Spatial variability of arsenic concentration in soils and plants, and its relationship with iron, manganese and phosphorus

Spatial distribution of arsenic (As) concentrations of irrigation water, soil and plant (rice) in a shallow tube-well (STW) command area (8 ha), and their relationship with Fe, Mn and P were studied. Arsenic concentrations of water in the 110 m long irrigation channel clearly decreased with distance from the STW point, the range being 68-136 μg L⁻¹. Such decreasing trend was also noticed with Fe and P concentrations, but the trend for Mn concentrations was not remarkable. Concerning soil As, the concentration showed a decreasing tendency with distance from the pump. The NH₄-oxalate extractable As contributed 36% of total As and this amount of As was associated with poorly crystalline Fe-oxides. Furthermore only 22% of total As was phosphate extractable so that most of the As was tightly retained by soil constituents and was not readily exchangeable by phosphate. Soil As (both total and extractable As) was significantly and positively correlated with rice grain As (0.296 ± 0.063 μg g⁻¹, n = 56). Next to drinking water, rice could be a potential source of As exposure of the people living in the As affected areas of Bangladesh.     

Influence of mass transfer characteristics for DNAPL source depletion and contaminant flux in a highly characterized glaciofluvial aquifer

The transfer of contaminant mass between the nonaqueous- and aqueous-phases is a process of central importance for the remediation of sites contaminated by dense nonaqueous-phase liquids (DNAPLs). This paper describes a comparison of the results obtained with various alternative DNAPL-aqueous-phase mass transfer models contained in the literature for predicting DNAPL source-zone depletion times in groundwater systems. These dissolution models were largely developed through laboratory column experiments. To gain insight into the implications of various representations of the local-scale kinetic as well as equilibrium DNAPL dissolution processes, aquifer heterogeneity and the complex architecture of a DNAPL source-zone, the aqueous-phase contaminant concentrations and mass fluxes arriving at a down-gradient compliance boundary are analyzed in a conditional stochastic framework. The hydrogeologic setting is a heterogeneous fluvial aquifer in Southwest Germany, referred to as the aquifer analog dataset, that was intensively characterized in three dimensions for hydrogeological parameters that include permeability, effective porosity, grain size, mineralogy and sorption coefficients. By embedding the various dissolution models into the compositional, multiphase flow model, CompFlow, the relative times predicted for complete depletion of a released DNAPL source due to natural dissolution are explored. Issues related to achieving environmental benefits through, for example, partial DNAPL-zone source removal via enhanced remedial technologies are also discussed. In this context, performance metrics in the form of peak aqueous-phase contaminant concentrations and mass fluxes arriving at a down-gradient compliance boundary are compared to each other. This is done for each of the alternative mass transfer models. A significant reduction in the fractional flux at a downstream location from the DNAPL source can be achieved by partial source-zone mass reduction; however, peak concentration levels at the same location remain much higher than the United States Environment Protection Agency (US-EPA) drinking water limits. Although groundwater quality was found to improve more rapidly for the equilibrium dissolution model, it is also shown that dissolution models that promote rapid DNAPL disappearance produce greater prediction uncertainty in the aqueous-phase flux reduction.     

Treatment of PAHs in contaminated soil by extraction with aqueous DNA followed by biodegradation with a pure culture of Sphingomonas sp

The biodegradation of polycyclic aromatic hydrocarbons (PAHs) in aqueous deoxyribonucleic acid (DNA) solution from contaminated soil washing was investigated. Initial data with a model effluent consisting of anthracene, phenanthrene, pyrene and benzo[a]pyrene that were individually dissolved in 1% aqueous DNA solution confirmed their positive degradation by Sphingomonas sp. at around 10(8)CFU mL(-1) initial cell loading. For anthracene and phenanthrene, complete removal was achieved within 1h treatment. Degradation of pyrene and benzo[a]pyrene took a relatively longer time of a few days and weeks, respectively. DNA-dissolved PAHs were also degraded relatively faster than PAH crystals in aqueous medium to suggest that the binding of the PAHs in the polymer does not pose serious constraint to bacterial uptake. The DNA was stable against the PAH-degrading bacteria. Parallel experiments with actual DNA solutions obtained during pyrene extraction from an artificially spiked soil also showed similar results. Close to 100% pyrene degradation was achieved after 1d treatment. With its chemical stability, the cell-treated DNA was re-used up to four cycles without a considerable decline in extraction performance.     

Chloride leaching from air pollution control residues solidified using ground granulated blast furnace slag

Ground granulated blast furnace slag (ggbs) has been used to solidify air pollution control (APC) residues obtained from a major UK energy-from-waste plant. Samples were prepared with ggbs additions between 10 and 50 wt% of total dry mass and water/solids ratios between 0.35 and 0.80. Consistence, setting time, compressive strength and leaching characteristics have been investigated. Results indicated that the highly alkaline nature of APC residues due to the presence of free lime can be used to activate ggbs hydration reactions. Increasing ggbs additions and reducing the water content resulted in increased compressive strengths, with 50 wt% ggbs samples having average 28 d strengths of 20.6 MPa. Leaching tests indicate low physical encapsulation and minimal chemical fixation of chloride in ggbs solidified APC residues. The results suggest that more than 50 wt% ggbs additions would be required to treat APC residues to meet the current waste acceptance criteria limits for chloride.     

Increased thyroid volume, prevalence of thyroid antibodies and impaired fasting glucose in young adults from organochlorine cocktail polluted area: outcome of transgenerational transmission?

In 137 females (F) and 94 males (M) aged 21-35 years from organochlorines (OCs) polluted area (POLL) increased thyroid volume (ThV), prevalence of antibodies to thyroperoxidase (TPOab), thyrotropin receptor (TRab) and of impaired fasting glucose (IFG) was found compared to 116 F and 107 M from background pollution area (BCGR). In F and M from POLL also strikingly increased level of PCBs, DDE and HCB was found. Such findings were compared to the generation of their parents aged 41-55 years consisting of 320F/213M from POLL and 406F/231M from BCGR. However, in spite of strikingly lower level of those OCs in young adults from POLL, they showed about the same prevalence of adverse health signs as the old generation. From such reason 44 young F and 40 young M with lowest PCBs level from POLL were selected to obtain nearly the same PCB level as found in all young F and M from BCGR. In such PCB adjusted groups the prevalence of TPOab, TRab, IFG and increased ThV was still significantly higher than that in all young subjects from BCGR. At the same time, also the level of DDE and HCB in such PCBs adjusted groups was considerably lower. It was concluded that such adverse effects in young adults from POLL possibly did not result from their actual OCs levels, but very likely from their exposure to high OCs levels of their mothers during their prenatal and perinatal life. Thus, the data may be compatible with present views on transgenerational transmission of endocrine disruptors action.     

A photolysis coefficient for characterizing the response of aqueous constituents to photolysis

UV photolysis and UV based advanced oxidation processes (AOPs) are gaining more and more attention for drinking water treatment. Quantum yield (ø) and molar absorption coefficient (ε) are the two critical parameters measuring the effectiveness of photolysis of a compound. The product of the two was proposed as a fundamental measure of a constituent’s amenability to transformation by photolysis. It was shown that this product, named the photolysis coefficient, k _p , can be determined using standard bench tests and captures the properties that govern a constituent’s transformation when exposed to light. The development showed the photolysis coefficient to be equally useful for microbiological, inorganic and organic constituents. Values of k _p calculated by the authors based on quantum yield and molar absorption coefficient data from the literature were summarized. Photolysis coefficients among microorganisms ranged from 8500 to more than 600000 and are far higher than for inorganic and organic compounds, which varied over a range of approximately 10 to 1000 and are much less sensitive to UV photolysis than the microorganisms.