Atmospheric Transfer and Deposition Mechanisms of 210Pb Aerosols onto Forest Soils

Activities of ²¹⁰Pb carrier aerosols in an age-graded Sitka spruce conifer, three deciduous (oak, lime and sycamore) foliage and in rain and throughfall samples have been measured during the period of 2001–2002. The ²¹⁰Pb concentrations in the age-graded Sitka leaf needles have shown to accumulate until a steady state between accretion and loss of particulate matter is maintained with time. Similarly, the concentrations of ²¹⁰Pb on deciduous tree leaves increased with time until the leaves began to senesce. The ²¹⁰Pb inventory in bulk precipitation was significantly (r ²?=?0.99; P?<?0.001) large compared with that in throughfall samples, as indicated by a ratio of 1 to 0.1 of ²¹⁰Pb deposition in bulk precipitation to throughfall. This suggests that ²¹⁰Pb is retained in the Sitka spruce foliage during deposition until transfer to the ground mainly through litterfall. These findings suggest that the presence of woodland is responsible for enhanced ²¹⁰Pb deposition fluxes beneath wooded areas relative to open grassland soils.     

Regional analysis of global change impacts: Concepts, tools and first results

The paper introduces an approach for the analysis of global change impacts on river basins or regions. This approach is quite general and can be transferred to any region or river basin of interest on earth. The first application of the approach was in the Elbe river basin, with primary focus on the hydrologic model part and on the integration of crop growth and nitrogen dynamics. Finally, concepts for the integration of socio-economic aspects in the analysis are introduced.     

Stochastic landslide vulnerability modeling in space and time in a part of the northern Himalayas, India

Little is known about the quantitative vulnerability analysis to landslides as not many attempts have been made to assess it comprehensively. This study assesses the spatio-temporal vulnerability of elements at risk to landslides in a stochastic framework. The study includes buildings, persons inside buildings, and traffic as elements at risk to landslides. Building vulnerability is the expected damage and depends on the position of a building with respect to the landslide hazard at a given time. Population and vehicle vulnerability are the expected death toll in a building and vehicle damage in space and time respectively. The study was carried out in a road corridor in the Indian Himalayas that is highly susceptible to landslides. Results showed that 26% of the buildings fall in the high and very high vulnerability categories. Population vulnerability inside buildings showed a value >0.75 during 0800 to 1000 hours and 1600 to 1800 hours in more buildings that other times of the day. It was also observed in the study region that the vulnerability of vehicle is above 0.6 in half of the road stretches during 0800 hours to 1000 hours and 1600 to 1800 hours due to high traffic density on the road section. From this study, we conclude that the vulnerability of an element at risk to landslide is a space and time event, and can be quantified using stochastic modeling. Therefore, the stochastic vulnerability modeling forms the basis for a quantitative landslide risk analysis and assessment.     

Estimation of transport and degradation parameters for naphthalene and anthracene: influence of mass transfer on kinetics

The distributions of culturable bacteria and functional bacteria associated with nitrogen (N) or phosphorus (P) in the backwater areas of the Three Gorges Reservoir (TGR) were investigated. Results from seven locations in the TGR indicated that the abundance of total bacteria was high, with 8.12 × 10⁶, 2.70 × 10⁷, and 6.73 × 10¹⁰ colony-forming units per milliliter or per gram dry weight in surface water, bottom water, and sediments, respectively. Aquatic environments with higher nutrient loadings possessed higher bacteria densities and lower bacteria community diversities. Eight kinds of functional bacteria ratios, including surface water to bottom water and ratios of water to sediments, were calculated, in which four kinds of functional bacteria, namely, nitrogen-fixing bacteria, ammonia-oxidizing bacteria, nitrite-oxidizing bacteria, and organophosphate-solubilizing bacteria, displayed obvious differences in different locations. Based on the functional bacteria ratios of water to sediments, it was found that the obtained result of location grouping from cluster analysis was similar to that based on the community-level physiological profiles studies. The above results showed that the ratios of functional bacteria could distinguish the aquatic environments with different trophic conditions in the TGR. This demonstrated that the distribution ratios of functional bacteria in aquatic environments could work as potential bioindicators to reflect the trophic condition of the water.     

Measuring Concentrations of Volatile Organic Compounds in Vinyl Flooring

ABSTRACT

The initial solid-phase concentration of volatile organic compounds (VOCs) is a key parameter influencing the emission characteristics of many indoor materials. Solid-phase measurements are typically made using solvent extraction or thermal headspace analysis. The high temperatures and chemical solvents associated with these methods can modify the physical structure of polymeric materials and, consequently, affect mass transfer characteristics.

To measure solid-phase concentrations under conditions resembling those in which the material would be installed in an indoor environment, a new technique was developed for measuring VOC concentrations in vinyl flooring (VF) and similar materials. A 0.09-m² section of new VF was punched randomly to produce ~200 0.78-cm² disks. The disks were milled to a powder at -140 °C to simultaneously homogenize the material and reduce the diffusion path length without loss of VOCs. VOCs were extracted from the VF particles at room temperature by fluidized-bed desorption (FBD) and by direct thermal desorption (DTD) at elevated temperatures. The VOCs in the extraction gas from FBD and DTD were collected on sorbent tubes and analyzed by gas chromatog-raphy/mass spectrometry (GC/MS). Seven VOCs emitted by VF were quantified. Concentration measurements by FBD ranged from 5.1 |ig/g VF for n-hexadecane to 130 |Jg/g VF for phenol. Concentrations measured by DTD were higher than concentrations measured by FBD. Differences between FBD and DTD results may be explained using free-volume and dual-mobility sorption theory, but further research is necessary to more completely characterize the complex nature of a diffusant in a polymer matrix.     

Kinetic Sequential Sampling (KSS) System: An Automated Sampling System for Measuring Vertical Concentration Profiles of Airborne Particles

ABSTRACT

An electronically controlled lift system carrying a realtime particle monitor has been developed for sampling air sequentially, at different heights within the breathing zone. Data are automatically logged at the different receptor levels, for the determination of average vertical concentration profiles of airborne particulate matter. The system is easy to operate, portable, and easily extended to different heights or modified for use with other types of monitors (e.g., a portable CO analyzer). For measuring airborne particle concentrations, a Grimm Dust Monitor 1.104/5 was used. The results of trial runs, which were carried out indoors and in a relatively open semi-rural area, are presented, and applications of the kinetic sequential sampling (KSS) system are discussed.     

Circulation and Stream Plume Modeling in Conesus Lake

A three-dimensional hydrodynamic model that includes the effect of drag from macrophytes was applied to Conesus Lake to study the seasonal circulation and thermal structure during spring and early summer. Local weather conditions and stream flow data were used to drive the model. The drag coefficient for macrophytes was calculated as a function of leaf density. In general, the model results show good agreements with the observations, including vertical temperature profiles measured at two locations and average surface temperature derived from calibrated thermal imagery for large-scale simulations of the entire lake. Additional high-resolution simulations were carried out to understand water circulation and transport of sediment and model-generated tracer during hydrometeorological events at stream mouths for two experimental sites. The model results show that the plume development at stream mouths during storm events in Conesus Lake are site-dependent and may either be current- or wind-driven. The results also show a significant effect from the presence of macrophytes on sediment deposition near stream mouths.     

Monitoring dissolved copper concentrations in Chesapeake Bay,U.S.A.

Dissolved copper and selected water chemistry parameters were monitored for 11 months in Chesapeake Bay, U.S.A. Dissolved copper concentrations in four recreational marinas, a large harbor, two major river systems, and a heavily used shipping canal ranged from below detectable levels to 80 g L^-1 (\-X=11.7 g L^-1). Dissolved copper was detected >91% of the time at five locations. Lowest copper concentrations were found in Potomac River, Baltimore Harbor, Pier One Marina, and C & D Canal (\-X=6–10 g L^-1; slightly higher levels of dissolved copper were found in Choptank River (\-X=12 g L^-1). Highest levels of copper were detected in Port Annapolis, Hartge, and Piney Narrows Marinas (\-X=13–18 g L^-1), with the highest values observed in the study (70 and 80 g L^-1) found in two of these marinas. Copper in the three marinas with highest dissolved copper levels could have been toxic to some of the more sensitive aquatic species. Intensive study of one marina indicated that a likely source of dissolved copper was the recreational boats housed in the marina.