Comparison of two methods for the determination of total organic halogen (TOX) in receiving waters

Two methods for the determination of total organic halogen (TOX), orginating from bleaching of pulp, in receiving waters have been compared. One of the methods (AC/MC) is based on adsorption of the halogenated matter onto an activated carbon sorbent. The halogen is determined by a microcoulometric technique after combustion of the carbon. The other method (XAD/PT) uses an XAD resin as sorbent and the determination of the halogen is carried out by potentiometric titration after a schöniger combustion of the resin eluate.Both methods showed good performance for samples consisting of spent bleach liquors diluted with distilled, fresh and brackish water. The repeatability was very good with a relative standard deviation less than a few per cent. The detection limit of the AC/MC method is about 0.1 μmol/1 and for the XAD/PT method about ten times higher. The AC/MC method gave in most cases 10–20% higher TOX concentrations compared to the XAD/PT method.     

Melamine-based organoclay to sequester atrazine

Sequestration of aqueous atrazine by organoclays prepared from the surfactant 6-piperazin-1-yl-N,N'-bis-(1,1,3,3-tetramethyl-butyl)-(1,3,5)triazine-2,4-diamine and Gonzales bentonite was assessed using 14C-labeled atrazine. Organoclays with varying ratios of surfactant to clay were evaluated with respect to their ability to sequester atrazine from an aqueous solution. Organoclays containing 100-200 g kg-1 surfactant on a total weight basis provided the most efficient adsorption of atrazine, with apparent KOC values exceeding 5000 l kg-1 at these loading fractions. Less than 12% of sequestered atrazine was released during four sequential day long washings, supporting our expectation that the majority of the reaction of atrazine with the surfactant lead to irreversible chemical bond formation through nucleophilic aromatic substitution.     

Sources and fate of butyltins in the St. Lawrence Estuary ecosystem

Butyltins (BTs) were determined in sediment, zooplankton, benthic fish and invertebrates in the St. Lawrence Estuary and its mixing zone with the Gulf of St. Lawrence (Canada) in an attempt to assess sources and fate of these compounds in a large ecosystem before the enforcement of the world-wide ban of TBT-based antifouling paints. All BTs (MBT, DBT and TBT) were found along the studied area (450 km) where the traffic of large vessels occurs around the year. Concentrations of total butyltins (BTs) in surface sediment were below 6 ng Sn g(-1) d.w. Total BTs concentrations found in zooplankton samples at the mouth of the Saguenay Fjord were the highest (793 ng Sn g(-1) d.w.), indicating the influence of the Fjord on the St. Lawrence contamination. Although a relatively low contamination level was measured in sediment, total BTs concentrations ranged from 9 to 489 ng Sn g(-1) d.w. for benthic organisms. Biota-sediment accumulation factors (BSAFs), calculated on the basis of the organic carbon content in the sediment (concentrations normalized to 1% Corg), ranged from 0.9 to 98.3, and are an indicator of an important source of BTs from the Saguenay Fjord particulate matter. This may be explained by the fact that when TBT is released in a large and deep well stratified coastal environment, it could bind to the suspended particulate matter and then be taken in charge by water column organisms and may be mostly metabolised before it reaches bottom sediment. Sediment is not considered as the main contributor to the contamination of fish and invertebrates. It is expected that any reduction of direct inputs of TBT from ship hulls in a near future should result in a rapid reduction of butyltins in the St. Lawrence ecosystem.     

PAH dissipation in spiked soil: impacts of bioavailability, microbial activity, and trees

While trees have demonstrated potential in phytoremediation of several organic contaminants, little is known regarding their ability to impact the common soil contaminant PAHs. Several species of native North American trees were planted in soil artificially contaminated with three PAHs. Plant biomass, PAH dissipation, and microbial mineralization were monitored over the course of one year and environmental conditions were allowed to follow typical seasonal patterns. PAH dissipation and mineralization were not affected by planting. Extensive and rapid loss of PAHs was observed and attributed to high bioavailability and microbial activity in all treatments. The rate of this loss may have masked any significant planting effects. Anthracene was found to be more recalcitrant than pyrene or phenanthrene. Parallel soil aging studies indicated that sequestration to soil components was minimal. Contrary to common inferences in literature, amendment with decaying fine roots inhibited PAH degradation by the soil microbial community. Seasonal variation in environmental factors and rhizosphere dynamics may have also reduced or negated the effect of planting and should be taken into account in future phytoremediation trials. The unique root traits of trees may pose a challenge to traditional thought regarding PAH dissipation in the rhizosphere of plants.     

Organochlorine contaminants in complete clutches of Morelet's crocodile (Crocodylus moreletii) eggs from Belize

Seven complete clutches of Morelet's crocodile (Crocodylus moreletii) eggs were collected in northern Belize and examined for organochlorine (OC) pesticide residues. The primary OC detected, p,p-DDE, was found in every egg analyzed (n=175). Other OCs detected included p,p-DDT, p,p-DDD, methoxychlor, aldrin, and endosulfan I. Concentrations of individual OCs ranged from 4 ppb (ng chemical/g egg wet weight) to greater than 500 ppb. A statistical evaluation of p,p-DDE levels in three complete clutches was used to derive the minimum number of eggs needed from a clutch to precisely determine the mean p,p-DDE concentration representative of that clutch. Sample sizes of 8 (80% confidence level) and 11 (90% confidence level) were determined to yield an accurate estimate of contaminant levels in a full clutch of eggs. The statistically recommended sample size of 11 eggs (at 90% confidence level) was successfully tested on the four additional clutches.     

Photocatalytic oxidation of soot by P25 TiO2 films

The photomineralisation of soot by P25 titania films is studied using FT-IR and the process shown to involve the oxidation of carbon to CO2 exclusively. The efficiency of this process is low, however, with a formal quantum efficiency of 1.1 x 10(-4) molecules of carbon oxidized per incident photon of UVA light. The cause of this low efficiency is attributed largely to the less than intimate contact between the fibrous soot layer and the surface of the photocatalyst.     

Seasonal and spatial patterns of metals at a restored copper mine site II. Copper in riparian soils and Bromus carinatus shoots

Soil and plants were sampled throughout winter and spring near a perennial stream traversing a restored mine site in a winter-rainy climate. Within 1m of an acidic reach of the stream, soil had pH 3-5 and 50-100 microg/g "bioavailable" copper (extractable with 0.01 M CaCl2). Soil 2-3 m from the stream had pH 5-8 and lower (less than 3 microg/g) bioavailable copper. "Oxide-bound" copper (extractable with 2N HCl) was 50-100 microg/g at most locations. Copper concentrations in the shoots of field-collected Bromus carinatus declined from 20 microg/g in winter to 2 microg/g in spring at all sampling sites. A similar temporal pattern was found in plants grown under controlled conditions. Thus B. carinatus has a developmental program for control of shoot copper concentration, causing a seasonally-varying pattern of copper phytoaccumulation over a large range of copper availability in the soil.     

Effects of sulfur dioxide and nitric oxide on mercury oxidation and reduction under homogeneous conditions

This paper is particularly related to elemental mercury (Hg0) oxidation and divalent mercury (Hg2+) reduction under simulated flue gas conditions in the presence of nitric oxide (NO) and sulfur dioxide (SO2). As a powerful oxidant and chlorinating reagent, Cl2 has the potential for Hg oxidation. However, the detailed mechanism for the interactions, especially among chlorine (Cl)-containing species, SO2, NO, as well as H2O, remains ambiguous. Research described in this paper therefore focused on the impacts of SO2 and NO on Hg0 oxidation and Hg2+ reduction with the intent of unraveling unrecognized interactions among Cl species, SO2, and NO most importantly in the presence of H2O. The experimental results demonstrated that SO2 and NO had pronounced inhibitory effects on Hg0 oxidation at high temperatures when H2O was also present in the gas blend. Such a demonstration was further confirmed by the reduction of Hg2+ back into its elemental form. Data revealed that SO2 and NO were capable of promoting homogeneous reduction of Hg2+ to Hg0 with H2O being present. However, the above inhibition or promotion disappeared under homogeneous conditions when H2O was removed from the gas blend.     

Evaluation of diffusive gradients in thin film (DGT) samplers for measuring contaminants in the Antarctic marine environment

This work has been the first application of DGT samplers for measuring metals in water and sediment porewater in the Antarctic environment, and whilst DGT water sampling was restricted to quantification of Cd, Fe and Ni, preconcentration using Empore chelating disks provided results for an additional nine elements (Sn, Pb, Al, Cr, Mn, Co, Cu, Zn, As). Although higher concentrations were measured for some metals (Cd, Ni, Pb) using the Empore technique, most likely due to particulate-bound or colloidal species becoming entrapped in the Empore chelating disks, heavy metal concentrations in the impacted Brown Bay were found to be comparable with the non-impacted O'Brien Bay. Sediment porewater sampling using DGT also indicated little difference between Brown Bay and O'Brien Bay for many metals (Cd, Al, Cr, Co, Ni, Cu), however, greater amounts of Pb, Mn, Fe and As were accumulated in DGT probes deployed in Brown Bay compared with O'Brien Bay, and a higher accumulation of Sn was observed in Brown Bay inner than any of the other three sites sampled. Comparison of DGT derived porewater concentrations with actual porewater concentrations showed limited resupply of Cd, Pb, Al, Cr, Mn, Co, Ni, Cu, Zn and As from the solid phase to porewater, with these metals appearing to be strongly bound to the sediment, however, resupply of Fe and Sn was apparent. Based upon our observations here, we suggest that Sn, and to a lesser extent Pb, are critical contaminants.