放牧阉牦牛提前出栏甲烷排放强度减排潜力探讨

以阉牦牛提前出栏项目活动为例,按照2006年IPCC国家温室气体清单优良做法指南的计量方法,在同等牧草利用量的前提下,分别对4岁和7岁阉牦牛一生CH4排放总量和单位体重CH4排放量(即排放强度)进行了初步比较分析.发现在同等牧草利用量的基础上,由于饲养一头7岁阉牦牛一生所消耗的牧草量相当于可饲养2.1头4岁的阉牦牛所消耗的牧草量,所以从CH4排放总量而言,前者一生排放CH4总量比后者少86.3 kg.然而,由于后者总体重比前者重192 kg,所以,后者的单位体重CH4排放强度(以CH4/体重计)只有0.973 kg·kg-1,而前者为1.374 kg·kg-1.根据排放强度的概念,在同等牧草消耗量的基础上,如果将一头7岁阉牦牛替代成饲养2.1头4岁的阉牦牛,可以多生产192 kg的活体重,在同样生产192 kg活重的基础上,利用替代法估算后者饲养方式比前者饲养方式可以实现77 kg CH4减排量,即相当于总减排1.6 t CO2当量.因此,基于排放强度减排而不是总量减排的概念,提前出栏有较大的CH4减排潜力.     

矿山智能移动安全检查系统与闭环运行模式设计

针对传统安全检查模式的缺陷,以Android智能移动设备为载体,采用三角形算法和位置指纹识别算法进行定位,设计了便携式智能移动安全检查终端;在Eclipse集成环境下,采用B/S架构设计了综合分析处理终端;采用Socket和JSON数据交换模式,实现了智能移动安全检查终端与综合分析处理终端数据的交互与同步;在此基础上,构建面向检查对象的闭环安全检查运行模式,开发了闭环安全检查运行模式的流程。该研究结果可提高安全检查的效能,实现安全检查的信息化和数据化,进而促进安全标准化的实施。     

外浮顶储罐密封圈爆燃事故防控技术研究

分析了外浮顶储罐密封圈燃爆事故的主要原因及危害,研究了密封圈爆燃事故防控技术,提出了雷电防护、密封圈防爆及火灾控制的解决方案。建立了油罐密封圈模拟装置,分别开展了密封圈爆燃事故防控技术的试验研究。结果表明:该解决方案可以有效地消除外浮顶储罐密封圈爆燃事故的风险,扑灭密封圈初期火灾,大幅提高储罐的本质安全水平。研究成果在外浮顶储罐开展了工程实际应用,取得良好的效果。     

植物CytP450和抗氧化酶对土壤菲、芘暴露的生态毒理响应

以玉米(Zea mays L.)为供试植物,草甸棕壤为供试土壤,以微粒体细胞色素P450含量、超氧化物歧化酶(SOD)、过氧化氢酶(CAT)和过氧化物酶(POD)活性为指标,进行了土壤菲、芘暴露的生态毒理响应研究.结果表明,菲、芘暴露均能引起植物代谢解毒和抗氧化防御系统的胁迫响应,不同程度引发植物代谢解毒及抗氧化能力的改变.P450酶活性与低浓度菲、芘单-暴露浓度具有相关性(r=0.834,P<0.01),与菲、芘复合暴露浓度负相关,说明菲、芘复合暴露导致代谢解毒能力下降,对植物的代谢解毒具有协同毒性效应;SOD酶活性与菲、芘单一暴露浓度负相关,CAT酶活性与菲、芘单-暴露浓度正相关,POD酶活性与菲的水溶解度正相关,而与芘的总浓度负相关.SOD、CAT和POD酶活性与菲、芘复合暴露浓度均呈正相关,说明菲、芘复合暴露导致氧化损伤程度减弱,对植物的氧化损伤具有拮抗作用.     

大型浮顶储罐浮盘密封圈雷击起火事故分析

通过对近年来连续发生的大型浮顶储罐浮盘密封圈雷击起火原因分析,找出了浮顶储罐浮盘密封存在的安全问题,探讨了浮盘密封形式与储罐雷击起火事故的关系,并提出对策措施.     

采用大流量泡沫炮扑救大型储罐全面积火灾的探讨

简要分析了大型储罐全面积火灾着火面积大、热辐射强、易复燃、破坏力强等特点,指出了这类火灾的主要扑救难点是远距离作战、消防物资消耗大、战术要求高等。从泡沫液最低流量、泡沫液喷射方式和泡沫液选型3方面提出了用于扑救大型储罐全面积火灾的大流量泡沫炮的要求,指出泡沫炮的最小流量应不低于20000L/min,利用蛋白泡沫液采用集中喷射方式进行灭火。     

Environmental assessment of green hardboard production coupled with a laccase activated system

European consumption of wood-based panels reached record levels in recent years driven mostly by demand from end-use sectors: residential construction, furniture, cabinets, flooring and mouldings. The main panel types are composite boards such as particleboard, high density fiberboard (HDF), medium-density fiberboard (MDF) and other adhesively bonded composites such as plywood and wet-process fiberboard (hardboard). The synthetic resins used in their manufacture come from non-renewable resources, such as oil and gas. Several consequences are associated to this type of adhesives: variation in the availability and cost of these wood adhesives depends on raw materials, the formaldehyde emissions as well as the limited recyclability of the final product. Hence, in the search for alternatives to petroleum-based wood adhesives, efforts are being devoted to develop adhesives by using phenolic substitutes based on lignin, tannin or starch. In this context, the forest industry is increasingly approaching to enzyme technology in the search of solutions. The main goal of this study was to assess the environmental impacts during the life cycle of a new process for the manufacture of hardboards manufacture, considering the use of a two-component bio-adhesive formulated with a wood-based phenolic material and a phenol-oxidizing enzyme. This new product was compared to the one manufactured with the conventional phenol-formaldehyde resin. The study covers the life cycle of green hardboards production from a cradle-to-gate perspective, analysing in detail the hardboard plant and dividing the process chain in three subsystems: Fibers Preparation, Board Forming and Board Finishing.Auxiliary activities such as chemicals, bio-adhesive, wood chips, thermal energy and electricity production and transport were included within the system boundaries.Global warming (GW), photochemical oxidant formation (PO), acidification (AC) and eutrophication (EP) were the impact categories analysed in this study. Additionally, the cumulative energy demand was evaluated as another impact category. According to the results, four stages significantly influenced the environmental burdens of the production system: laccase production, on-site thermal energy and electricity production as well as wood chipping stage. Due to the environmental impact associated to the production of green bonding agents, a sensitivity analysis with special focus on the eutrophying emissions was carried out by evaluating the amount of laccase and lignin based phenolic material used. The combined reduction in both bonding agents may slightly reduce the contributions to this impact category. In addition, a hypothetical scenario with no laccase and with a higher concentration of the lignin based material (25% more) could improve the environmental profile in all impact categories with a reduction of 1.5% in EP.Further research should focus mainly on laccase production, in order to reduce its energy demand as well as on the amount of green adhesive required to obtain mechanical and swelling properties similar to those of conventional hardboard.     

Sperm carriers in Silurian sea scorpions

Invasion of the land by arachnids required adaptations of numerous organs, such as gills evolving into lungs, as well as mechanisms facilitating sperm transfer in a terrestrial environment. Many modern arachnids use spermatophores for this purpose, i.e. sperm transmitters detached from the body. Exceptionally preserved Silurian (423?Ma) fossils of Eurypterus tetragonophthalmus Fischer, 1839 (Chelicerata: Eurypterida) preserve so-called 'horn organs' which we here demonstrate as being equivalent to the spermatophore-producing parts of the genital tract in certain modern arachnids. This clarifies a long-running debate about sexing eurypterids based on the shape of the median abdominal (or genital) appendage. To our knowledge this is also the oldest direct evidence for spermatophore-mediated sperm transfer in the fossil record and suggests that eurypterids had evolved mating techniques using spermatophores as early as the Silurian, a valuable prerequisite for life on land. Spermatophores are absent in sea spiders (Pycnogonida) and horseshoe crabs (Xiphosura); thus the shared presence of sclerotized sperm-transfer devices in eurypterids and arachnids is a novel character, newly elucidated here, which offers explicit support for (Eurypterida + Arachnida). For this clade the name Sclerophorata n. nov. is proposed. Arachnida can be further defined by fusion of the originally paired genital opening.     

广州地区典型灰霾过程及不同天气类型下边界层高度研究

利用2013年9月—2014年11月广州地区激光雷达观测结果,使用小波分析反演边界层高度(PBLH),通过归一化后向散射信号(NRB)的小波分解对小波分析中直接影响PBLH识别的尺度因子a进行了选取.并以2014年1月发生的一次灰霾过程为例,对灰霾过程的PBLH等边界层特征进行了分析,并对边界层垂直结构进行了初步探究.同时,利用自组织映射神经网络(SOM)进行了天气分型,对整个观测时段激光雷达反演的PBLH与天气型之间的关系进行了统计.结果表明,通过对NRB廓线的小波分解,小波分析尺度因子a取300较为合适.灰霾过程中PBLH均存在日变化.从平均结果来看,PBLH最高值出现在13:00,为850 m;最低值出现在5:00,为483 m.灰霾过程PBLH与PM_(2.5)之间呈显著负相关(r=-0.62,p0.01),风速与PM_(2.5)之间也呈显著负相关(r=-0.39,p0.01).对流边界层平均高度约为稳定边界层的1.5倍,峰值高度约为稳定边界层的3倍.低压天气系统控制下灰霾天气出现的概率较低,对应的PBLH明显较高,峰值高度在1200～1600 m,日间边界层发展极为明显.而高压天气系统控制下边界层发展容易受到抑制,峰值高度均低于1000 m.     

A framework for investigating the air quality variation characteristics based on the monitoring data: Case study for Beijing during 2013–2016

In this study, an analysis framework based on the regular monitoring data was proposed for investigating the annual/inter-annual air quality variation and the contributions from different factors(i.e., seasons, pollution periods and airflow directions), through a case study in Beijing from 2013 to 2016. The results showed that the annual mean concentrations(MC) of PM_(2.5), SO_2, NO_2 and CO had decreased with annual mean ratios of 7.5%, 28.6%, 4.6%and 15.5% from 2013 to 2016, respectively. Among seasons, the MC in winter contributed the largest fractions(25.8%～46.4%) to the annual MC, and the change of MC in summer contributed most to the inter-annual MC variation(IMCV) of PM_(2.5) and NO2. For different pollution periods, gradually increase of frequency of S-1(PM_(2.5), 0～ 75 μg/m~3) made S-1 become the largest contributor(28.8%) to the MC of PM_(2.5) in 2016, it had a negative contribution(-13.1%) to the IMCV of PM_(2.5); obvious decreases of frequencies of heavily polluted and severely polluted dominated(44.7% and 39.5%) the IMCV of PM_(2.5). For different airflow directions, the MC of pollutants under the south airflow had the most significant decrease(22.5%～62.5%), and those decrease contributed most to the IMCV of PM_(2.5)(143.3%),SO2(72.0%), NO_2(55.5%) and CO(190.3%); the west airflow had negative influences to the IMCV of PM_(2.5), NO_2 and CO. The framework is helpful for further analysis and utilization of the large amounts of monitoring data; and the analysis results can provide scientific supports for the formulation or adjustment of further air pollution mitigation policy.