystems, (c) allow integration of many disciplines, (d) allow spatial up-scaling, and (e) be applicable within a network approach. A BIOTA Observatory encompasses an area of 1?km² and is subdivided into 100 1-ha plots. For meeting the needs of sampling of different organism groups, the hectare plot is again subdivided into standardized subplots, whose sizes follow a geometric series. To allow for different sampling intensities but at the same time to characterize the whole square kilometer, the number of hectare plots to be sampled depends on the requirements of the respective discipline. A hierarchical ranking of the hectare plots ensures that all disciplines monitor as many hectare plots jointly as possible. The BIOTA Observatory design assures repeated, multidisciplinary standardized inventories of biodiversity and its environmental drivers, including options for spatial up- and downscaling and different sampling intensities. BIOTA Observatories have been installed along climatic and landscape gradients in Morocco, West Africa, and southern Africa. In regions with varying land use, several BIOTA Observatories are situated close to each other to analyze management effects.     

Heavy metal contents in whitefish (Coregonus lavaretus) along a pollution gradient in a subarctic watercourse

Metallurgic industry is a source of serious environmental pollution related to the emission of heavy metals. Freshwater systems are focal points for pollution, acting as sinks for contaminants that may end up in fish and humans. The Pasvik watercourse in the border area between Finland, Norway and Russia is located in the vicinity of the Pechenganickel metallurgic enterprises, and the lower part of the watershed drains the Nikel smelters directly through Lake Kuetsjarvi. Heavy metal (Ni, Cu, Cd, Zn, Pb and Hg) concentrations in environment (water and sediments) and whitefish Coregonus lavaretus tissue (gills, liver, kidney and muscle) were contrasted between five lake localities situated along a spatial gradient of increasing distance (5-100 km) to the smelters. The heavy metal concentrations, in particular Ni, Cu and Cd, were highly elevated in Kuetsjarvi, but steeply declined with increasing distance to the smelters and were moderate or low in the other four localities. The study demonstrates that the majority of metal emissions and runoffs are deposited near the pollution source, and only moderate amounts of the heavy metal contaminants seem to be transported at further distances. Bioaccumulation of Hg occurred in all investigated tissues, and higher Hg concentrations in planktivorous versus benthivorous whitefish furthermore indicated that pelagic foraging is associated with higher levels of Hg biomagnification. Potential population ecology impacts of high heavy metal contaminations where mainly observed in whitefish in Kuetsjarvi, which showed depletions in growth rate, condition factor and size and age at maturation.     

Serial batch leaching procedure for characterization of coal fly ash

Although many leaching methods have been used for various purposes by research groups, industries, and regulators, there is still a need for a simple but comprehensive approach to leaching coal utilization by-products and other granular materials in order to estimate potential release of heavy metals when these materials are exposed to natural fluids. A serial batch characterization method has been developed at the National Energy Technology Laboratory that can be completed in 2–3 days to serve as a screening tool. The procedure provides an estimate of cumulative metals release under varying pH conditions, and leaching the sample at increasing liquid/solid ratios can indicate the rate at which this process will occur. This method was applied to eight fly ashes, adapted to the acidic or alkaline nature of the ash. The leachates were analyzed for 30 elements. The test was run in quadruplicate, and the relative standard deviation (RSD) was used as a measure of method reproducibility. RSD values are between 0.02 and 0.70, with the majority of the RSD values less than 0.3. The serial batch leaching procedure was developed as a simple, relatively quick, yet comprehensive method of estimating the risk of heavy metal release from fly ash when it is exposed to natural fluids, such as acid rain or groundwater. Tests on a random selection of coal fly ashes have shown it to be a reasonably precise method for estimating the availability and long-term release of cations from fly ash.     

Multi-component assessment of worker exposures in a copper refinery. Part 2. Biological exposure indices for copper, nickel and cobalt

Urinary copper (Cu), nickel (Ni) and cobalt (Co) concentrations were determined for 127 Cu refinery workers (40 females, 87 males), with values of the 95% upper confidence interval of the geometric mean in nmol per mmol creatinine of 89 (Ni), 42 (Cu) and 3.4 (Co) for electrorefinery workers. In the pyrometallurgical departments, the corresponding concentrations were 37 (Ni), 99 (Cu) and 11 (Co). Female workers had higher Co urinary concentrations than males (p< or = 0.05) while no gender difference was observed for Cu and Ni. Inter-elemental correlations were moderate to weak. Based on the inhalable aerosol levels reported previously for the same workers, the observed urinary Cu concentrations were considerably lower than expected, relative to Co and Ni. This is interpreted in terms of the current understanding of Cu homeostasis.     

Solid-phase microextraction to monitor the sonochemical degradation of polycyclic aromatic hydrocarbons in water

Solid-phase microextraction (SPME) coupled with GC-MS has been used to monitor the degradation of polycyclic aromatic hydrocarbons (PAHs) by ultrasound treatment. Immersion SPME sampling enabled the fast and solventless extraction of target contaminants at the low microg l(-1) concentration level. The developed protocol was found to be linear in the concentration range from 0.1 to 50 microg l(-1) for most target analytes, with the limits of detection ranging between 0.01 and 0.70 microg l(-1) and the relative standard deviations between 4.31 and 27%. The developed SPME protocol was used to follow concentration profiles of aqueous solutions containing 16 PAHs, which were subject to low frequency ultrasonic irradiation. At the conditions employed in this study (80 kHz of ultrasound frequency, 130 W l(-1) of applied electric power density, 30 microg l(-1) of initial concentration for each of the 16 PAHs), sonochemical treatment was found capable of destroying the lower molecular weight PAHs (naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene and pyrene) within 120-180 min of irradiation. The higher molecular weight PAHs were more recalcitrant to ultrasound treatment.     

Advection and resulting CO2 exchange uncertainty in a tall forest in central Germany

Potential losses by advection were estimated at Hainich Forest, Thuringia, Germany, where the tower is located at a gentle slope. Three approaches were used: (1) comparing nighttime eddy covariance fluxes to an independent value of total ecosystem respiration by bottom-up modeling of the underlying processes, (2) direct measurements of a horizontal CO2 gradient and horizontal wind speed at 2 m height in order to calculate horizontal advection, and (3) direct measurements of a vertical CO2 gradient and a three-dimensional wind profile in order to calculate vertical advection. In the first approach, nighttime eddy covariance measurements were compared to independent values of total ecosystem respiration by means of bottom-up modeling of the underlying biological processes. Turbulent fluxes and storage term were normalized to the fluxes calculated by the bottom-up model. Below a u(*) threshold of 0.6 m/s the normalized turbulent fluxes decreased with decreasing u(*), but the flux to the storage increased only up to values less than 20% of the modeled flux at low turbulence. Horizontal advection was measured by a horizontal CO2 gradient over a distance of 130 m combined with horizontal wind speed measurements. Horizontal advection occurred at most of the evenings independently of friction velocity above the canopy. Nevertheless, horizontal advection was higher when u(*) was low. The peaks of horizontal advection correlated with changes in temperature. A full mass balance including turbulent fluxes, storage, and horizontal and vertical advection resulted in an increase of spikes and scatter but seemed to generally improve the results from the flux measurements. The comparison of flux data with independent bottom-up modeling results as well as the direct measurements resulted in strong indications that katabatic flows along the hill slope during evening and night reduces the measured apparent ecosystem respiration rate. In addition, anabatic flows may occur during the morning. We conclude that direct measurements of horizontal and vertical advection are highly necessary at sites located even on gentle hill slopes.