Rotary Kiln Incineration III. An Indepth Study—Kiln Exit/Afterburner/Stack Train and Kiln Exit Pattern Factor Measurements During Liquid CCl4 Processing

Temperature and stable species concentration data are presented from various locations within a full-scale rotary kiln incinerator firing natural gas/carbon tetrachloride/air. The data are being collected as part of a cooperative program involving university, industry and government participation. The overall goal of the program is to develop a more sophisticated understanding of and a predictive capability for rotary kiln and afterburner performance as influenced by basic design and operational parameters. Non-uniformities in stable species and temperature exist for this particular kiln, at the kiln exit, under certain operating conditions. Flow perturbations from within the kiln were found to persist into the afterburner, but not into the stack. High destruction and removal efficiencies (DRE’s) were achieved under the operating conditions of these tests through adequate secondary combustion processing.     

Rotary Kiln Incineration IV. An Indepth Study— Kiln Exit,Transition and Afterburner Sampling During Liquid CCl4 Processing

Detailed temperature and stable species concentration data are presented from the kiln exit, transition section and afterburner of a full-scale incinerator facility firing natural gas/carbon tetrachloride/air. The data are collected as part of a cooperative program involving university, industry and government participation. The overall goal of the program is to develop an understanding and predictive capability for rotary kiln and afterburner performance as influenced by basic design and operational parameters. The data demonstrate that nonuniformities in stable species and temperature exist, under certain operating conditions, at the kiln exit in the vertical direction only. Measurements from the transition section indicate that non-uniformities may exist within this region under certain operating conditions. Flow perturbations from within the kiln can persist into the afterburner, although the degree of nonuniformity is substantially reduced compared to either the kiln or transition sections. High destruction and removal efficiencies were achieved under all operating conditions of these tests through a combination of kiln and secondary combustion processing.     

Comment on “Methylcyclopentadienyl Manganese Tricarbonyl as an Antiknock: Composition and Fate of Manganese Exhaust Products”

In an article published in the August 1975, Journal of the Air Pollution Control Association entitled “Methylcyclopentadienyl Manganese Tricarbonyl as an Antiknock: Composition and Pate of Manganese Exhaust Products,” the authors conclude that, “… use of MMT in gasoline will result in no public health hazards, because of the low toxicity of manganese and because of the very low concentration of MMT that would be used in gasoline …. If all gasoline contained 0.1 g Mn/gal, the amount of airborne Mn its exhaust would contribute to urban areas would contribute to urban areas would be only 0.02-0.2 μg/m³, with a median value of 0.05 μg/m³.”     

Photocrosslinking of an Acrylated Epoxidized Linseed Oil: Kinetics and its Application for Optimized Wood Coatings

Over the past few decades, the industry developed an increasing interest in using renewable, bio-based thermosetting polymers as matrix systems for composites and coating systems. In the present paper an acrylated epoxidized linseed oil (AELO) was synthesized from epoxidized linseed oil (ELO) through ring opening of the oxirane group using acrylic acid as the ring opening agent. The synthesized AELO was mixed with three different photoinitiators and cured under monochromatic conditions (???=?365?nm) at different light intensities and at different temperatures. The concentration of the initiators was aligned that all initiators absorb at 365?nm the same amount of light. The evolution of cure was monitored by using real-time infrared spectroscopy with a heated attenuated total reflection unit. The decrease of absorption in the measured spectra at 1,406?cm^?1 was used to calculate the conversion of acrylic double bonds with increasing time of UV light exposure to get information about the cure kinetics for each AELO mixture at different light intensities and different temperatures. Wood substrates were coated in a preliminary work with the AELO mixtures and after UV-curing some technological coating properties like gloss, scratch resistance, adhesion, and solvent resistance were tested. In combination with the information about the cure kinetics in the present work the coating properties were correlated with the cure evolution and the final degree of double bond conversion. The found correlation can be used in the future to find optimized coating conditions for the AELO mixtures on wood substrates.     

Arbuscular mycorrhizal fungi involvement in zinc and cadmium speciation change and phytoaccumulation

Over the past few years, there has been a greater study and understanding of the application of phytoremediation to remediate contaminated soil. The enhancement of phytoaccumulation of heavy metals—zinc (Zn), cadmium (Cd), arsenic (As), and selenium (Se)—in plants has been shown by inoculation of roots using arbuscular mycorrhizal fungi (AMF). This article presents the results of in vitro lab experiments conducted to verify the effects of AMF ( Glomus intraradices) hyphae on speciation of essential Zn and nonessential Cd heavy metals in order to change these metals from a water‐ insoluble carbonate to a soluble and phytoavailable form. Results show that in the presence of heavy metals in a nonavailable form to plants, endomycorrhizal hyphae can change the metal from carbonate to a water‐ soluble species. This phenomenon is more apparent with a nonessential (Cd) than with an essential metal (Zn). Zn saturation is reached in the G. intraradices colonized roots at around 400 ppm, independently of initial ZnCO₃ concentrations. Cd saturation is not reached; in the lower Cd treatment, the plant/media metal ratio is 3:1, and in the higher treatment, the ratio is 1:1. © 2005 Wiley Periodicals, Inc.     

Chemische Reaktionen von Chlorvinylarsinverbindungen (Lewisit)

2,2′-Dichlorodivinylarsine chloride (Lewisite II) react by room temperature quickly with alcohols in an equilibrium reaction to yield 2,2′-Dichlorodivinylarsine ether. The reactions are not quantitative. The methyl-, ethyl-and propylether are not stable.