巢湖藻华易堆积区蓝藻时空分布的研究

巢湖西半湖采样分析结果表明夏季蓝藻水华主要集聚于湖滨带。因此选择西半湖藻华易堆积的区域,并监测在风力驱使下蓝藻水华的时空分布规律,分析湖滨带浮游植物生物量与理化因子的相关性。结果表明：湖滨带水华生物量的分布容易受到风向和天气的影响;水体的叶绿素a浓度与总氮（TN）、总磷（TP）和高锰酸钾指数（CODMn）呈显著的正相关（p<001）;湖滨带水体中微囊藻（Microcystis）的生物量几乎占据水体总浮游植物生物量的95%以上,而且越靠近湖岸带微囊藻的生物量所占的比例越大。据此,可以选择湖滨带水华易聚集区作为蓝藻水华尤其是微囊藻去除的重点区域,以有效地削减蓝藻水华污染,从而为巢湖水生态系统的修复创造条件     

Nutritionally relevant elements in staple foods: influence of arable site versus choice of variety

Eighteen representative sites for the Austrian grain-growing and eight for the potato-growing zones (soils and crops) were investigated. On each site, total element contents (B, Ba, Ca, Cd, Co, Cu, Fe, K, Li, Mg, Mn, Mo, Na, P, Sr and Zn) were determined in 4–12 varieties of winter wheat (n = 136), 6 varieties of spring durum wheat (n = 30), 5 varieties of winter durum wheat (n = 15), 7 varieties of rye (n = 49), 5 varieties of spring barley (n = 30) and 5 varieties of potatoes (n = 40). Element accumulations in grain species and potato tubers varied significantly with site conditions, with the main exceptions for B in potatoes and wheat as well as for Zn, Cu and Co in durum wheat. On average, across all investigated sites, differences in varieties occurred concerning the elements Ca, Cd, Ba, Sr and Zn (except Zn in potatoes and winter durum). A rough estimation revealed that an average Austrian consumer of wheat, rye and potatoes meets more than 50% of the needs of daily element intake for K, P and Mg, between 36 and 72% for Fe, Zn and Cu, and more than 100% for Co, Mo and Mn. In particular, the elements Ca and Na have to be added from other sources.     

Distribution,fate and formation of non-extractable residues of a nonylphenol isomer in soil with special emphasis on soil derived organo-clay complexes

Anthropogenic contaminants like nonylphenols (NP) are added to soil, for instance if sewage-sludge is used as fertilizer in agriculture. A commercial mixture of NP consists of more than 20 isomers. For our study, we used one of the predominate isomers of NP mixtures, 4-(3,5-dimethylhept-3-yl)phenol, as a representative compound. The aim was to investigate the fate and distribution of the isomer within soil and soil derived organo-clay complexes. Therefore, ¹⁴C- and ¹³C-labeled NP was added to soil samples and incubated up to 180 days. Mineralization was measured and soil samples were fractionated into sand, silt and clay; the clay fraction was further separated in humic acids, fulvic acids and humin. The organo-clay complexes pre-incubated for 90 or 180 days were re-incubated with fresh soil for 180 days, to study the potential of re-mobilization of incorporated residues. The predominate incorporation sites of the nonylphenol isomer in soil were the organo-clay complexes. After 180 days of incubation, 22 % of the applied ¹⁴C was mineralized. The bioavailable, water extractable portion was low (9 % of applied ¹⁴C) and remained constant during the entire incubation period, which could be explained by an incorporation/release equilibrium. Separation of organo-clay complexes, after extraction with solvents to release weakly incorporated, bioaccessible portions, showed that non-extractable residues (NER) were preferentially located in the humic acid fraction, which was regarded as an effect of the chemical composition of this fraction. Generally, 27 % of applied ¹⁴C was incorporated into organo-clay complexes as NER, whereas 9 % of applied ¹⁴C was bioaccessible after 180 days of incubation. The re-mobilization experiments showed on the one hand, a decrease of the bioavailability of the nonylphenol residues due to stronger incorporation, when the pre-incubation period was increased from 90 to 180 days. On the other hand, a shift of these residues from the clay fraction to other soil fractions was observed, implying a dynamic behavior of incorporated residues, which may result in bioaccessibility of the NER of nonylphenol.     

Biomonitoring of heavy metals in the feathers of House crow (Corvus splendens) from some metropolitans of Asia and Africa

Environmental Science and Pollution Research - Urban-dwelling birds can be useful biomonitors to assess the impact of the urbanisation on both public and wildlife health. Widely distributed urban...     

果树缺铁矫正新技术—高渗液注射法

本文概述了植物的铁素营养、果材缺铁黄化病的诊断治疗方法，论述了高涌液注射法矫治果树缺铁黄化病的理论、假说、树木微型注射器、克黄灵高渗液、树干穴位注射法、树干穴位插管法及其应用前景。     

Coping,individual differences,and strain: A longitudinal study of short-term role overload

This study attempted to determine which personality dimensions and coping strategies would reduce or prevent strain in a context of naturally-occurring short-term role overload. Subjects were 106 adult undergraduate evening students enrolled in an intensive three-week summer school session. The median age was 26 years, and 72 per cent of the students worked full-time. Using a repeated-measures panel design, the study tested the effectiveness of three types of coping derived from Hall's (1972) typology. Longitudinal analysts using cross-lagged correlations and structural regressions showed little support for the predicted effects of Hall's three types of coping on subsequent strain. However, a fourth type of coping, Planned Task Management emerged during the analysis and showed a reciprocal relationship with strain. Both variables appeared to influence each other over time, although the effect of prior coping on subsequent strain was slightly but not significantly stronger. Also, alienation (defined as lack of commitment) had a significant moderator effect on the relationship between perceived overload and strain.     

Multicriteria evaluation of simulated logging scenarios in a tropical rain forest

Forest growth models are useful tools for investigating the long-term impacts of logging. In this paper, the results of the rain forest growth model FORMIND were assessed by a multicriteria decision analysis. The main processes covered by FORMIND include tree growth, mortality, regeneration and competition. Tree growth is calculated based on a carbon balance approach. Trees compete for light and space; dying large trees fall down and create gaps in the forest. Sixty-four different logging scenarios for an initially undisturbed forest stand at Deramakot (Malaysia) were simulated. The scenarios differ regarding the logging cycle, logging method, cutting limit and logging intensity. We characterise the impacts with four criteria describing the yield, canopy opening and changes in species composition. Multicriteria decision analysis was used for the first time to evaluate the scenarios and identify the efficient ones. Our results plainly show that reduced-impact logging scenarios are more 'efficient' than the others, since in these scenarios forest damage is minimised without significantly reducing yield. Nevertheless, there is a trade-off between yield and achieving a desired ecological state of logged forest; the ecological state of the logged forests can only be improved by reducing yields and enlarging the logging cycles. Our study also demonstrates that high cutting limits or low logging intensities cannot compensate for the high level of damage caused by conventional logging techniques.     

Heavy metal release from contaminated soils: comparison of column leaching and batch extraction results

Heavy metals in soils may adversely affect environmental quality. In this study, we investigated the release of Zn, Cd, Pb, and Cu from four contaminated soils by column leaching and single and sequential batch extractions. Homogeneously packed soil columns were leached with 67 mL/g 10(-2) M CaCl2 to investigate the exchangeable metal pool and subsequently with 1400 mL/g 10(-2) M CaCl2 adjusted to pH 3 to study the potential of metal release in response to soil acidification. In two noncalcareous soils (pH 5.7 and 5.1), exchange by Ca resulted in pronounced release peaks for Zn and Cd that were coupled to the exchange of Mg by Ca, and 40 to 70% of total Zn and Cd contents were rapidly mobilized. These amounts compared well with exchangeable pools determined in single and sequential batch extractions. In two soils with near-neutral pH, the effluent concentrations of Zn and Cd were several orders of magnitude lower and no pronounced elution peaks were observed. This behavior was also observed for Cu and Pb in all four soils. When the soils were leached at pH 3, the column effluent patterns reflected the coupling of CaCO3 dissolution (if present) and other proton buffering reactions, proton-induced metal release, and metal-specific readsorption within the soil column. Varying the flow rate by a factor of five had only minor effects on the release patterns. Overall, Ca exchange and subsequent acidification to pH 3 removed between 65 and 90% of total Zn, Cd, Pb, and Cu from the four contaminated soils.     

Permits and effluent charges in the water pollution control policies of France,West Germany,and the Netherlands

In this article the water pollution control policies of these countries and their effects on emitters are analyzed. In the Netherlands, local water control boards levy pollution charges on both direct and indirect emitters. The charges are based upon measured emissions and actual treatment costs and they vary among the boards. Discharges into surface waters are by permission only. West German law sets nationally uniform rates only for direct emitters and some pollutants, irrespective of treatment costs. The States (Länder), however, may make indirect emitters liable to pay as well. In France, river basin agencies charge emitters and grant discounts where abatement facilities have been installed. Further policy instruments are tax cuts, subsidies, and standards set on local and national levels. France, in this complex policy, also uses contrats de branche where government and industries agree by contract on pollution abatement. Evidence shows that all these policies have reduced water pollution. As emissions decrease, problems of overcapacity might occur where collective water treatment plants have been installed already. Moreover, investment in additive abatement technology may inhibit the introduction of low-waste, integrated technologies. Yet the development of the latter, though expensive in the short run, should enable industry to meet more stringent standards in the future.