Seasonal nestmate recognition in the ant Formica exsecta

Under favorable conditions, the mound-building ant Formica exsecta may form polydomous colonies and can establish large nest aggregations. The lack of worker aggression towards nonnestmate conspecifics is a typical behavioral feature in such social organization, allowing for a free flux of individuals among nests. However, this mutual worker toleration may vary over the seasons and on spatial scales. We studied spatio-temporal variation of worker–worker aggression within and among nests of a polydomous F. exsecta population. In addition, we determined inter- and intracolony genetic relatedness by microsatellite DNA genotyping and assessed its effect on nestmate recognition. We found significant differences in the frequency of worker exchange among nests between spring, summer, and autumn. Moreover, we found significant seasonal variation in the level of aggression among workers of different nests. Aggression levels significantly correlated with spatial distance between nests in spring, but neither in summer nor in autumn. Multiple regression analysis revealed a stronger effect of spatial distances rather than genetic relatedness on aggressive behavior. Because nestmate discrimination disappeared over the season, the higher aggression in spring is most plausibly explained by cue intermixing during hibernation.     

Entrapment and dissolution of DNAPLs in heterogeneous porous media

Two-dimensional multiphase flow and transport simulators were refined and used to numerically investigate the entrapment and dissolution behavior of tetrachloroethylene (PCE) in heterogeneous porous media containing spatial variations in wettability. Measured hydraulic properties, residual saturations, and dissolution parameters were employed in these simulations. Entrapment was quantified using experimentally verified hydraulic property and residual saturation models that account for hysteresis and wettability variations. The nonequilibrium dissolution of PCE was modeled using independent estimates of the film mass transfer coefficient and interfacial area for entrapped and continuous (PCE pools or films) saturations. Flow simulations demonstrate that the spatial distribution of PCE is highly dependent on subsurface wettability characteristics that create differences in PCE retention mechanisms and the presence of subsurface capillary barriers. For a given soil texture, the maximum and minimum PCE infiltration depth was obtained when the sand had intermediate (an organic-wet mass fraction of 25%) and strong (water- or organic-wet) wettability conditions, respectively. In heterogeneous systems, subsurface wettability variations were also found to enhance or diminish the performance of soil texture-induced capillary barriers. The dissolution behavior of PCE was found to depend on the soil wettability and the spatial PCE distribution. Shorter dissolution times tended to occur when PCE was distributed over large regions due to an increased access of flowing water to the PCE. In heterogeneous systems, capillary barriers that produced high PCE saturations tended to exhibit longer dissolution times.     

Sources of pesticides in surface waters in Switzerland: pesticide load through waste water treatment plants--current situation and reduction potential

Concentrations of pesticides in Swiss rivers and lakes frequently exceed the Swiss quality goal of 0.1 microg/l for surface waters. In this study, concentrations of various pesticides (e.g., atrazine, diuron, mecoprop) were continuously measured in the effluents of waste water treatment plants and in two rivers during a period of four months. These measurements revealed that in the catchment of Lake Greifensee, farmers who did not perfectly comply with 'good agricultural practice' caused at least 14% of the measured agricultural herbicide load into surface waters. Pesticides, used for additional purposes in urban areas (i.e. protection of materials, conservation, etc.), entered surface waters up to 75% through waste water treatment plants.     

Atmospheric lead and bromine in Germany: post-abatement levels,variabilities and trends

INTENTION, GOAL, SCOPE, BACKGROUND: Abatement measures since the 1970s have depleted lead and bromine levels in the atmosphere over large parts of Europe. Our knowledge of the atmospheric cycling of these elements while a several decade-long period of intensive mobilization reaches its end is incomplete. OBJECTIVE: We have characterized the trends in the atmospheric levels of Pb and Br and present-day temporal and spatial variabilities. METHODS: This was achieved by short-term (weeks) and long-term (years) measurements of particulate Pb and Br at various sites in Germany. Samples of atmospheric particulate matter were collected on filter membranes and analyzed by x-ray fluorescence. RESULTS AND DISCUSSION: Average Pb levels at rural and urban inland sites did not exceed concentrations in background aerosols, sampled at a Baltic Sea coastal site, by more than a factor of 3. Due to sea salt, bromide inland particulate Br levels are below those at a coastal site. There, non-sea salt Br, however, is significant as well. Urban Pb and Br levels are not necessarily higher than rural levels. The concentration levels have decreased in such a way that the previously common source, local vehicular traffic emissions, is no longer predominant. Regional rather than local sources have been increasingly determining the concentrations since the 1990s. This is more pronounced for Br than for Pb. We found indications for coal burning and long-range transport as significant Pb sources. For particulate Pb species, a range of ages (elapsed time since Pb emission) has been found. This range shows two maxima corresponding to characteristic times of 72 and 24 h. CONCLUSIONS: The (mean) atmospheric residence time of particulate Pb is longer than the residence time of Br, in particular in the wintertime. The chemical species contributing to atmospheric Pb should be addressed in future studies. RECOMMENDATION AND OUTLOOK: Clearly, despite effective abatement measures, atmospheric Pb will continue to be dominated by anthropogenic mobilization. The influence from long-range transport can be expected to decrease with the effectiveness of abatement programmes in neighbouring countries of the region.     

Solute transport in crystalline rocks at Aspö--II: blind predictions,inverse modelling and lessons learnt from test STT1

Based on the results from detailed structural and petrological characterisation and on up-scaled laboratory values for sorption and diffusion, blind predictions were made for the STT1 dipole tracer test performed in the Swedish Asp? Hard Rock Laboratory. The tracers used were nonsorbing, such as uranine and tritiated water, weakly sorbing 22Na(+), 85Sr(2+), 47Ca(2+)and more strongly sorbing 86Rb(+), 133Ba(2+), 137Cs(+). Our model consists of two parts: (1) a flow part based on a 2D-streamtube formalism accounting for the natural background flow field and with an underlying homogeneous and isotropic transmissivity field and (2) a transport part in terms of the dual porosity medium approach which is linked to the flow part by the flow porosity. The calibration of the model was done using the data from one single uranine breakthrough (PDT3). The study clearly showed that matrix diffusion into a highly porous material, fault gouge, had to be included in our model evidenced by the characteristic shape of the breakthrough curve and in line with geological observations. After the disclosure of the measurements, it turned out that, in spite of the simplicity of our model, the prediction for the nonsorbing and weakly sorbing tracers was fairly good. The blind prediction for the more strongly sorbing tracers was in general less accurate. The reason for the good predictions is deemed to be the result of the choice of a model structure strongly based on geological observation. The breakthrough curves were inversely modelled to determine in situ values for the transport parameters and to draw consequences on the model structure applied. For good fits, only one additional fracture family in contact with cataclasite had to be taken into account, but no new transport mechanisms had to be invoked. The in situ values for the effective diffusion coefficient for fault gouge are a factor of 2-15 larger than the laboratory data. For cataclasite, both data sets have values comparable to laboratory data. The extracted K(d) values for the weakly sorbing tracers are larger than Swedish laboratory data by a factor of 25-60, but agree within a factor of 3-5 for the more strongly sorbing nuclides. The reason for the inconsistency concerning K(d)s is the use of fresh granite in the laboratory studies, whereas tracers in the field experiments interact only with fracture fault gouge and to a lesser extent with cataclasite both being mineralogically very different (e.g. clay-bearing) from the intact wall rock.     

Dominance,kinship and reproductive value in female Barbary macaques (Macaca sylvanus) at Affenberg Salem

Summary In the course of a long-term study on social organization of semi-free-ranging Barbary macaques (Macaca sylvanus) at Affenberg Salem, genealogical and cross-genealogical rank relations of adult and adolescent females in three social groups were studied. Female rank was highly dependent on maternal rank, but the process of rank acquisition was also affected by age/size differences between members of different families. Mother-daughter rank reversal was rare, but all old, postreproductive matriarchs were outranked by their adult daughters. Contrary to findings of other studies on macaques, younger sisters seldom outranked older sisters. There was no genealogy with a strict age-inversed hierarchy among adult sisters as described for rhesus and Japanese macaques. Rank reversals between sisters were more frequent in genealogies with old or dead matriarchs, in large clans, and in dyads with an age difference of more than 1 year, indicating that demographic variables influence intra-genealogical dominance relations. It is suggested that close, long-lasting relationships between sisters and mothers and doughters impede rank reversals. Previous evolutionary models of female dominance relations in primates that explain rank relations among sisters as a function of their reproductive value or as a strategy of the mother to maintain her own status are not supported by the data. The results of this and other studies indicate that rank reversal between sisters is not as universal for Old World monkeys, or even macaques, as frequently proposed.     

Adaptive significance of sex ratio adjustment in semifree-ranging Barbary macaques (Macaca sylvanus) at Salem

Summary New data on the secondary sex ratio in semi-free-ranging Barbary macaques at Salem confirm the observation that the offspring of high-ranking females in this colony are biased towards sons while the offspring of low-ranking females are biased towards daughters. Analysis of interbirth intervals yielded no consistent differences in the relative costs of rearing male and female offspring for either high- or low-ranking females. Survivorship to adulthood of male and female offspring born to mothers of all rank classes was remarkably high, and there was no indication that juvenile females of low-ranking mothers face any greater risk. Daughters of high- and low-ranking mothers showed no substantial differences in reproductive success, while mating and probably reproductive success of sons seemed to be dependent on maternal rank, at least at the beginning of their reproductive career. The results suggest that variation in sex ratio does increase parental fitness. Offprint requests to: A. Paul     

2,4-二硝基甲苯与共存化合物对发光菌的联合毒性

对2,4-二硝基甲苯与共存化合物对发光菌联合毒性的测定结果表明:2,4-二硝基甲苯与邻二硝基苯共存时,对发光菌的联合毒性为协同作用:分别与三种苯的氨基衍生物共存时.联合毒性为拮抗作用,这种拮抗作用与取代基数目、空间位阻等因素有关     

Tiefentschwefelte Kraftstoffe

In recent years, much attention has been given to the desulphurization of fuels like diesel oil and gasoline, since exhaust gases containing SOx cause air pollution and acid rain. Moreover, a lower sulphur content of fuels would allow the use of new engines and catalytic systems for the reduction of CO, particle and NOx-emissions, and a more efficient fuel consumption. The S-level in fuels is presently limited in Germany for gasoline and diesel oll to 150 ppm and 350 ppm, respectively. In 2005 the level will be decreased Europe-wide for all vehicle-fuels down to 50 ppm; in some countries, fuels are or will be on the market with even less sulphur. The current technology of hydrodesulphurization (heterogeneous, catalyzed hydrorreating of organic sulphur compounds) can desulphurize quite adequately down to today’s S-level. The process, however, is limited for the production of ultra-low sulphur fuels, and the expenses (pressure, reactor size, investment costs, energy consumption, specific active catalysts) are high to meet future requirements. alternative processes, which are not limited to hydrotreating, are therefore desirable. Beside an overview about hydrotreating, this paper presents two quite different alternatives: Extraction of sulphur compounds by ionic liquids and the synthetic production of S-free fuels from natural gas by Fischer-Tropsch-synthesis. Ionic liquids (ILs) are low melting (<100°C) salts which represent a new class of non-molecular, ionic solvents. In the experiments presented, extraction of model diesel oils (dibenzothiophene and dodecanthiol in n-dodecane) as well as of a real predesulphurized diesel oil (with about 400 ppm S) were investigated. The results show the excellent and selective extraction properties of ILs for organic sulphur compounds, especially with regard to those compounds which are very difficult to remove by common hydrodesulphurization. As expected, the desulphurization by extraction is much more complicated in case of real diesel oil (compared to a model oil) due to its complex chemical composition including many different sulphur compounds and other impurities like organic nitrogen and metal-compounds. Nevertheless, the results with pre-desulphurized diesel oil are also very promising. So, extraction of sulphur components by ILs is a new approach for deep desulphurization of diesel oil. The application of very mild process conditions (low pressure and temperature) in comparison to traditional hydrotreating is an additional advantage of this new concept. An alternative to today’s fuels based on crude oil is the production of gasoline and diesel oil from natural gas (or other fossil fuels like coal) by Fischer-Tropsch-synthesis (FTS). The products like diesel oil are completely free of sulphur and other impurities like nitrogen and metal compounds. Although several FTS-processes have been investigated and developed, and some processes are already running on a technical scale, a real breakthrough was not obtained up to now. The production costs of these capital-intensive processes are probably above the breakeven point, at least at today’s oil price. In this paper, a ‘lowcost’ process is discussed, which is based on nitrogen-rich syngas. In contrast to classical FTS-processes with nitrogen-free syngas, the investment costs are probably lower: The syngas is produced by partial oxidation with ait, which eliminates the need of an air separation plant, while a process with nitrogen-rich syngas does not utilize a recycle loop and a recycle compressor.