Persistence of C-labeled atrazine and its residues in a field lysimeter soil after 22 years

Twenty-two years after the last application of ring-¹⁴C-labeled atrazine at customary rate (1.7 kg ha⁻¹) on an agriculturally used outdoor lysimeter, atrazine is still detectable by means of accelerated solvent extraction and LC-MS/MS analysis. Extractions of the 0-10 cm soil layer yielded 60% of the residual ¹⁴C-activity. The extracts contained atrazine (1.0 μg kg⁻¹) and 2-hydroxy-atrazine (42.5 μg kg⁻¹). Extractions of the material of the lowest layer 55-60 cm consisting of fine gravel yielded 93% of residual ¹⁴C-activity, of which 3.4 μg kg⁻¹ was detected as atrazine and 17.7 μg kg⁻¹ was 2-hydroxy-atrazine. The detection of atrazine in the lowest layer was of almost four times higher mass than in the upper soil layer. These findings highlight the fact that atrazine is unexpectedly persistent in soil. The overall persistence of atrazine in the environment might represent a potential risk for successive groundwater contamination by leaching even after 22 years of environmental exposure.     

Cyanide phytoremediation by water hyacinths (Eichhornia crassipes)

Although cyanide is highly toxic, it is economically attractive for extracting gold from ore bodies containing only a few grams per 1000 kg. Most of the cyanide used in industrial mining is handled without observable devastating consequences, but in informal, small-scale mining, the use is poorly regulated and the waste treatment is insufficient. Cyanide in the effluents from the latter mines could possibly be removed by the water hyacinth Eichhornia crassipes because of its high biomass production, wide distribution, and tolerance to cyanide (CN) and metals. We determined the sodium cyanide phytotoxicity and removal capacity of E. crassipes. Toxicity to 5-50 mg CN L(-1) was quantified by measuring the mean relative transpiration over 96 h. At 5 mgCNL(-1), only a slight reduction in transpiration but no morphological changes were observed. The EC(50) value was calculated by probit analysis to be 13 mgCNL(-1). Spectrophotometric analysis indicated that cyanide at 5.8 and 10 mgL(-1) was completely eliminated after 23-32 h. Metabolism of K(14)CN was measured in batch systems with leaf and root cuttings. Leaf cuttings removed about 40% of the radioactivity from solution after 28 h and 10% was converted to (14)CO(2); root cuttings converted 25% into (14)CO(2) after 48 h but only absorbed 12% in their tissues. The calculated K(m) of the leaf cuttings was 12 mgCNL(-1), and the V(max) was 35 mg CN(kg fresh weight)(-1)h(-1). Our results indicate that E. crassipes could be useful in treating cyanide effluents from small-scale gold mines.     

Distribution and incorporation mode of the herbicide MCPA in soil derived organo-clay complexes

The incorporation of xenobiotics into soil, especially via covalent bonds or sequestration has a major influence on the environmental behavior including toxicity, mobility, and bioavailability. The incorporation mode of 4-chloro-2-methylphenoxyacetic acid (MCPA) into organo-clay complexes has been investigated under a low (8.5 mg MCPA/kg soil) and high (1000 mg MCPA/kg soil) applied concentration, during an incubation period of up to 120 days. Emphasis was laid on the elucidation of distinct covalent linkages between non-extractable MCPA residues and humic sub-fractions (humic acids, fulvic acids, and humin). The cleavage of compounds by a sequential chemical degradation procedure (OH^?, BBr₃, RuO₄, TMAH thermochemolysis) revealed for both concentration levels ester/amide bonds as the predominate incorporation modes followed by ether linkages. A possible influence of the soil microbial activity on the mode of incorporation could be observed in case of the high level samples. Structure elucidation identified MCPA as the only nonextractable substance, whereas the metabolite 4-chloro-2-methylphenol was additionally found as bioavailable and bioaccessible compound.     

Distribution, fate and formation of non-extractable residues of a nonylphenol isomer in soil with special emphasis on soil derived organo-clay complexes

Anthropogenic contaminants like nonylphenols (NP) are added to soil, for instance if sewage-sludge is used as fertilizer in agriculture. A commercial mixture of NP consists of more than 20 isomers. For our study, we used one of the predominate isomers of NP mixtures, 4-(3,5-dimethylhept-3-yl)phenol, as a representative compound. The aim was to investigate the fate and distribution of the isomer within soil and soil derived organo-clay complexes. Therefore, (14)C- and (13)C-labeled NP was added to soil samples and incubated up to 180 days. Mineralization was measured and soil samples were fractionated into sand, silt and clay; the clay fraction was further separated in humic acids, fulvic acids and humin. The organo-clay complexes pre-incubated for 90 or 180 days were re-incubated with fresh soil for 180 days, to study the potential of re-mobilization of incorporated residues. The predominate incorporation sites of the nonylphenol isomer in soil were the organo-clay complexes. After 180 days of incubation, 22 % of the applied (14)C was mineralized. The bioavailable, water extractable portion was low (9 % of applied (14)C) and remained constant during the entire incubation period, which could be explained by an incorporation/release equilibrium. Separation of organo-clay complexes, after extraction with solvents to release weakly incorporated, bioaccessible portions, showed that non-extractable residues (NER) were preferentially located in the humic acid fraction, which was regarded as an effect of the chemical composition of this fraction. Generally, 27 % of applied (14)C was incorporated into organo-clay complexes as NER, whereas 9 % of applied (14)C was bioaccessible after 180 days of incubation. The re-mobilization experiments showed on the one hand, a decrease of the bioavailability of the nonylphenol residues due to stronger incorporation, when the pre-incubation period was increased from 90 to 180 days. On the other hand, a shift of these residues from the clay fraction to other soil fractions was observed, implying a dynamic behavior of incorporated residues, which may result in bioaccessibility of the NER of nonylphenol.     

Remote monitoring of air pollutant emissions from point sources by a mobile lidar/sodar system

This paper describes remote monitoring of air pollutant emissions by a mobile lidar (light detection and ranging)/ sodar (sound detection and ranging) system. First, measurements are carried out in the flue gas plume of a public power plant. The investigations focus mainly on quantifying SO2 emissions, but the uncertainties of such measurements are also emphasized. Furthermore, an example providing valuable data sets for the development and validation of plume dispersion models is outlined with measurements of the dilution of SO2 along the plume axis. Series of repeated determinations of SO2 emissions show a large variation in the obtained flux values, with moderate margins of error. Incomplete recording of the plume within the individual lidar scans, induced by strong looping movements of the flue gas plume, predominantly causes the variations of flux values. Therefore, the highest flux values determined are considered to be the most exact. This is verified by a comparison of measured fluxes with in situ measurements made by the plant operators. The results further indicate that lidar measurements illustrate the location and dimension of aerosol plumes better than the location and dimension of the plumes of gaseous compounds. The wind direction affecting the plume at any moment can be determined faster by lidar than by sodar because the latter requires much longer time intervals of signal averaging. Measurements show higher concentrations of SO2 compared with results from a Gaussian plume model for periods of less than 5 min after dispersion. The findings emphasize the suitability of remote sensing for detecting emissions and for investigating the propagation and dilution of air pollutant plumes.     

Observation and origin of organochlorine compounds and polycyclic aromatic hydrocarbons in the free troposphere over central Europe

On Zugspitze (2670 m a.s.l.), Alps, higher concentrations were observed during a winter than during a summer measurement campaign of PAHs, chlorobenzenes (43.6 vs. 2.0 pg m⁻³) and DDTs (3.7 vs. 1.2 pg m⁻³), while hexachlorocyclohexanes and PCBs were found at similar levels. The PCB, HCH and DDT levels are among the lowest ever reported from outside the Arctic. Mostly lower levels were found in samples collected in summer than in winter despite a significant boundary layer air influence, but no such influence on samples collected during the winter campaign. Boundary layer influence was quantified by Lagrangian particle dispersion model retroplume analyses. Photochemical lifetimes corresponding to k_OH < 1.5 × 10⁻¹² cm³ molec⁻¹ s⁻¹ are found for p,p′-DDT, k_OH < 0.75 × 10⁻¹² cm³ molec⁻¹ s⁻¹ for p,p′-DDE and k_OH < 1.0 × 10⁻¹² cm³ molec⁻¹ s⁻¹ for p,p′-DDD.     

Noninvasive characterization of the Trecate (Italy) crude-oil contaminated site: links between contamination and geophysical signals

The characterization of contaminated sites can benefit from the supplementation of direct investigations with a set of less invasive and more extensive measurements. A combination of geophysical methods and direct push techniques for contaminated land characterization has been proposed within the EU FP7 project ModelPROBE and the affiliated project SoilCAM. In this paper, we present results of the investigations conducted at the Trecate field site (NW Italy), which was affected in 1994 by crude oil contamination. The less invasive investigations include ground-penetrating radar (GPR), electrical resistivity tomography (ERT), and electromagnetic induction (EMI) surveys, together with direct push sampling and soil electrical conductivity (EC) logs. Many of the geophysical measurements were conducted in time-lapse mode in order to separate static and dynamic signals, the latter being linked to strong seasonal changes in water table elevations. The main challenge was to extract significant geophysical signals linked to contamination from the mix of geological and hydrological signals present at the site. The most significant aspects of this characterization are: (a) the geometrical link between the distribution of contamination and the site’s heterogeneity, with particular regard to the presence of less permeable layers, as evidenced by the extensive surface geophysical measurements; and (b) the link between contamination and specific geophysical signals, particularly evident from cross-hole measurements. The extensive work conducted at the Trecate site shows how a combination of direct (e.g., chemical) and indirect (e.g., geophysical) investigations can lead to a comprehensive and solid understanding of a contaminated site’s mechanisms.     

Internationally harmonized approach to biomonitoring trace element atmospheric deposition

The International Atomic Energy Agency (IAEA) has been systematically supporting work on biomonitoring air pollution using plants since 1997. Such studies are presently being supported by the IAEA in 14 countries within a co-ordinated research project. The main emphasis of this project is on (1) identification of suitable biomonitors of atmospheric pollution for local and/or regional application, and (2) their validation for general environmental monitoring, whenever possible. Although the participants are using different plants as biomonitors in their research in geographically and climatically diverse parts of the world, they are harmonising sampling approaches and analytical procedures. In this paper, an overview of these activities is given, along with the details, where possible. In all of these activities, proficiency testing and analytical quality assurance are important issues, which merit special attention. Within the scope of an intercomparison exercise, two lichen materials were distributed among the participating laboratories and a proficiency test was organised. The results obtained proved satisfactory performance for most participating laboratories.     

Investigations on the binding mechanism of the herbicide simazine to dissolved organic matter in leachates of compost

14C-labelled simazine was composted together with biowaste on a pilot (m3) scale. The herbicide was quickly bound to the compost matrix. By aqueous extraction of 29 and 200 days old compost (equivalent to thermophilic and mesophilic phase of composting) only 4.2% and 3.1% respectively of the radioactivity in the compost samples could be extracted with water. Analysis of the extracts using high-performance size exclusion chromatography (HPSEC) revealed that the dissolved organic matter (DOM) had molecular weights ranging between 2 and 28 kDa. The amount of DOM-associated radioactivity increased from 53% (day 29) to 65% (day 200) of total extractable radioactivity. The type of binding of the 14C-labelled residues and the DOM was elucidated by silylation of humic matter and subsequent HPSEC. The data demonstrated that besides polar metabolites also intact simazine was bound to the DOM. A distinct shift from rather weak interactions to strong covalent linkages of simazine and its metabolites with increasing age of the compost was observed. The results showed that only low amounts of free simazine and its degradates can be extracted with water. We concluded that the shift towards stable covalent linkages is equivalent to a detoxification of the contaminant in aged compost. Consequently, the use of the analysed compost in its mature stage should not pose an environmental risk to the groundwater or the subsoil.