The effects of using reprocessable material on the durability and mechanical properties of landfill leachate collection HDPE pipes

This paper investigated the durability and mechanical properties of landfill leachate collection HDPE pipes which had been made of different weight percent amounts of virgin and reprocessable HDPE compounds (VC and RC). Durability is reported base on the chemical properties, obtained through oxidative induction time (OIT) and melt flow index (MFI) measurements, at the temperature of 50 °C and over a period of 12 months immersion in a synthetic leachate. Mechanical properties are also described according to tensile and pressure tests which had been conducted on the pipes samples. All of the factors were examined had been affected by the addition of RC, but for the special combination the antioxidant depletion was significantly affected by the experimental aging condition and no important changes had been observed in the other pipe properties. The results from OIT tests indicate that the rate of antioxidant depletion is reduced by an increase in the weight percent amounts of RC, during the experimental aging condition. This reduction is probably attributed to the extraction of antioxidants from RC in their recovery process. Finally, although these results are related to the particular HDPE compound, antioxidant formulation and condition examined, but it can be said that the use of clean own reprocessable material for the production of landfill leachate pipes shall be permitted without limitations.     

A comparison of refrigerant management policies and suggestions for improvement in South Korea

HFCs (hydrofluorocarbons) emerged as alternative refrigerants after the production of chlorofluorocarbons was banned and hydrochlorofluorocarbons were phased out, under the Montreal Protocol on Substances that Deplete the Ozone Layer. However, because the Kyoto Protocol considered HFCs as greenhouse gases, and their impact on climate change has been increasing, major developed countries have been strengthening existing regulations on the use of HFCs as refrigerants. South Korea has also passed various legislations related to refrigerant management. However, reports indicate that implementation of these regulations has been ineffective, due to the absence of a specific system for managing the production, use, and disposal phases of refrigerants. To identify and resolve these issues, this study investigates the current state of refrigerant management in South Korea for those three phases. Refrigerant management policies are compared between different legislatures, using the examples of the European Union, United States, and Japan. Based on the findings, five types of measures are suggested to reduce the production and consumption of refrigerants, and to improve refrigerant management regulations in ways that are most appropriate to the South Korean context.     

Preparation of biochar catalyst with saccharide and lignocellulose residues of corncob degradation for corncob hydrolysis into furfural

This paper presented a novel process for production of furfural by hydrothermal degradation of corncob over biochar catalyst, in which it was prepared with the recycling degradation solution and lignocellulosic solid residues. The biochar catalyst was papered by lignocellulose residues and concentrated saccharide solution, and then impregnated in 0.5 mol/L sulphuric acid at room temperature for 24 h assisted by the ultrasonic vibration. In the system of recycling, 8.8 % lignocellulose residues and 100 % concentrated saccharide solution from corncob hydrolysis have been recycled. Hydrolysis of corncob was carried out at 180 °C for duration of 170 min over the biochar catalyst. The experimental results have shown that the furfural yield of up to 37.75 % and overall corncob conversion rate of 62.00 % could be achieved under optimum operating conditions for the catalysts preparation and the corncob hydrolysis. It is believed that the acid density of 4.27 mmol/g of biochar catalyst makes the SO₃H groups cleave β-1,4 glycosidic linkages effectively and hydrolyze the cellulose and hemicellulose to water-soluble sugars, as well as to facilitate dehydration of xylose to give the product of furfural.     

Films Made by Blending Poly(ε-Caprolactone) with Starch and Flour from Sagu Rhizome Grown at the Venezuelan Amazons

Starch-based composite films have been proposed as food packaging. In this context, the study of non-conventional starch sources (sagu, Canna edulis Kerr) has worldwide special attention, because these materials can impart different properties as carbohydrate polymers. A thorough study of the matrices used (sagu starch and flour) was carried out. In the same way, thermoplastic starch (TPS)/PCL blend and thermoplastic flour (TFS)/PCL blend were obtained by melt mixing followed by compression moulding containing glycerol as plasticizer. In this study, chemical composition of the matrices and their properties were related with the properties of the developed films. Moisture content, water solubility, X-ray diffraction, thermogravimetric analysis and mechanical and microstructural properties were evaluated in the films. Taking into account the results, the sagu flour has great potential as starchy source for food packaging applications. However, concretely the flour had lower compatibility with the PCL compared to the starch/PCL blend.     

Preparation and Fundamental Characterization of Cellulose Nanocrystal from Oil Palm Fronds Biomass

The objective of this work was to isolate cellulose nanocrystal (CNC) from oil palm fronds (Elaeis guineensis) and its subsequent characterization. Isolation involves sodium hydroxide/anthraquinone pulping with mechanical refining followed by total chlorine free bleaching (includes oxygen delignification, hydrogen peroxide oxidation and peracetic acid treatment) before acid hydrolysis. Bleaching significantly decreased kappa number and increased α-cellulose percentage of fibers as confirmed by Technical Association of the Pulp and Paper Industry standards. Transmission electron microscopy (TEM), X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetric analysis revealed that acid hydrolysis along with bleaching improved crystallinity index and thermal stability of the extracted nanocrystals. It was observed that CNC maintained its cellulose 1 polymorph despite hydrolysis treatment. Mean diameter as observed by TEM and average fiber aspect ratio of obtained CNC was 7.44 ± 0.17 nm and 16.53 ± 3.52, respectively making it suitable as a reinforcing material for nanocomposite.     

Environmentally Friendly Oil-Modified Polyesters as Polymeric Plasticizers for Poly(vinyl chloride)

Oil-modified polyesters were synthesized to serve as polymeric plasticizers for PVC. A total of four polymeric plasticizers with different average molecular weights were prepared. Characterizations were done using Fourier-transformed infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and gel permeation chromatography. Some of the tests conducted on PVC films include thermal stability test using thermogravimetric analyser, determination of glass transition temperature (T_g), plasticizer migration and leaching resistance test, morphology study of plasticized PVC films using field emission scanning microscope, toxicity test, and tensile test. Owing to the plasticizing effect of the palm oil-based compound, T_g of the plasticized PVC has decreased to an average of 65 °C at 20 wt% loading. The polymeric plasticizer is also able to contribute positively to the thermal stability and mechanical properties of the PVC films. Some of the advantages of incorporating polymeric plasticizer with high molecular weight includes lower rate of leaching from plastic, and improved tensile strength and elongation at break. Besides, thermal stability of the plastic studied using Kissinger’s and Flynn–Wall–Ozawa’s approaches shows that PVC blended with high molecular weight oil-modified polyester is more thermally stable, evidenced by the increase in the activation energy of decomposition, E_d. Toxicity test using brine shrimp egg shows encouraging results, where the oil-based plasticizer is considerably less toxic compared to some of the commercial plasticizers.     

Nearest neighbor methods for testing reflexivity

Nearest neighbor (NN) methods are widely employed for drawing inferences about spatial point patterns of two or more classes. We introduce a method for testing reflexivity in the NN structure (i.e., NN reflexivity) based on a contingency table which will be called reflexivity contingency table (RCT) henceforth. The RCT is based on the NN relationships among the data points and was used for testing niche specificity in literature, but we demonstrate that it is actually more appropriate for testing the NN reflexivity pattern. We derive the asymptotic distribution of the entries of the RCT under random labeling and introduce tests of reflexivity based on these entries. We also consider Pielou’s approach on RCT and show that it is not appropriate for completely mapped spatial data. We determine the appropriate null hypotheses and the underlying conditions/assumptions required for all tests considered. We investigate the finite sample performance of the tests in terms of empirical size and power by extensive Monte Carlo simulations and illustrate the methods on two real-life ecological data sets.     

Fourth-corner correlation is a score test statistic in a log-linear trait–environment model that is useful in permutation testing

Ecologists wish to understand the role of traits of species in determining where each species occurs in the environment. For this, they wish to detect associations between species traits and environmental variables from three data tables, species count data from sites with associated environmental data and species trait data from data bases. These three tables leave a missing part, the fourth-corner. The fourth-corner correlations between quantitative traits and environmental variables, heuristically proposed 20 years ago, fill this corner. Generalized linear (mixed) models have been proposed more recently as a model-based alternative. This paper shows that the squared fourth-corner correlation times the total count is precisely the score test statistic for testing the linear-by-linear interaction in a Poisson log-linear model that also contains species and sites as main effects. For multiple traits and environmental variables, the score test statistic is proportional to the total inertia of a doubly constrained correspondence analysis. When the count data are over-dispersed compared to the Poisson or when there are other deviations from the model such as unobserved traits or environmental variables that interact with the observed ones, the score test statistic does not have the usual chi-square distribution. For these types of deviations, row- and column-based permutation methods (and their sequential combination) are proposed to control the type I error without undue loss of power (unless no deviation is present), as illustrated in a small simulation study. The issues for valid statistical testing are illustrated using the well-known Dutch Dune Meadow data set.     

A graphical assessment and spatial clustering of the Deepwater Horizon oil spill impact on Laughing Gulls

The Deepwater Horizon oil spill occurred in the Gulf of Mexico on April 20, 2010. Considered the largest accidental marine oil spill in history, oil flowed for three months and approximately five million barrels of oil spilled through by mid-July 2010. In this article, we analyze bird data to assess the impact of the oil spill on the Gulf wildlife. Particularly, we want to determine in which regions Laughing Gulls were mostly affected by the oil spill, and whether those regions spatially shifted throughout the year 2010. Though our data sets have some limitations to apply statistical analysis methods, we obtained very interesting results. Our analyses showed the general consistency of the results based on two population data sets (from the 2011 Data Expo and from the eBird community) and justified the use of both publicly available data sets. We showed that the closer the surface oil spill area approached to the Laughing Gulls habitats, the more significant clusters of bird cases were observed.