Degradation studies of novel degradable starch-polyethylene plastics containing oxidized polyethylene and prooxidant

Linear low-density polyethylene films were prepared that contained native corn starch (7, 14, or 28%), low or high molecular weight oxidized polyethylene (15%), and a prooxidant mixture (18% POLYCLEAN II) that contains manganese and vegetable oil. For each mixture all components were first mixed at high temperatures in a twin-screw extruder and pelletized. The pellets were cast into films using a single-screw extruder. Oxidized-polyethylene addition did not impair the transparency and thickness of the films and did not reduce the percentage elongation, whereas significant reductions in film mechanical properties were observed. Thermal and photodegradation properties of each film were evaluated by 70°C forced-air oven treatment (20 days), by high-temperature, high-humidity treatment in a steam chamber (20 days), and by exposure to ultraviolet light (365 nm; 4 weeks). Changes in the mechanical properties of the films were determined by an Instron Universal Test Machine; in the carbonyl index, Fourier transform infrared spectroscopy; and in molecular weight, by high-temperature gel-permeation chromatography (HT-GPC). The addition of oxidized polyethylene, especially high molecular weight oxidized polyethylene, and up to 14% starch to the films significantly increased the rate of thermal and photodegradation.Journal Paper No. J-15363 of the Iowa Agriculture and Home Economics Experiment Station, Ames. Project No. 0178 and 2889.     

A comparison of methods and materials for the analysis of leaded wipes

The purposes of this study are: (1) to determine whether proficiency analytical test (PAT) materials from the American Industrial Hygiene Association can be used to provide quality data for portable X-ray fluorescence analysis (XRF) of lead in dust wipe surface samples; (2) to provide data to determine whether the on-site analysis of field dust wipe samples by XRF and the laboratory method of inductively coupled plasma emission analysis (ICP) are comparable; and (3) to determine if differences exist between different wipe materials. Several wipes meet the ASTM E1792 performance requirements of lead background level less than 5 microg per wipe, be only one layer thick, yield recovery rates of 80- 120% from spiked samples, remain damp throughout the sampling procedure, and do not contain aloe. The wipes used in this study were Pace Wipes, which are used for the PAT materials, and, for the field samples, Palintest Wipes, which were supplied by the instrument manufacturer, and Ghost Wipes, which are popular because they digest in hot, concentrated acid, so that chemical analysis is simplified. Twenty PAT wipe samples were obtained from four different proficiency test rounds. Surface wipe samples were taken at three different locations representing different industry types. All samples were analyzed using a portable XRF spectrometer and by ICP. Strong linear relationships were found for the analysis of wipe samples by ICP and by portable XRF. For the PAT samples, the results from the ICP and XRF analysis were not statistically equivalent, which indicates a bias in the ICP analysis. The bias was not excessive, since all ICP analyses fell within the acceptable range for the proficiency samples. The good correlation between the proficiency sample reference values and the XRF determinations is not surprising considering similar proficiency samples were used to calibrate the instrument response. Users of this portable XRF analyzer could enroll in the proficiency test program as part of their quality assurance program. For field samples, the relationship was strongest for Palintest wipes, and the values found for all three industries could be combined. However, the results from the ICP and XRF analysis were not statistically equivalent using the correction factor in the calculation algorithm as supplied with the instrument, and a new coefficient was derived. The mean relative error for the XRF analysis versus the ICP analysis was greater than 25%, such that the method falls within the realm of screening procedures. For Ghost Wipe samples, the precision was different for different industries, and the results could not be pooled. Differences between the two wipe materials may be related to the number of folds required for analysis.     

Synthesis of grafted natural pozzolan with 3-aminopropyltriethoxysilane: preparation,characterization, and application for removal of Brilliant Green 1 and Reactive Black 5 from aqueous solutions

Environmental Science and Pollution Research - Natural pozzolan is an amorphous silicate-based material of volcanic origin. In this work, the natural pozzolan was modified by using...     

In vitro assessment of AhR-mediated activities of TCDD in mixture with humic substances

Humic substances (HS) are ubiquitous natural products of decomposition of dead organic matter. HS is present in most freshwaters at concentrations ranging from 0.5 to 50 mg L⁻¹. Organic carbon can represent 20% dry weight of sediments. Recently, the interaction of dissolved HS with the aryl hydrocarbon receptor (AhR) has been demonstrated. The AhR is a cytosolic receptor to which persistent organic pollutants (POPs) can bind and many of their toxic effects are mediated through interactions with this receptor. We describe in vitro effects (using H4IIE-luc cells) of binary mixtures of various HS with 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), since in contaminated environments these compounds occur simultaneously. Six out of 12 HS samples activated AhR even at environmentally relevant concentrations (17 mg L⁻¹), but did not reach the full AhR-activation even at excessive concentration. In simultaneous exposure of H4IIE-luc to HS (17 mg L⁻¹) and TCDD (1.2 pM) without any preincubation prior to exposure, either significant additive or facilitative effects were observed. No negative interactions, due to possible sorption of TCDD to HS was observed. Nevertheless, if the HS–TCDD binary mixture was preincubated for 6 days prior to the exposure on H4IIE-luc cells, the additive and facilitative effects were less due to possible sorption of TCDD onto HS. Similar results were obtained from analogous experiments with greater concentrations of both TCDD and HS.     

Residences with anomalous soil concentrations of dioxin-like compounds in two communities in Michigan, USA: a case study

Most contamination of residential property soil with dioxin-like compounds occurs as a result of proximity to industrial activity that produces such compounds and, outside the industrially impacted zone, the soil concentrations are at background levels. However, as part of the University of Michigan Dioxin Exposure Study, residential properties in the lower peninsula of Michigan, USA, were identified that were located far enough from known sources of these compounds that the soil concentrations should have been at background levels and yet the toxic equivalent (TEQ) of some properties' soil was greater than 2.5 standard deviations above the mean background level. In the three cases presented here from Midland/Saginaw Counties, the anomalously high-TEQ values were primarily due to the presence of polychlorinated dibenzofurans. Based on interviews with the residents and a comparison of soil congener profiles, it was deduced that these values resulted from anthropogenic soil movement from historically contaminated areas. In the cases from Jackson/Calhoun Counties, the unusually high-TEQ values were primarily due to polychlorinated biphenyls. In the case profiled here, it appears that the soil became contaminated through sandblasting to remove paint from the swimming pool. This study identified two mechanisms for soil contamination outside zones of industrial impact; thus, an assumption of background levels of soil contamination outside industrial zones may not be valid.     

Continuous-flow column study of reductive dehalogenation of PCE upon bioaugmentation with the Evanite enrichment culture

A continuous-flow anaerobic column experiment was conducted to evaluate the reductive dechlorination of tetrachloroethene (PCE) in Hanford aquifer material after bioaugmentation with the Evanite (EV) culture. An influent PCE concentration of 0.09 mM was transformed to vinyl chloride (VC) and ethene (ETH) within a hydraulic residence time of 1.3 days. The experimental breakthrough curves were described by the one-dimensional two-site-nonequilibrium transport model. PCE dechlorination was observed after bioaugmentation and after the lactate concentration was increased from 0.35 to 0.67 mM. At the onset of reductive dehalogenation, cis-dichloroethene (c-DCE) concentrations in the column effluent exceeded the influent PCE concentration indicating enhanced PCE desorption and transformation. When the lactate concentration was increased to 1.34 mM, c-DCE reduction to vinyl chloride (VC) and ethene (ETH) occurred. Spatial rates of PCE and VC transformation were determined in batch-incubated microcosms constructed with aquifer samples obtained from the column. PCE transformation rates were highest in the first 5 cm from the column inlet and decreased towards the column effluent. Dehalococcoides cell numbers dropped from approximately 73.5% of the total Bacterial population in the original inocula, to about 0.5% to 4% throughout the column. The results were consistent with estimates of electron donor utilization, with 4% going towards dehalogenation reactions.     

Reduced analytical availability of polychlorinated biphenyls (PCB's) in colored surface water

It has been generally accepted, during the last few decades, that the dissolved natural organic matter in water [DNOM] appearing as yellow brownish color, has become more and more "polluted" by inorganic and organic micro-pollutants. Due to the complexing properties of NOM, lipophilic organic micro-pollutants, such as, PCBs will be mobilized into water together with the DNOM. A mixture of eight PCBs, with Cl-content from tri-Cl to hepta-Cl, was added to solutions of ten different DNOMs. The DNOMs were aqua's solutions of RO-(reverse osmosis)-isolated material, having approximately the same concentration of carbon. After a contact time of three days, standard analytical PCB-method was used to determine the recovery of the added PCBs. The results show that the analytical availability of the added PCB was significantly reduced in the presence DNOM, compared to distilled water. The percentage loss in recovery of PCB increased with the content of Cl, in mean, from 3%/mg C for tri-Cl to 9%/mg C for hepta-Cl. The results also suggest that the analytical recovery of PCB was affected by the quality and the nature of the organic matter. For example the longer the DNOMs had been in the aquatic phase, the less efficient they are attached to the PCBs.     

Über einen Mechanismus der Transpirationserniedrigung durch ätherische Öle

The Science of Nature -