Immissionsbelastungen im Umfeld des Flughafens München

The airborne immissions in the eastern surroundings to the new Munich airport have been investigated by means of different analytical methods between 1992 and 1995. For a detection of environmental impacts, bioindicators were applied to determine the pollution by PAH and to quantify the pollution by photooxidants. In addition, the PAH content in the upper soil layer was determined. During high pressure weather periods in summer the actual air pollution was investigated in the course of seven measuring campaigns. The PAH pollution of the soil is typical for rural background sites with highest concentrations in the close vicinity of busy roads, and exhibits no temporary trend. The actual input of PAH does not differ from the typical situation of rural regions in Bavaria at any measuring sites at all. Road traffic can be identified as the main PAH source in summer, whereas the considerably higher pollution in winter can be related to domestic heating. The pollution by photooxidants was found to be rather homogeneous throughout the eastern surroundings to the airport, being lowest at the sites directly influenced by road traffic. The pollution by volatile hydrocarbons at a busy road junction in the city of Erding is considerably higher than in the rural vicinity of the airport. The concentrations exhibit distinct daily courses which, among other things, can be related to atmospheric photooxidation. The hydroperoxides as secondary air pollutants exhibit an inverse course similar to that of ozone, with maximum values in the afternoon.     

Terricolous alpine lichens are sensitive to both load and concentration of applied nitrogen and have potential as bioindicators of nitrogen deposition

The influence of applied nitrogen (N) concentration and load on thallus chemistry and growth of five terricolous alpine lichen species was investigated in a three-month N addition study. Thallus N content was influenced by both concentration and load; but the relative importance of these parameters varied between species. Growth was most affected by concentration. Thresholds for effects observed in this study support a low critical load for terricolous lichen communities (<7.5 kg N ha⁻¹ y⁻¹) and suggest that concentrations of N currently encountered in UK cloudwater may have detrimental effects on the growth of sensitive species. The significance of N concentration effects on sensitive species also highlights the need to avoid artificially high concentrations when designing N addition experiments. Given the sensitivity of some species to extremely low loads and concentrations of N we suggest that terricolous lichens have potential as indicators of deposition and impact in northern and alpine ecosystems.     

Screening CO2 storage options in The Netherlands

This paper describes the development and application of a methodology to screen and rank Dutch reservoirs suitable for long-term large scale CO₂ storage. The screening focuses on off- and on-shore individual aquifers, gas and oil fields. In total 176 storage reservoirs have been taken into consideration: 138 gas fields, 4 oil fields and 34 aquifers, with a total theoretical storage potential of about 3200 Mt CO₂. The reservoirs are screened according to three criteria: potential storage capacity, storage costs and effort needed to manage risk. Due to the large number of reservoirs, which limits the possibility to use any pair-wise comparison method (e.g. Multi-Criteria programs such as Bosda or Naiade), a spreadsheet tool was designed to provide an assessment of each of the criteria through an evaluation of the fields present in the database and a set of scores provided by a (inter)national panel of experts. The assessment is sufficiently simple and allows others to review it, re-do it or expand it. The results of the methodology show that plausible comparisons of prospective sites with limited characterization data are possible.     

Prospects for cost-effective post-combustion CO2 capture from industrial CHPs

Industrial Combined Heat and Power plants (CHPs) are often operated at partial load conditions. If CO₂ is captured from a CHP, additional energy requirements can be fully or partly met by increasing the load. Load increase improves plant efficiency and, consequently, part of the additional energy consumption would be offset. If this advantage is large enough, industrial CHPs may become an attractive option for CO₂ capture and storage CCS. We therefore investigated the techno-economic performance of post-combustion CO₂ capture from small-to-medium-scale (50–200 MWe maximum electrical capacity) industrial Natural Gas Combined Cycle- (NGCC-) CHPs in comparison with large-scale (400 MWe) NGCCs in the short term (2010) and the mid-term future (2020–2025). The analyzed system encompasses NGCC, CO₂ capture, compression, and branch CO₂ pipeline.The technical results showed that CO₂ capture energy requirement for industrial NGCC-CHPs is significantly lower than that for 400 MWe NGCCs: up to 16% in the short term and up to 12% in the mid-term future. The economic results showed that at low heat-to-power ratio operations, CO₂ capture from industrial NGCC-CHPs at 100 MWe in the short term (41–44 €/tCO₂ avoided) and 200 MWe in the mid-term future (33–36 €/tCO₂ avoided) may compete with 400 MWe NGCCs (46–50 €/tCO₂ avoided short term, 30–35 €/tCO₂ avoided mid-term).     

Risk factors for increased BTEX exposure in four Australian cities

Benzene, toluene, ethylbenzene and xylenes (BTEX) are common volatile organic compounds (VOCs) found in urban airsheds. Elevated levels of VOCs have been reported in many airsheds at many locations, particularly those associated with industrial activity, wood heater use and heavy traffic. Exposure to some VOCs has been associated with health risks. There have been limited investigations into community exposures to BTEX using personal monitoring to elucidate the concentrations to which members of the community may be exposed and the main contributors to that exposure. In this cross sectional study we investigated BTEX exposure of 204 non-smoking, non-occupationally exposed people from four Australian cities. Each participant wore a passive BTEX sampler over 24h on five consecutive days in both winter and summer and completed an exposure source questionnaire for each season and a diary for each day of monitoring. The geometric mean (GM) and range of daily BTEX concentrations recorded for the study population were benzene 0.80 (0.04-23.8 ppb); toluene 2.83 (0.03-2120 ppb); ethylbenzene 0.49 (0.03-119 ppb); and xylenes 2.36 (0.04-697 ppb). A generalised linear model was used to investigate significant risk factors for increased BTEX exposure. Activities and locations found to increase personal exposure included vehicle repair and machinery use, refuelling of motor vehicles, being in an enclosed car park and time spent undertaking arts and crafts. A highly significant difference was found between the mean exposures in each of the four cities, which may be explained by differences in fuel composition, differences in the mix and density of industry, density of motor vehicles and air pollution meteorology.     

From COVID-19 to Green Recovery with natural capital accounting

The COVID-19 pandemic and related social and economic emergencies induced massive public spending and increased global debt. Economic recovery is now an opportunity to rebuild natural capital alongside financial, physical, social and human capital, for long-term societal benefit. Yet, current decision-making is dominated by economic imperatives and information systems that do not consider society’s dependence on natural capital and the ecosystem services it provides. New international standards for natural capital accounting (NCA) are now available to integrate environmental information into government decision-making. By revealing the effects of policies that influence natural capital, NCA supports identification, implementation and monitoring of Green Recovery pathways, including where environment and economy are most positively interlinked.     

Turbulent structures of buoyant jet in cross-flow studied through large-eddy simulation

Environmental Fluid Mechanics - In the present paper we study buoyant (plume) and non-buoyant (jet) fluid injection in a neutrally stratified uniform cross-flow. Both cases are of practical...     

Deconstructing compassionate conservation

Compassionate conservation focuses on 4 tenets: first, do no harm; individuals matter; inclusivity of individual animals; and peaceful coexistence between humans and animals. Recently, compassionate conservation has been promoted as an alternative to conventional conservation philosophy. We believe examples presented by compassionate conservationists are deliberately or arbitrarily chosen to focus on mammals; inherently not compassionate; and offer ineffective conservation solutions. Compassionate conservation arbitrarily focuses on charismatic species, notably large predators and megaherbivores. The philosophy is not compassionate when it leaves invasive predators in the environment to cause harm to vastly more individuals of native species or uses the fear of harm by apex predators to terrorize mesopredators. Hindering the control of exotic species (megafauna, predators) in situ will not improve the conservation condition of the majority of biodiversity. The positions taken by so-called compassionate conservationists on particular species and on conservation actions could be extended to hinder other forms of conservation, including translocations, conservation fencing, and fertility control. Animal welfare is incredibly important to conservation, but ironically compassionate conservation does not offer the best welfare outcomes to animals and is often ineffective in achieving conservation goals. Consequently, compassionate conservation may threaten public and governmental support for conservation because of the limited understanding of conservation problems by the general public.     

Is the trajectory of European Union environmental policy less certain?

ABSTRACT

The core themes and research questions of this volume, centred on the nature of environmental policy change in the European Union (EU), are laid out. An original heuristic framework to capture different dimensions, mechanisms and processes of policy change is presented. In order to contextualise the current situation, where EU policy scope has reached maturity and faces an uncertain future trajectory, EU environmental politics is divided into particular eras, looking closely at the nature of change in each period. This volume interrogates the extent to which change has occurred, the conditions or context within which it did/did not take place and the implications arising from stasis or change. The contributions to the volume are introduced and placed into the context of the broader trajectory of EU environmental policy.