Selective separation of deltamethrin by molecularly imprinted polymers using a β-cyclodextrin derivative as the functional monomer

A deltamethrin-imprinted polymer (MIP₁) was prepared using bis(-6-O-butanediacid monoester)-β-cyclodextrin (BBA-β-CD) as the functional monomer and toluene 2,4-diisocyanate (TDI) as the cross-linker. In comparison to the molecularly imprinted polymer where β-CD was applied as the functional monomer (MIP₂), MIP₁ showed a higher specific binding capacity (ΔC_P) and an improved imprinting factor (IF) for deltamethrin. The selective recognition experiments demonstrated that compared to MIP₂, MIP₁ could better recognize its template over other substrates that had similar chemical structures. The solid phase extraction (SPE) of deltamethrin using MIP₁ as the adsorbent was further investigated. The recoveries of the molecularly imprinted solid phase extraction (MISPE) column for deltamethrin were 83.2–93.4% with relative standard deviations (RSD) of 2.03–6.19%. The method has been successfully applied to the enrichment of trace deltamethrin from real water samples.     

The fate of methoxychlor in soils and transformation by soil microorganisms

Abstract

Methoxychlor was found to be sufficiently persistant in soil and its residues were present even 18 months after the soil treatment. Saprophytes, fungi and actinomyces were unaffected by varying concentrations of methoxychlor, azotobacter however was susceptable. Soil strains isolated did not utilize methoxychlor as a sole carbon source except for 9 cultures belonging to the genera Bacillus, Acineto‐bacter and Rhodococcus which carried out the complete dechlorination, demethylation and splitting of one of methoxychlor aromatic rings. Anaerobic conditions were more favorable for methoxychlor biodegradation by soil and pure microbial cultures.     

One-year measurements of chloroethenes in tree cores and groundwater at the SAP Mimoň Site, Northern Bohemia

Chlorinated ethenes (CE) are among the most frequent contaminants of soil and groundwater in the Czech Republic. Because conventional methods of subsurface contamination investigation are costly and technically complicated, attention is directed on alternative and innovative field sampling methods. One promising method is sampling of tree cores (plugs of woody tissue extracted from a host tree). Volatile organic compounds can enter into the trunks and other tissues of trees through their root systems. An analysis of the tree core can thus serve as an indicator of the subsurface contamination. Four areas of interest were chosen at the experimental site with CE groundwater contamination and observed fluctuations in groundwater concentrations. CE concentrations in groundwater and tree cores were observed for a 1-year period. The aim was to determine how the CE concentrations in obtained tree core samples correlate with the level of contamination of groundwater. Other factors which can affect the transfer of contaminants from groundwater to wood were also monitored and evaluated (e.g., tree species and age, level of groundwater table, river flow in the nearby Plou?nice River, seasonal effects, and the effect of the remediation technology operation). Factors that may affect the concentration of CE in wood were identified. The groundwater table level, tree species, and the intensity of transpiration appeared to be the main factors within the framework of the experiment. Obtained values documented that the results of tree core analyses can be used to indicate the presence of CE in the subsurface. The results may also be helpful to identify the best sampling period for tree coring and to learn about the time it takes until tree core concentrations react to changes in groundwater conditions. Interval sampling of tree cores revealed possible preservation of the contaminant in the wood of trees.     

Characterization of Volatile Organic Chemical Emissions From Carpet Cushions

Abstract

The U.S. Consumer Product Safety Commission is investigating chemical emissions from carpet systems in order to determine whether the emissions may be responsible for the numerous health complaints associated with carpet installation. As part of this effort, a study was conducted to identify and quantify volatile organic compounds (VOCs) released into the air by five major product types of new carpet cushions. Cushion samples were tested in small-volume dynamic chambers over a six-hour exposure period. Airborne VOCs collected on multisorbent samplers were identified using sensitive gas chromatography/mass spectrometry. The emissions of selected VOCs were quantitated with the small-scale chamber method and further characterized in larger environmental chambers conducted over a 96-hour period under conditions more representative of indoor environments. A separate chamber method was developed to screen polyurethane cushions for emissions of toluene diisocyanates (TDI). Over 100 VOCs, spanning a broad range of chemical classes, were emitted from 17 carpet cushions. The pattern of emitted VOCs varied between and among product types, which reflects probable differences in manufacturing processes and ingredients. No significant quantities of TDI or formaldehyde were released by any cushions. Emission profiles were characterized for total VOCs and for the predominant individual VOCs. As a group, the synthetic fiber cushion samples emitted the lowest quantities of VOCs. Cushion samples purchased from carpet retailers released lesser amounts of VOCs than samples of the same cushion types obtained directly from the manufacturing mills, suggesting that chemical losses from the bulk material may ensue as a result of transport, handling, and storage prior to installation. The data suggest that placement of carpet on top of a carpet cushion, as would occur in a residential installation, reduced the rate of some VOC emissions when compared to the cushion alone.     

Analysis of Remote Sensing Errors of Omission and Commission Under FTP Conditions

Abstract

Second-by-second modal emissions data from a 73-vehicle fleet of 1990 and 1991 light duty cars and trucks driven on the Federal Test Procedure (FTP) driving cycle were examined to determine remote sensing errors of commission in identifying high emissions vehicles. Results are combined with a similar analysis of errors of omission based on modal FTP data from high emissions vehicles. Extremely low errors of commission combined with modest errors of omission indicate that remote sensing should be very effective in isolating high CO and HC emitting vehicles in a fleet of late model vehicles on the road.     

In Situ Velocity Measurements from an Industrial Rotary Kiln Incinerator

Abstract

For the first time, velocities were measured inside a fieldscale rotary kiln incinerator. Combustion gas velocities and temperatures were measured at multiple points across a quadrant of the kiln near its exit using a bidirectional pressure probe and suction pyrometer. To accommodate the new bidirectional probe and gain access to the upper portion of the kiln, a lighter and stiffer positioning boom was designed. The kiln was directly fired using natural gas in a steady state mode. Results indicate strong vertical stratification of both velocity and temperature, with the highest values corresponding to the top of the kiln. Access restraints prevented the lower region of the kiln from being mapped. Horizontal variations in both temperature and velocity were insignificant. Operating conditions were varied by adjusting the amount of ambient air added to the front of the kiln. Increasing the flow of ambient air into the front of the kiln reduced the measured temperatures as expected, but did hot have as significant an effect on measured velocities. The quality of the results is examined by performing mass balances across the incinerator and by comparison to an existing numerical model. Both methods indicate that the experimental results are reasonable.     

Treatment of a high-strength sulphate-rich alkaline leachate using an anaerobic filter

The research looks at the feasibility of treating an alkaline sulphate-rich leachate arising from the co-disposal of municipal solid waste with cement kiln dust by means of an anaerobic filter (AF). This type of leachate with a high sulphate concentration is commonly prohibited for discharge to sewer and requires an on-site treatment solution. The AF used had a working volume of 4l and contained reticulated polyurethane foam as the biomass support material. The filters were operated over a 152 day experimental period during which the COD loading onto the filter was increased from 0.76 to 7.63kgCODm(-3)d(-1). In the early stages of operation at low loading, soluble sulphides accumulated that inhibited methanogenic activity. This was restored by dosing FeCl(3) to the reactor. The continued dosing allowed efficient COD removal of between 75% and 90% until the nominal retention time in the reactor was 3 days, at which point reactor performance declined significantly. The main mechanism for COD removal was by sulphate-reducing bacteria, which also resulted in up to 88% sulphate removal from the leachate. The average methane generation rate was 0.10lg(-1) COD removed. The results indicate the potential for using this approach as a pre-treatment that could significantly reduce the COD load to a second stage treatment process, but problems associated with the implementation of the technology at a larger scale have been identified.     

Climatic, socio-economic, and health factors affecting human vulnerability to cholera in the Lake Victoria basin, East Africa

Cholera epidemics have a recorded history in the eastern Africa region dating to 1836. Cholera is now endemic in the Lake Victoria basin, a region with one of the poorest and fastest growing populations in the world. Analyses of precipitation, temperatures, and hydrological characteristics of selected stations in the Lake Victoria basin show that cholera epidemics are closely associated with El Ni?o years. Similarly, sustained temperatures high above normal (T(max)) in two consecutive seasons, followed by a slight cooling in the second season, trigger an outbreak of a cholera epidemic. The health and socioeconomic systems that the lake basin communities rely upon are not robust enough to cope with cholera outbreaks, thus rendering them vulnerable to the impact of climate variability and change. Collectively, this report argues that communities living around the Lake Victoria basin are vulnerable to climate-induced cholera that is aggravated by the low socioeconomic status and lack of an adequate health care system. In assessing the communities' adaptive capacity, the report concludes that persistent levels of poverty have made these communities vulnerable to cholera epidemics.     

Speciation of five arsenic species (arsenite, arsenate, MMAAV, DMAAV and AsBet) in different kind of water by HPLC-ICP-MS

A method using Ion Chromatography hyphenated to an Inductively Coupled Plasma-Mass Spectrometer has been developed to accurately determine arsenite (As(III)), arsenate (As(V)), mono-methylarsonic acid (MMAA(V)), dimethylarsinic acid (DMAA(V)) and arsenobetaine (AsBet) in different water matrices. The developed method showed a high sensitivity with detection limits for each arsenic species close to 0.4pg injected. Arsenite and arsenate were the major species found in surface and well waters, but AsBet and DMAA(V) were found in some surface waters, which has never been reported before, while in some natural mineral waters located in volcanic region, the arsenic content exceeded the maximal admissible arsenic content by European legislation standards and the predominant form was As(V).     

Improved phytoaccumulation of cadmium by genetically modified tobacco plants (Nicotiana tabacum L.). Physiological and biochemical response of the transformants to cadmium toxicity

The response of tobacco plants (Nicotiana tabacum L.)--non-transformed and transformed with a metallothionein gene MThis from Silene vulgaris L.--to increase cadmium supply in the nutrient solution was compared. The transgenic plants accumulated significantly more Cd both in the roots and the leaves. Visual toxicity symptoms and disturbance in water balance were correlated with Cd tissue content. Treatment with 300 microM CdCl(2) resulted in inhibition of photosynthesis and mobilization of the ascorbate-glutathione cycle. Treatment with 500 microM CdCl(2) led to irreversible damage of photosynthesis and oxidative stress. An appearance of a new peroxidase isoform and changes in the leaf polypeptide pattern were observed at the highest Cd concentration. The level of non-protein thiols gradually increased following the Cd treatment both in transgenic and non-transformed plants.