Treatment of wastewater from red and tropical fruit wine production by zeolite anaerobic fluidized bed reactor

A study of the anaerobic treatment of wastewaters derived from red (RWWW) and tropical fruit wine (TFWWW) production was carried out in four laboratory-scale fluidized bed reactors with natural zeolite as bacterial support. These reactors operated at mesophilic temperature (35°C). Reactors R1 and R2 contained Chilean natural zeolite, while reactors R3 and R4 used Cuban natural zeolite as microorganism support. In addition, reactors R1 and R3 processed RWWW, while reactors R2 and R4 used TFWWW as substrate. The biomass concentration attached to zeolites in the four reactors studied was found to be in the range of 44–46 g volatile solids (VS)/L after 90 days of operation time. Both types of zeolites can be used indistinctly in the fluidized bed reactors achieving more than 80%–86% chemical oxygen demand (COD) removals for organic loading rates (OLR) of up to at least 20 g COD/L d. pH values remained within the optimal range for anaerobic microorganisms for OLR values of up to 20 and 22 g COD/L d for RWWW and TFWWW, respectively. Toxicity and inhibition levels were observed at an OLR of 20 g COD/L d in reactors R1 and R3 while processing RWWW, whereas the aforementioned inhibitory phenomena were not observed at an OLR of 24 g COD/L d in R2 and R4, treating TFWWW as a consequence of the lower phenolic compound content present in this substrate. The volatile fatty acid (VFA) levels were always lower in reactors processing TFWWW (R2 and R4) and these values (< 400 mg/L, as acetic acid) were lower than the suggested limits for digester failure. The specific methanogenic activity (SMA) was twice as high in reactors R2 and R4 than in R1 and R3 after 120 days of operation when all reactors operated at an OLR of 20 g COD/L d.     

Performance of a low cost MBT prior to landfilling: study of the biological treatment of size reduced MSW without mechanical sorting

In France, the interest in Mechanical Biological Treatment (MBT) prior to landfilling is actually growing. In the absence of acceptance criteria for the waste to be landfilled, an alternative to the intensive, high-technology MBT can only find its place in the French context if it shows substantial benefits from an environmental, economic or operational point of view. This paper presents an experiment of low-cost MBT of size reduced MSW without material splitting. The performance of an experimental, pilot-scale mechanical and biological treatment process has been studied on 37.5 Mg of raw municipal solid waste. The mechanical process has been kept simple with only coarse shredding and no material recovery. The biological treatment, which was a low-cost forced aeration process, was monitored for 25 weeks. The biogas production potential of the waste was reduced by 90% to 19 NL kgDM(-1). The initial AT4 index of 82.9 mg O2 gDM(-1) decreased to 16.0 mg O2 gDM(-1). After 25 weeks of aerobic treatment, the dry mass loss reached 37%, while the mass of waste going to landfill was reduced by 28%. The average performances of the process were explained by the biological process itself, which was not optimal, and also by the characteristics of the input waste. The high particle size of the treated waste and the high content of slowly biodegradable matter (such as paper and cardboard) may both be significant drawbacks for the biological stabilisation of waste.     

Waste materials for activated carbon preparation and its use in aqueous-phase treatment: a review

Commercial activated carbon is a preferred adsorbent for the removal of micropollutants from the aqueous phase; however, its widespread use is restricted due to high associated costs. To decrease treatment costs, attempts have been made to find inexpensive alternative activated carbon (AC) precursors, such as waste materials. Some reviews report the use of waste materials for the preparation of AC; however, these studies are restricted to either type of wastes, preparation procedures, or specific aqueous-phase applications. The present work reviews and evaluates literature dedicated both to the preparation of AC by recycling different types of waste materials and also to its application in various aqueous-phase treatments. It is clear that conventional (from agriculture and wood industry) and non-conventional (from municipal and industrial activities) wastes can be used to prepare AC, that can be applied in various aqueous treatment processes, namely to remove organic pollutants, dyes, volatile organic compounds, and heavy metals. Moreover, high surface areas can be obtained using either physical or chemical activation; however, combined treatments might enhance the surface properties of the adsorbent, therefore increasing its adsorption capacity. It is evident from the revision made that AC prepared from both conventional and non-conventional wastes might effectively compete with the commercial ones. This happens mostly when the activation procedures are optimized considering both the raw material used to produce the carbons and the contaminants to be removed.     

Analytic framework for assessing participation processes and outcomes of climate change adaptation tools

The assumptions and empirical evidence linking climate change adaptation to development cooperation have led to the emergence of a range of climate change adaptation tools aiming at improving the quality of development cooperation initiatives in times of global change. In order to assess the quality of these tools, we develop an analytic framework to critically assess the social learning and sustainable development outcomes of climate change adaptation tools. The analytic framework defines project objectives, participation typology, participation tools, participation stages, scenarios development, modelling exercises, stakeholder analysis and risk communication strategies that support quality participation outcomes.     

Limits of ecodesign: the case for open source product development

Abstract

In pursuit of coping mechanisms for the challenges of sustainable manufacturing, systematic methods have been developed to allow engineers to improve the ratio between products’ utility and environmental impact. These necessary efforts remain however limited if the surrounding production and consumption practices are not called into question at the same time. This article introduces open source product development as a potential approach for unlocking the limits of existing sustainable product design practices and to lead towards alternative and eco-efficient production and consumption practices termed as participative production. First, it discusses the potential advantages of this emerging practice in terms of environmental sustainability. Second, it provides a screened qualitative environmental analysis of 18 exemplary open source hardware products. Specific sustainable design principles implemented by these products are highlighted and discussed in order to identify challenges for further common research in the field of open source and sustainable product development.     

Availability of 99Tc in undisturbed soil cores

Models for safety assessment of radioactive waste repositories need accurate values of the soil-to-plant transfer of radionuclides. In oxidizing environments, (99)Tc is expected to occur as pertechnetate ((99)TcO(4)(-)). Due to its high mobility, leaching of this element in the field might be important, potentially affecting the reliability of estimated transfer parameters of (99)Tc as measured in closed experimental systems such as hydroponics or pot experiments. The aim of this experiment was to measure the leaching of (99)Tc in undisturbed irrigated soil cores under cultivation as well as plant uptake and to study the possible competition between the two transfer pathways. Undisturbed soil cores (50 x 50 cm) were sampled from a Rendzic Leptosol (R), a colluvial Fluvic Cambisol (F) and a Dystric Cambisol (D) using PVC tubes (three cores sampled per soil type). Each core was equipped with a leachate collector at the bottom, allowing the monitoring of (99)Tc leaching through the cores. Cores were placed in a greenhouse and maize (Zea mays L., cv. DEA, Pioneer) was sown. After 135 d, maize was harvested and radioactivity determined in both plant and water samples. Results showed that during the growing period, leaching of (99)Tc was limited, due to the high evapotranspiration rate of maize. After harvest, leaching of (99)Tc went on because of the absence of evapotranspiration. Effective uptake (EU) of (99)Tc in leaves and grains was calculated. EU reached 70% of the input in the leaves and was not significantly different among soils. These results confirmed those obtained from pot experiments, even though leaching was allowed to occur in close-to-reality hydraulical conditions. As a consequence, it was concluded that pot experiments are an adequate surrogate for more complex "close-to-reality" experimental systems for measuring transfer factors.     

Measuring water resource use efficiency of the Dong Nai River Basin (Vietnam): an application of the two-stage data envelopment analysis (DEA)

Environment, Development and Sustainability - The recent growth of agriculture, industry and urban areas in Vietnam requires a large amount of water consumption as a production factor. This paper...     

Spatial properties of nutrient concentrations in the Baltic Sea

Using existing monitoring data, the present study attempts to characterize spatial patterns of surface water nutrients in the Baltic Sea. The analysis was made for two different spatial scales, differences between and within sub-basins.Non-parametric methods were chosen to reduce problems with the distributional properties of the data. By dividing the data into four seasons care was taken as to seasonality. To avoid bias due to different laboratory analysis, only data from Nordic countries were used, whose results did not apparently depart from each other. Bias due to different sampling frequency was another problem. This was reduced by using only the last observation in each season for every station and year.The results suggested differences in the nutrient concentrations between basins. The two northernmost basins (Bothnian Bay and Bothnian Sea) had lower phosphate concentrations and higher silicate concentrations compared to the rest of the Sea. Bothnian Bay and the Gulf of Finland had higher nitrate concentrations.The concentration structure within basins was studied using transects in both latitudinal and longitudinal direction. A gradient for phosphate and nitrate was found in the Gulf of Finland, with lower concentrations at the mouth. The Bothnian Sea showed lower concentrations in the middle of the basin compared to the coasts. The highest concentrations of phosphate were found close to the Finnish coast and for silicate the highest concentrations were located near the Swedish coast. It was not possible to study variation in the west-east direction within the Baltic proper, due to data shortage. For the transects in the north-south direction no differences were detected for nitrate and silicate. Phosphate gave one significant result during autumn for the transect in the eastern part of the Baltic proper.This study revealed several problems associated with the data available. Uneven sampling in space and time put severe constraints on the study. A better design of the monitoring program is suggested, where spatial properties are considered explicitly. Revision of the program in this direction is needed for reasonable calculation of total amounts and concentrations representative for a basin.